Fx Copy
LaTeX Copy
Conduction shape factor is defined as the value used to determine the heat transfer rate for the configurations which are very complex and require high calculation time. Check FAQs
S=At
S - Conduction Shape Factor?A - Cross-Sectional Area?t - Thickness?

Large Plane Wall Example

With values
With units
Only example

Here is how the Large Plane Wall equation looks like with Values.

Here is how the Large Plane Wall equation looks like with Units.

Here is how the Large Plane Wall equation looks like.

28Edit=105Edit3.75Edit
You are here -
HomeIcon Home » Category Physics » Category Mechanical » Category Heat and Mass Transfer » fx Large Plane Wall

Large Plane Wall Solution

Follow our step by step solution on how to calculate Large Plane Wall?

FIRST Step Consider the formula
S=At
Next Step Substitute values of Variables
S=1053.75m
Next Step Prepare to Evaluate
S=1053.75
LAST Step Evaluate
S=28m

Large Plane Wall Formula Elements

Variables
Conduction Shape Factor
Conduction shape factor is defined as the value used to determine the heat transfer rate for the configurations which are very complex and require high calculation time.
Symbol: S
Measurement: LengthUnit: m
Note: Value should be greater than 0.
Cross-Sectional Area
The Cross-Sectional Area which is perpendicular to the path of heat flow.
Symbol: A
Measurement: AreaUnit:
Note: Value should be greater than 0.
Thickness
The thickness of the body or sample is the distance measured on a path parallel to the heat flow.
Symbol: t
Measurement: LengthUnit: m
Note: Value should be greater than 0.

Other Formulas to find Conduction Shape Factor

​Go Isothermal Cylinder at Center of Square Solid Bar of Same Length
S=2πLcln(1.08wD)
​Go Eccentric Isothermal Cylinder in Cylinder of Same Length
S=2πLcacosh(D12+D22-4z22D1D2)
​Go Long Hollow Cylindrical Layer
S=2πLcln(r2r1)
​Go Hollow Spherical Layer
S=4πriroro-ri

How to Evaluate Large Plane Wall?

Large Plane Wall evaluator uses Conduction Shape Factor = Cross-Sectional Area/Thickness to evaluate the Conduction Shape Factor, Large Plane Wall formula is defined as a measure of the surface area of a large plane wall, which is a critical parameter in various engineering and architectural applications, providing valuable insights into the design and construction of buildings and structures. Conduction Shape Factor is denoted by S symbol.

How to evaluate Large Plane Wall using this online evaluator? To use this online evaluator for Large Plane Wall, enter Cross-Sectional Area (A) & Thickness (t) and hit the calculate button.

FAQs on Large Plane Wall

What is the formula to find Large Plane Wall?
The formula of Large Plane Wall is expressed as Conduction Shape Factor = Cross-Sectional Area/Thickness. Here is an example- 1.166667 = 105/3.75.
How to calculate Large Plane Wall?
With Cross-Sectional Area (A) & Thickness (t) we can find Large Plane Wall using the formula - Conduction Shape Factor = Cross-Sectional Area/Thickness.
What are the other ways to Calculate Conduction Shape Factor?
Here are the different ways to Calculate Conduction Shape Factor-
  • Conduction Shape Factor=(2*pi*Length of Cylinder)/ln((1.08*Width of Square Bar)/Diameter of Cylinder)OpenImg
  • Conduction Shape Factor=(2*pi*Length of Cylinder)/acosh((Diameter of Cylinder 1^2+Diameter of Cylinder 2^2-4*Eccentric Distance Between Objects^2)/(2*Diameter of Cylinder 1*Diameter of Cylinder 2))OpenImg
  • Conduction Shape Factor=(2*pi*Length of Cylinder)/(ln(Outer Radius of Cylinder/Inner Radius of Cylinder))OpenImg
Can the Large Plane Wall be negative?
No, the Large Plane Wall, measured in Length cannot be negative.
Which unit is used to measure Large Plane Wall?
Large Plane Wall is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Large Plane Wall can be measured.
Copied!