FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Initial Nip in Leaf Spring Formula

Fx Copy

LaTeX Copy

Nip in Leaf Spring is defined as the initial gap between the extra full-length leaf and the graduated-length leaf before the assembly. Check FAQs

C = 2 \cdot P \cdot \frac{L^{3}}{E \cdot n \cdot b \cdot t^{3}}

C - Nip in Leaf Spring?P - Force Applied at End of Leaf Spring?L - Length of Cantilever of Leaf Spring?E - Modulus of Elasticity of Spring?n - Total Number of Leaves?b - Width of Leaf?t - Thickness of Leaf?

Initial Nip in Leaf Spring Example

With values

With units

Only example

Here is how the Initial Nip in Leaf Spring equation looks like with Values.

Here is how the Initial Nip in Leaf Spring equation looks like with Units.

Here is how the Initial Nip in Leaf Spring equation looks like.

13.4822 = 2 \cdot 37500 \cdot \frac{500^{3}}{207000 \cdot 18 \cdot 108 \cdot 12^{3}}

13.4822mm = 2 \cdot 37500N \cdot \frac{{500mm}^{3}}{207000N/mm² \cdot 18 \cdot 108mm \cdot {12mm}^{3}}

13.4822 = 2 \cdot 37500 \cdot \frac{500^{3}}{207000 \cdot 18 \cdot 108 \cdot 12^{3}}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Design of Automobile Elements » fx Initial Nip in Leaf Spring

Initial Nip in Leaf Spring Solution

Follow our step by step solution on how to calculate Initial Nip in Leaf Spring?

FIRST Step Consider the formula

C = 2 \cdot P \cdot \frac{L^{3}}{E \cdot n \cdot b \cdot t^{3}}

Next Step Substitute values of Variables

∴

C = 2 \cdot 37500N \cdot \frac{{500mm}^{3}}{207000N/mm² \cdot 18 \cdot 108mm \cdot {12mm}^{3}}

Next Step Convert Units

∴

C = 2 \cdot 37500N \cdot \frac{{0.5m}^{3}}{2.1E+11Pa \cdot 18 \cdot 0.108m \cdot {0.012m}^{3}}

Next Step Prepare to Evaluate

∴

C = 2 \cdot 37500 \cdot \frac{{0.5}^{3}}{2.1E+11 \cdot 18 \cdot 0.108 \cdot {0.012}^{3}}

Next Step Evaluate

∴

C = 0.0134822051803697m

Next Step Convert to Output's Unit

∴

C = 13.4822051803697mm

LAST Step Rounding Answer

∴

C = 13.4822mm

Initial Nip in Leaf Spring Formula Elements

Variables

Nip in Leaf Spring

Nip in Leaf Spring is defined as the initial gap between the extra full-length leaf and the graduated-length leaf before the assembly.

Symbol: C

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Nip in Leaf Spring

Force Applied at End of Leaf Spring

Force Applied at End of Leaf Spring is defined as the net amount of force that is acting onto the spring.

Symbol: P

Measurement: ForceUnit: N

Note: Value should be greater than 0.

Formulas to find Force Applied at End of Leaf Spring

Length of Cantilever of Leaf Spring

The Length of Cantilever of Leaf Spring is defined as half the length of a semi-elliptic spring.

Symbol: L

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Length of Cantilever of Leaf Spring

Modulus of Elasticity of Spring

Modulus of Elasticity of Spring is a quantity that measures the spring's wire resistance to being deformed elastically when a stress is applied to it.

Symbol: E

Measurement: PressureUnit: N/mm²

Note: Value should be greater than 0.

Formulas to find Modulus of Elasticity of Spring

Total Number of Leaves

Total Number of Leaves is defined as the sum of graduated length leaves and extra full length leaves.

Symbol: n

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Total Number of Leaves

Width of Leaf

Width of Leaf is defined as the width of each leaf present in a multi-leaf spring.

Symbol: b

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Width of Leaf

Thickness of Leaf

Thickness of Leaf is defined as the thickness of each leaf present in a multi-leaf spring.

Symbol: t

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Thickness of Leaf

Other formulas in Nipping of Leaf Spring category

Go Force Applied at End of Spring

P = C \cdot \frac{E \cdot n \cdot b \cdot (t^{3})}{2 \cdot (L^{3})}

Go Length of Cantilever given Initial Nip of Leaf Spring

L = {(C \cdot \frac{E \cdot n \cdot b \cdot t^{3}}{2 \cdot P})}^{\frac{1}{3}}

How to Evaluate Initial Nip in Leaf Spring?

Initial Nip in Leaf Spring evaluator uses Nip in Leaf Spring = 2*Force Applied at End of Leaf Spring*Length of Cantilever of Leaf Spring^3/(Modulus of Elasticity of Spring*Total Number of Leaves*Width of Leaf*Thickness of Leaf^3) to evaluate the Nip in Leaf Spring, The Initial Nip in Leaf Spring formula is defined as initial gap between extra full length leaves and graduated length leaves. Nip in Leaf Spring is denoted by C symbol.

How to evaluate Initial Nip in Leaf Spring using this online evaluator? To use this online evaluator for Initial Nip in Leaf Spring, enter Force Applied at End of Leaf Spring (P), Length of Cantilever of Leaf Spring (L), Modulus of Elasticity of Spring (E), Total Number of Leaves (n), Width of Leaf (b) & Thickness of Leaf (t) and hit the calculate button.

FAQs on Initial Nip in Leaf Spring

What is the formula to find Initial Nip in Leaf Spring?

The formula of Initial Nip in Leaf Spring is expressed as Nip in Leaf Spring = 2*Force Applied at End of Leaf Spring*Length of Cantilever of Leaf Spring^3/(Modulus of Elasticity of Spring*Total Number of Leaves*Width of Leaf*Thickness of Leaf^3). Here is an example- 13482.21 = 2*37500*0.5^3/(207000000000*18*0.108*0.012^3).

How to calculate Initial Nip in Leaf Spring?

With Force Applied at End of Leaf Spring (P), Length of Cantilever of Leaf Spring (L), Modulus of Elasticity of Spring (E), Total Number of Leaves (n), Width of Leaf (b) & Thickness of Leaf (t) we can find Initial Nip in Leaf Spring using the formula - Nip in Leaf Spring = 2*Force Applied at End of Leaf Spring*Length of Cantilever of Leaf Spring^3/(Modulus of Elasticity of Spring*Total Number of Leaves*Width of Leaf*Thickness of Leaf^3).

Can the Initial Nip in Leaf Spring be negative?

No, the Initial Nip in Leaf Spring, measured in Length cannot be negative.

Which unit is used to measure Initial Nip in Leaf Spring?

Initial Nip in Leaf Spring is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Initial Nip in Leaf Spring can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Initial Nip in Leaf Spring Formula

Initial Nip in Leaf Spring Example

Initial Nip in Leaf Spring Solution

Initial Nip in Leaf Spring Formula Elements

Other formulas in Nipping of Leaf Spring category

How to Evaluate Initial Nip in Leaf Spring?

FAQs on Initial Nip in Leaf Spring

Variable Name