FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Inter-Isochrone Area given Inflow Formula

Fx Copy

LaTeX Copy

Inter-Isochrone Area divides area of watershed into subareas with distinct runoff translation times. Check FAQs

A r = I \cdot \frac{Δt}{2.78}

A_r - Inter-Isochrone Area?I - Inflow Rate?Δt - Time Interval?

Inter-Isochrone Area given Inflow Example

With values

With units

Only example

Here is how the Inter-Isochrone Area given Inflow equation looks like with Values.

Here is how the Inter-Isochrone Area given Inflow equation looks like with Units.

Here is how the Inter-Isochrone Area given Inflow equation looks like.

50.3597 = 28 \cdot \frac{5}{2.78}

50.3597m² = 28m³/s \cdot \frac{5s}{2.78}

50.3597 = 28 \cdot \frac{5}{2.78}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Engineering Hydrology » fx Inter-Isochrone Area given Inflow

Inter-Isochrone Area given Inflow Solution

Follow our step by step solution on how to calculate Inter-Isochrone Area given Inflow?

FIRST Step Consider the formula

A r = I \cdot \frac{Δt}{2.78}

Next Step Substitute values of Variables

∴

A r = 28m³/s \cdot \frac{5s}{2.78}

Next Step Prepare to Evaluate

∴

A r = 28 \cdot \frac{5}{2.78}

Next Step Evaluate

∴

A r = 50.3597122302158m²

LAST Step Rounding Answer

∴

A r = 50.3597m²

Inter-Isochrone Area given Inflow Formula Elements

Variables

Inter-Isochrone Area

Inter-Isochrone Area divides area of watershed into subareas with distinct runoff translation times.

Symbol: A_r

Measurement: AreaUnit: m²

Note: Value can be positive or negative.

Formulas to find Inter-Isochrone Area

Inflow Rate

Inflow Rate for a given catchment area is the average volume of incoming water in unit time at any interval of time of the day.

Symbol: I

Measurement: Volumetric Flow RateUnit: m³/s

Note: Value should be greater than 0.

Formulas to find Inflow Rate

Time Interval

Time Interval is the amount of time required for the change from the initial to the final state.

Symbol: Δt

Measurement: TimeUnit: s

Note: Value should be greater than 0.

Formulas to find Time Interval

Other formulas in Clark's Method for IUH category

Go Inflow Rate between Inter-Isochrone Area

I = 2.78 \cdot \frac{A r}{Δt}

Go Time Interval at Inter-Isochrone Area given Inflow

Δt = 2.78 \cdot \frac{A r}{I}

Go Outflow at End of Time Interval for Routing of Time-Area Histogram

Q 2 = 2 \cdot C 1 \cdot I 1 + C 2 \cdot Q 1

Go Outflow at Beginning of Time Interval for Routing of Time-Area Histogram

Q 1 = \frac{Q 2 - (2 \cdot C 1 \cdot I 1)}{C 2}

How to Evaluate Inter-Isochrone Area given Inflow?

Inter-Isochrone Area given Inflow evaluator uses Inter-Isochrone Area = Inflow Rate*Time Interval/2.78 to evaluate the Inter-Isochrone Area, The Inter-Isochrone Area given Inflow formula is defined as the time taken for runoff water within the drainage basin to reach the lake, reservoir or outlet, assuming constant and uniform effective rainfall. Inter-Isochrone Area is denoted by A_r symbol.

How to evaluate Inter-Isochrone Area given Inflow using this online evaluator? To use this online evaluator for Inter-Isochrone Area given Inflow, enter Inflow Rate (I) & Time Interval (Δt) and hit the calculate button.

FAQs on Inter-Isochrone Area given Inflow

What is the formula to find Inter-Isochrone Area given Inflow?

The formula of Inter-Isochrone Area given Inflow is expressed as Inter-Isochrone Area = Inflow Rate*Time Interval/2.78. Here is an example- 50.35971 = 28*5/2.78.

How to calculate Inter-Isochrone Area given Inflow?

With Inflow Rate (I) & Time Interval (Δt) we can find Inter-Isochrone Area given Inflow using the formula - Inter-Isochrone Area = Inflow Rate*Time Interval/2.78.

Can the Inter-Isochrone Area given Inflow be negative?

Yes, the Inter-Isochrone Area given Inflow, measured in Area can be negative.

Which unit is used to measure Inter-Isochrone Area given Inflow?

Inter-Isochrone Area given Inflow is usually measured using the Square Meter[m²] for Area. Square Kilometer[m²], Square Centimeter[m²], Square Millimeter[m²] are the few other units in which Inter-Isochrone Area given Inflow can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit