FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Input Power of Single Phase Full Converter Drives Formula

Fx Copy

LaTeX Copy

Input Power of single-phase full converter drive is an electronic control system used to regulate the speed and direction of single-phase alternating current (AC) motors. Check FAQs

P in = (\frac{2 \cdot \sqrt{2}}{π}) \cdot \cos (α)

P_in - Input Power?α - Delay Angle of Thyristor?π - Archimedes' constant?

Input Power of Single Phase Full Converter Drives Example

With values

With units

Only example

Here is how the Input Power of Single Phase Full Converter Drives equation looks like with Values.

Here is how the Input Power of Single Phase Full Converter Drives equation looks like with Units.

Here is how the Input Power of Single Phase Full Converter Drives equation looks like.

0.3079 = (\frac{2 \cdot \sqrt{2}}{3.1416}) \cdot \cos (70)

0.3079W = (\frac{2 \cdot \sqrt{2}}{3.1416}) \cdot \cos (70°)

0.3079 = (\frac{2 \cdot \sqrt{2}}{3.1416}) \cdot \cos (70)

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Electrical » Category

Power Electronics » fx Input Power of Single Phase Full Converter Drives

Input Power of Single Phase Full Converter Drives Solution

Follow our step by step solution on how to calculate Input Power of Single Phase Full Converter Drives?

FIRST Step Consider the formula

P in = (\frac{2 \cdot \sqrt{2}}{π}) \cdot \cos (α)

Next Step Substitute values of Variables

∴

P in = (\frac{2 \cdot \sqrt{2}}{π}) \cdot \cos (70°)

Next Step Substitute values of Constants

∴

P in = (\frac{2 \cdot \sqrt{2}}{3.1416}) \cdot \cos (70°)

Next Step Convert Units

∴

P in = (\frac{2 \cdot \sqrt{2}}{3.1416}) \cdot \cos (1.2217rad)

Next Step Prepare to Evaluate

∴

P in = (\frac{2 \cdot \sqrt{2}}{3.1416}) \cdot \cos (1.2217)

Next Step Evaluate

∴

P in = 0.307926315490687W

LAST Step Rounding Answer

∴

P in = 0.3079W

Input Power of Single Phase Full Converter Drives Formula Elements

Variables

Constants

Functions

Input Power

Input Power of single-phase full converter drive is an electronic control system used to regulate the speed and direction of single-phase alternating current (AC) motors.

Symbol: P_in

Measurement: PowerUnit: W

Note: Value should be greater than 0.

Formulas to find Input Power

Delay Angle of Thyristor

Delay Angle of Thyristor is the angle at which thyristors are triggered after zero crossing.

Symbol: α

Measurement: AngleUnit: °

Note: Value can be positive or negative.

Formulas to find Delay Angle of Thyristor

Archimedes' constant

Archimedes' constant is a mathematical constant that represents the ratio of the circumference of a circle to its diameter.

Symbol: π

Value: 3.14159265358979323846264338327950288

cos

Cosine of an angle is the ratio of the side adjacent to the angle to the hypotenuse of the triangle.

Syntax: cos(Angle)

sqrt

A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number.

Syntax: sqrt(Number)

Other formulas in Single Phase Drives category

Go Average Armature Voltage of Single Phase Half-Wave Converter Drive

V a(half) = \frac{V m}{2 \cdot π} \cdot (1 + \cos (α))

Go Average Field Voltage of Single Phase Semi-Converter Drives

V f(semi) = (\frac{V m}{π}) \cdot (1 + \cos (α))

Go Average Armature Voltage of Single Phase Full-Converter Drives

V a(full) = \frac{2 \cdot V m \cdot \cos (α)}{π}

Go RMS Value of Thyristor Current in Half Wave Converter Drives

I sr = I a \cdot {(\frac{π - α}{2 \cdot π})}^{\frac{1}{2}}

How to Evaluate Input Power of Single Phase Full Converter Drives?

Input Power of Single Phase Full Converter Drives evaluator uses Input Power = ((2*sqrt(2))/pi)*cos(Delay Angle of Thyristor) to evaluate the Input Power, Input Power of Single Phase Full Converter Drives is an electronic control system used to regulate the speed and direction of single-phase alternating current (AC) motors. It typically consists of a power electronic converter that converts AC power to direct current (DC), and then an inverter that converts the DC back to AC with variable voltage and frequency, allowing for precise control of the motor. Input Power is denoted by P_in symbol.

How to evaluate Input Power of Single Phase Full Converter Drives using this online evaluator? To use this online evaluator for Input Power of Single Phase Full Converter Drives, enter Delay Angle of Thyristor (α) and hit the calculate button.

FAQs on Input Power of Single Phase Full Converter Drives

What is the formula to find Input Power of Single Phase Full Converter Drives?

The formula of Input Power of Single Phase Full Converter Drives is expressed as Input Power = ((2*sqrt(2))/pi)*cos(Delay Angle of Thyristor). Here is an example- 0.307926 = ((2*sqrt(2))/pi)*cos(1.2217304763958).

How to calculate Input Power of Single Phase Full Converter Drives?

With Delay Angle of Thyristor (α) we can find Input Power of Single Phase Full Converter Drives using the formula - Input Power = ((2*sqrt(2))/pi)*cos(Delay Angle of Thyristor). This formula also uses Archimedes' constant and , Cosine (cos), Square Root (sqrt) function(s).

Can the Input Power of Single Phase Full Converter Drives be negative?

No, the Input Power of Single Phase Full Converter Drives, measured in Power cannot be negative.

Which unit is used to measure Input Power of Single Phase Full Converter Drives?

Input Power of Single Phase Full Converter Drives is usually measured using the Watt[W] for Power. Kilowatt[W], Milliwatt[W], Microwatt[W] are the few other units in which Input Power of Single Phase Full Converter Drives can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit