FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Instantaneous Phase Voltage of Cyclo Converter Formula

Fx Copy

LaTeX Copy

Instantaneous Voltage of a cycloconverter is the voltage that is generated at a particular instant in time. It is determined by the switching pattern of the converters. Check FAQs

V i = \sqrt{2} \cdot V ph \cdot \cos (ω \cdot t)

V_i - Instantaneous Voltage?V_ph - Phase Voltage?ω - Angular Frequency?t - Time period?

Instantaneous Phase Voltage of Cyclo Converter Example

With values

With units

Only example

Here is how the Instantaneous Phase Voltage of Cyclo Converter equation looks like with Values.

Here is how the Instantaneous Phase Voltage of Cyclo Converter equation looks like with Units.

Here is how the Instantaneous Phase Voltage of Cyclo Converter equation looks like.

6.9435 = \sqrt{2} \cdot 5.65 \cdot \cos (133.1 \cdot 5)

6.9435V = \sqrt{2} \cdot 5.65V \cdot \cos (133.1rad/s \cdot 5s)

6.9435 = \sqrt{2} \cdot 5.65 \cdot \cos (133.1 \cdot 5)

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Electrical » Category

Power Electronics » fx Instantaneous Phase Voltage of Cyclo Converter

Instantaneous Phase Voltage of Cyclo Converter Solution

Follow our step by step solution on how to calculate Instantaneous Phase Voltage of Cyclo Converter?

FIRST Step Consider the formula

V i = \sqrt{2} \cdot V ph \cdot \cos (ω \cdot t)

Next Step Substitute values of Variables

∴

V i = \sqrt{2} \cdot 5.65V \cdot \cos (133.1rad/s \cdot 5s)

Next Step Prepare to Evaluate

∴

V i = \sqrt{2} \cdot 5.65 \cdot \cos (133.1 \cdot 5)

Next Step Evaluate

∴

V i = 6.94348162810538V

LAST Step Rounding Answer

∴

V i = 6.9435V

Instantaneous Phase Voltage of Cyclo Converter Formula Elements

Variables

Functions

Instantaneous Voltage

Instantaneous Voltage of a cycloconverter is the voltage that is generated at a particular instant in time. It is determined by the switching pattern of the converters.

Symbol: V_i

Measurement: Electric PotentialUnit: V

Note: Value should be greater than 0.

Formulas to find Instantaneous Voltage

Phase Voltage

Phase Voltage of a cycloconverter is the voltage between any two of the three output terminals of a three-phase cycloconverter.

Symbol: V_ph

Measurement: Electric PotentialUnit: V

Note: Value should be greater than 0.

Formulas to find Phase Voltage

Angular Frequency

Angular Frequency of a cycloconverter is determined by the firing angles of the thyristors.

Symbol: ω

Measurement: Angular FrequencyUnit: rad/s

Note: Value should be greater than 0.

Formulas to find Angular Frequency

Time period

Time period is the time it takes for one complete cycle of the output voltage waveform.

Symbol: t

Measurement: TimeUnit: s

Note: Value should be greater than 0.

Formulas to find Time period

cos

Cosine of an angle is the ratio of the side adjacent to the angle to the hypotenuse of the triangle.

Syntax: cos(Angle)

sqrt

A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number.

Syntax: sqrt(Number)

Other formulas in Cyclo Converters category

Go RMS Value of Output Voltage of Cyclo Converter

V out = \frac{V max}{\sqrt{2}} \cdot {(\frac{1}{π} \cdot (π - α + \frac{\sin (2 \cdot α)}{2}))}^{\frac{1}{2}}

Go Fundamental Output Phase Voltage of Cyclo Converter

V out = V ph \cdot (\frac{t 1}{π}) \cdot \sin (\frac{π}{t 1})

Go Output Frequency in Cyclo Converter

f out = \frac{1}{4} \cdot f s

Go Maximum Output DC Voltage in Cyclo Converter

V max = V r \cdot V out

How to Evaluate Instantaneous Phase Voltage of Cyclo Converter?

Instantaneous Phase Voltage of Cyclo Converter evaluator uses Instantaneous Voltage = sqrt(2)*Phase Voltage*cos(Angular Frequency*Time period) to evaluate the Instantaneous Voltage, Instantaneous Phase Voltage of Cyclo Converter is the voltage between any two of the three output terminals of a three-phase cycloconverter at a specific point in time. It is important to note that the instantaneous phase voltage is constantly changing with time. This is because the output voltage of a cycloconverter is controlled by the firing angles of the thyristors, and the firing angles of the thyristors constantly change with time. The instantaneous phase voltage is a complex waveform that contains both fundamental and harmonic components. The fundamental component is the part of the waveform that has the same frequency as the input voltage. The harmonic components are the part of the waveform that have frequencies that are multiples of the input frequency. Instantaneous Voltage is denoted by V_i symbol.

How to evaluate Instantaneous Phase Voltage of Cyclo Converter using this online evaluator? To use this online evaluator for Instantaneous Phase Voltage of Cyclo Converter, enter Phase Voltage (V_ph), Angular Frequency (ω) & Time period (t) and hit the calculate button.

FAQs on Instantaneous Phase Voltage of Cyclo Converter

What is the formula to find Instantaneous Phase Voltage of Cyclo Converter?

The formula of Instantaneous Phase Voltage of Cyclo Converter is expressed as Instantaneous Voltage = sqrt(2)*Phase Voltage*cos(Angular Frequency*Time period). Here is an example- 6.943482 = sqrt(2)*5.65*cos(133.1*5).

How to calculate Instantaneous Phase Voltage of Cyclo Converter?

With Phase Voltage (V_ph), Angular Frequency (ω) & Time period (t) we can find Instantaneous Phase Voltage of Cyclo Converter using the formula - Instantaneous Voltage = sqrt(2)*Phase Voltage*cos(Angular Frequency*Time period). This formula also uses Cosine (cos), Square Root (sqrt) function(s).

Can the Instantaneous Phase Voltage of Cyclo Converter be negative?

No, the Instantaneous Phase Voltage of Cyclo Converter, measured in Electric Potential cannot be negative.

Which unit is used to measure Instantaneous Phase Voltage of Cyclo Converter?

Instantaneous Phase Voltage of Cyclo Converter is usually measured using the Volt[V] for Electric Potential. Millivolt[V], Microvolt[V], Nanovolt[V] are the few other units in which Instantaneous Phase Voltage of Cyclo Converter can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Instantaneous Phase Voltage of Cyclo Converter Formula

Instantaneous Phase Voltage of Cyclo Converter Example

Instantaneous Phase Voltage of Cyclo Converter Solution

Instantaneous Phase Voltage of Cyclo Converter Formula Elements

Other formulas in Cyclo Converters category

How to Evaluate Instantaneous Phase Voltage of Cyclo Converter?

FAQs on Instantaneous Phase Voltage of Cyclo Converter

Variable Name