Inner Surface Temperature 3 Layer Wall
Inner Surface Temperature 3 layer wall is the temperature at the inner surface of the wall (either plane wall or cylindrical wall or spherical wall, etc).
Symbol: Ti3
Measurement: TemperatureUnit: K
Note: Value can be positive or negative.
Outer Surface Temperature 3 Layer
Outer Surface Temperature 3 layer is the temperature at the outer surface of the wall either plane wall or cylindrical wall or spherical wall, etc.
Symbol: To3
Measurement: TemperatureUnit: K
Note: Value can be positive or negative.
Heat Flow Rate 3 Layer
Heat Flow Rate 3 Layer is the amount of heat that is transferred per unit of time in some material, usually measured in watt. Heat is the flow of thermal energy driven by thermal non-equilibrium.
Symbol: Ql3
Measurement: PowerUnit: W
Note: Value can be positive or negative.
Length 1
Length 1 is the length of the first body.
Symbol: L1
Measurement: LengthUnit: m
Note: Value should be greater than 0.
Thermal Conductivity 1
Thermal Conductivity 1 is the thermal conductivity of the first body.
Symbol: k1
Measurement: Thermal ConductivityUnit: W/(m*K)
Note: Value should be greater than 0.
Area of 3 Layer Wall
Area of 3 Layer Wall refers to the surface area of the wall, which is the total amount of space that it occupies. It is typically measured in square units such as square feet or square meters.
Symbol: Aw3
Measurement: AreaUnit: m²
Note: Value should be greater than 0.
Length 2
Length 2 is the length of the second body/object/section.
Symbol: L2
Measurement: LengthUnit: m
Note: Value should be greater than 0.
Thermal Conductivity 2
Thermal Conductivity 2 is the thermal conductivity of the second body.
Symbol: k2
Measurement: Thermal ConductivityUnit: W/(m*K)
Note: Value should be greater than 0.
Length 3
Length 3 is the length of the third body/object/section.
Symbol: L3
Measurement: LengthUnit: m
Note: Value should be greater than 0.
Thermal Conductivity 3
Thermal Conductivity 3 is the thermal conductivity of the third body.
Symbol: k3
Measurement: Thermal ConductivityUnit: W/(m*K)
Note: Value should be greater than 0.