FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Leg of Weld given Maximum Shear Stress-induced in Plane Formula

GoLeg of Weld given Shear Stress-induced in Plane Formula

GoLeg of Weld given Allowable Lod per mm Length of Transverse Fillet Weld Formula

Fx Copy

LaTeX Copy

The Leg of Weld is the distance from the joint root to the toe of the weld. Check FAQs

h l = 1.21 \cdot \frac{P a}{𝜏 max}

h_l - Leg of Weld?P_a - Load per Unit Length in Transverse Fillet Weld?𝜏_max - Maximum Shear Stress in Transverse Fillet Weld?

Leg of Weld given Maximum Shear Stress-induced in Plane Example

With values

With units

Only example

Here is how the Leg of Weld given Maximum Shear Stress-induced in Plane equation looks like with Values.

Here is how the Leg of Weld given Maximum Shear Stress-induced in Plane equation looks like with Units.

Here is how the Leg of Weld given Maximum Shear Stress-induced in Plane equation looks like.

21.1061 = 1.21 \cdot \frac{1378}{79}

21.1061mm = 1.21 \cdot \frac{1378N/mm}{79N/mm²}

21.1061 = 1.21 \cdot \frac{1378}{79}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Design of Machine Elements » fx Leg of Weld given Maximum Shear Stress-induced in Plane

Leg of Weld given Maximum Shear Stress-induced in Plane Solution

Follow our step by step solution on how to calculate Leg of Weld given Maximum Shear Stress-induced in Plane?

FIRST Step Consider the formula

h l = 1.21 \cdot \frac{P a}{𝜏 max}

Next Step Substitute values of Variables

∴

h l = 1.21 \cdot \frac{1378N/mm}{79N/mm²}

Next Step Convert Units

∴

h l = 1.21 \cdot \frac{1.4E+6N/m}{7.9E+7Pa}

Next Step Prepare to Evaluate

∴

h l = 1.21 \cdot \frac{1.4E+6}{7.9E+7}

Next Step Evaluate

∴

h l = 0.0211060759493671m

Next Step Convert to Output's Unit

∴

h l = 21.1060759493671mm

LAST Step Rounding Answer

∴

h l = 21.1061mm

Leg of Weld given Maximum Shear Stress-induced in Plane Formula Elements

Variables

Leg of Weld

The Leg of Weld is the distance from the joint root to the toe of the weld.

Symbol: h_l

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Leg of Weld

Load per Unit Length in Transverse Fillet Weld

Load per unit length in transverse fillet weld is the load-bearing capacity of the double transverse fillet weld per unit length of the weld.

Symbol: P_a

Measurement: Surface TensionUnit: N/mm

Note: Value should be greater than 0.

Formulas to find Load per Unit Length in Transverse Fillet Weld

Maximum Shear Stress in Transverse Fillet Weld

Maximum shear stress in transverse fillet weld is the maximum force per unit area that acts coplanar with a cross-section of the weld material arises due to shear forces.

Symbol: 𝜏_max

Measurement: StressUnit: N/mm²

Note: Value should be greater than 0.

Formulas to find Maximum Shear Stress in Transverse Fillet Weld

Other Formulas to find Leg of Weld

Go Leg of Weld given Shear Stress-induced in Plane

h l = P d \cdot \sin (θ) \cdot \frac{\sin (θ) + \cos (θ)}{𝜏 \cdot L}

Go Leg of Weld given Allowable Lod per mm Length of Transverse Fillet Weld

h l = \frac{P a}{0.8284 \cdot 𝜏 max}

Other formulas in Transverse Fillet Weld category

Go Permissible Tensile Strength for Double Transverse Fillet Joint

σ t = \frac{P}{1.414 \cdot L \cdot L}

Go Tensile Stress in Transverse Fillet Weld

σ t = \frac{P t}{0.707 \cdot h l \cdot L}

Go Tensile Force on Plates given Tensile Stress in Transverse Fillet Weld

P t = σ t \cdot 0.707 \cdot h l \cdot L

Go Thickness of Plate given Tensile Stress in Transverse Fillet Weld

t = \frac{P t}{L \cdot σ t}

How to Evaluate Leg of Weld given Maximum Shear Stress-induced in Plane?

Leg of Weld given Maximum Shear Stress-induced in Plane evaluator uses Leg of Weld = 1.21*Load per Unit Length in Transverse Fillet Weld/(Maximum Shear Stress in Transverse Fillet Weld) to evaluate the Leg of Weld, The Leg of Weld given Maximum Shear Stress-induced in Plane formula is defined as the distance from the joint root to the toe of the weld. Leg of Weld is denoted by h_l symbol.

How to evaluate Leg of Weld given Maximum Shear Stress-induced in Plane using this online evaluator? To use this online evaluator for Leg of Weld given Maximum Shear Stress-induced in Plane, enter Load per Unit Length in Transverse Fillet Weld (P_a) & Maximum Shear Stress in Transverse Fillet Weld (𝜏_max) and hit the calculate button.

FAQs on Leg of Weld given Maximum Shear Stress-induced in Plane

What is the formula to find Leg of Weld given Maximum Shear Stress-induced in Plane?

The formula of Leg of Weld given Maximum Shear Stress-induced in Plane is expressed as Leg of Weld = 1.21*Load per Unit Length in Transverse Fillet Weld/(Maximum Shear Stress in Transverse Fillet Weld). Here is an example- 21106.08 = 1.21*1378000/(79000000).

How to calculate Leg of Weld given Maximum Shear Stress-induced in Plane?

With Load per Unit Length in Transverse Fillet Weld (P_a) & Maximum Shear Stress in Transverse Fillet Weld (𝜏_max) we can find Leg of Weld given Maximum Shear Stress-induced in Plane using the formula - Leg of Weld = 1.21*Load per Unit Length in Transverse Fillet Weld/(Maximum Shear Stress in Transverse Fillet Weld).

What are the other ways to Calculate Leg of Weld?

Here are the different ways to Calculate Leg of Weld-

Leg of Weld=Load on Double Transverse Fillet Weld*sin(Weld Cut Angle)*(sin(Weld Cut Angle)+cos(Weld Cut Angle))/(Shear Stress in Transverse Fillet Weld*Length of Weld)
Leg of Weld=Load per Unit Length in Transverse Fillet Weld/(0.8284*Maximum Shear Stress in Transverse Fillet Weld)

Can the Leg of Weld given Maximum Shear Stress-induced in Plane be negative?

No, the Leg of Weld given Maximum Shear Stress-induced in Plane, measured in Length cannot be negative.

Which unit is used to measure Leg of Weld given Maximum Shear Stress-induced in Plane?

Leg of Weld given Maximum Shear Stress-induced in Plane is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Leg of Weld given Maximum Shear Stress-induced in Plane can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Leg of Weld given Maximum Shear Stress-induced in Plane Formula

​GoLeg of Weld given Shear Stress-induced in Plane Formula

​GoLeg of Weld given Allowable Lod per mm Length of Transverse Fillet Weld Formula

Leg of Weld given Maximum Shear Stress-induced in Plane Example

Leg of Weld given Maximum Shear Stress-induced in Plane Solution

Leg of Weld given Maximum Shear Stress-induced in Plane Formula Elements

Other Formulas to find Leg of Weld

Other formulas in Transverse Fillet Weld category

How to Evaluate Leg of Weld given Maximum Shear Stress-induced in Plane?

FAQs on Leg of Weld given Maximum Shear Stress-induced in Plane

Variable Name

GoLeg of Weld given Shear Stress-induced in Plane Formula

GoLeg of Weld given Allowable Lod per mm Length of Transverse Fillet Weld Formula