FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Length of Crest when Discharge and Velocity is not considered Formula

GoLength of Crest given Discharge Passing over Weir Formula

GoLength of Crest without considering Velocity Formula

Fx Copy

LaTeX Copy

Length of Weir Crest is the measurement or extent of Weir Crest from end to end. Check FAQs

L w = \frac{Q Fr'}{1.84 \cdot {H Stillwater}^{\frac{3}{2}}}

L_w - Length of Weir Crest?Q_Fr' - Francis Discharge with Suppressed End?H_Stillwater - Still Water Head?

Length of Crest when Discharge and Velocity is not considered Example

With values

With units

Only example

Here is how the Length of Crest when Discharge and Velocity is not considered equation looks like with Values.

Here is how the Length of Crest when Discharge and Velocity is not considered equation looks like with Units.

Here is how the Length of Crest when Discharge and Velocity is not considered equation looks like.

0.8975 = \frac{28}{1.84 \cdot {6.6}^{\frac{3}{2}}}

0.8975m = \frac{28m³/s}{1.84 \cdot {6.6m}^{\frac{3}{2}}}

0.8975 = \frac{28}{1.84 \cdot {6.6}^{\frac{3}{2}}}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Hydraulics and Waterworks » fx Length of Crest when Discharge and Velocity is not considered

Length of Crest when Discharge and Velocity is not considered Solution

Follow our step by step solution on how to calculate Length of Crest when Discharge and Velocity is not considered?

FIRST Step Consider the formula

L w = \frac{Q Fr'}{1.84 \cdot {H Stillwater}^{\frac{3}{2}}}

Next Step Substitute values of Variables

∴

L w = \frac{28m³/s}{1.84 \cdot {6.6m}^{\frac{3}{2}}}

Next Step Prepare to Evaluate

∴

L w = \frac{28}{1.84 \cdot {6.6}^{\frac{3}{2}}}

Next Step Evaluate

∴

L w = 0.897479019949055m

LAST Step Rounding Answer

∴

L w = 0.8975m

Length of Crest when Discharge and Velocity is not considered Formula Elements

Variables

Length of Weir Crest

Length of Weir Crest is the measurement or extent of Weir Crest from end to end.

Symbol: L_w

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Length of Weir Crest

Francis Discharge with Suppressed End

Francis Discharge with Suppressed End is discharge of flow without the end contraction.

Symbol: Q_Fr'

Measurement: Volumetric Flow RateUnit: m³/s

Note: Value should be greater than 0.

Formulas to find Francis Discharge with Suppressed End

Still Water Head

Still Water Head is the head of water which is still over weir.

Symbol: H_Stillwater

Measurement: LengthUnit: m

Note: Value can be positive or negative.

Formulas to find Still Water Head

Other Formulas to find Length of Weir Crest

Go Length of Crest given Discharge Passing over Weir

L w = \frac{Q Fr' \cdot 3}{2 \cdot C d \cdot \sqrt{2 \cdot g} \cdot ({(S w + H V)}^{\frac{3}{2}} - {H V}^{\frac{3}{2}})}

Go Length of Crest without considering Velocity

L w = {(\frac{Q Fr \cdot 2}{3 \cdot C d \cdot \sqrt{2 \cdot g}})}^{\frac{2}{3}} + (0.1 \cdot n \cdot S w)

Go Length of Crest considering Velocity

L w = (\frac{3 \cdot Q Fr'}{2 \cdot C d \cdot \sqrt{2 \cdot g} \cdot ({H Stillwater}^{\frac{3}{2}} - {H V}^{\frac{3}{2}})}) + (0.1 \cdot n \cdot H Stillwater)

Go Length of Crest when Francis Formula Discharge and Velocity is not considered

L w = (\frac{Q Fr}{1.84 \cdot {S w}^{\frac{3}{2}}}) + (0.1 \cdot n \cdot S w)

How to Evaluate Length of Crest when Discharge and Velocity is not considered?

Length of Crest when Discharge and Velocity is not considered evaluator uses Length of Weir Crest = Francis Discharge with Suppressed End/(1.84*Still Water Head^(3/2)) to evaluate the Length of Weir Crest, Length of Crest when Discharge and Velocity is not considered is given as it applies to the area of reclamation can be defined as ' The distance, measured along the axis. Length of Weir Crest is denoted by L_w symbol.

How to evaluate Length of Crest when Discharge and Velocity is not considered using this online evaluator? To use this online evaluator for Length of Crest when Discharge and Velocity is not considered, enter Francis Discharge with Suppressed End (Q_Fr') & Still Water Head (H_Stillwater) and hit the calculate button.

FAQs on Length of Crest when Discharge and Velocity is not considered

What is the formula to find Length of Crest when Discharge and Velocity is not considered?

The formula of Length of Crest when Discharge and Velocity is not considered is expressed as Length of Weir Crest = Francis Discharge with Suppressed End/(1.84*Still Water Head^(3/2)). Here is an example- 0.897479 = 28/(1.84*6.6^(3/2)).

How to calculate Length of Crest when Discharge and Velocity is not considered?

With Francis Discharge with Suppressed End (Q_Fr') & Still Water Head (H_Stillwater) we can find Length of Crest when Discharge and Velocity is not considered using the formula - Length of Weir Crest = Francis Discharge with Suppressed End/(1.84*Still Water Head^(3/2)).

What are the other ways to Calculate Length of Weir Crest?

Here are the different ways to Calculate Length of Weir Crest-

Length of Weir Crest=(Francis Discharge with Suppressed End*3)/(2*Coefficient of Discharge*sqrt(2*Acceleration due to Gravity)*((Height of Water above Crest of Weir+Velocity Head)^(3/2)-Velocity Head^(3/2)))
Length of Weir Crest=((Francis Discharge*2)/(3*Coefficient of Discharge*sqrt(2*Acceleration due to Gravity)))^(2/3)+(0.1*Number of End Contraction*Height of Water above Crest of Weir)
Length of Weir Crest=((3*Francis Discharge with Suppressed End)/(2*Coefficient of Discharge*sqrt(2*Acceleration due to Gravity)*(Still Water Head^(3/2)-Velocity Head^(3/2))))+(0.1*Number of End Contraction*Still Water Head)

Can the Length of Crest when Discharge and Velocity is not considered be negative?

No, the Length of Crest when Discharge and Velocity is not considered, measured in Length cannot be negative.

Which unit is used to measure Length of Crest when Discharge and Velocity is not considered?

Length of Crest when Discharge and Velocity is not considered is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Length of Crest when Discharge and Velocity is not considered can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit