FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Infeed given Metal Removal Rate during Grinding Formula

Fx Copy

LaTeX Copy

Infeed Given on Workpiece refers to the controlled movement of the grinding wheel towards the workpiece to achieve a desired depth of cut or removal of material. Check FAQs

F in = \frac{Z w}{A p \cdot V w}

F_in - Infeed Given on Workpiece?Z_w - Metal Removal Rate?A_p - Width of Cut?V_w - Surface Speed of Workpiece?

Infeed given Metal Removal Rate during Grinding Example

With values

With units

Only example

Here is how the Infeed given Metal Removal Rate during Grinding equation looks like with Values.

Here is how the Infeed given Metal Removal Rate during Grinding equation looks like with Units.

Here is how the Infeed given Metal Removal Rate during Grinding equation looks like.

1.3297 = \frac{0.0038}{478 \cdot 5.9}

1.3297mm = \frac{0.0038m³/s}{478mm \cdot 5.9m/s}

1.3297 = \frac{0.0038}{478 \cdot 5.9}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Production Engineering » Category

Metal Machining » fx Infeed given Metal Removal Rate during Grinding

Infeed given Metal Removal Rate during Grinding Solution

Follow our step by step solution on how to calculate Infeed given Metal Removal Rate during Grinding?

FIRST Step Consider the formula

F in = \frac{Z w}{A p \cdot V w}

Next Step Substitute values of Variables

∴

F in = \frac{0.0038m³/s}{478mm \cdot 5.9m/s}

Next Step Convert Units

∴

F in = \frac{0.0038m³/s}{0.478m \cdot 5.9m/s}

Next Step Prepare to Evaluate

∴

F in = \frac{0.0038}{0.478 \cdot 5.9}

Next Step Evaluate

∴

F in = 0.00132969292957946m

Next Step Convert to Output's Unit

∴

F in = 1.32969292957946mm

LAST Step Rounding Answer

∴

F in = 1.3297mm

Infeed given Metal Removal Rate during Grinding Formula Elements

Variables

Infeed Given on Workpiece

Infeed Given on Workpiece refers to the controlled movement of the grinding wheel towards the workpiece to achieve a desired depth of cut or removal of material.

Symbol: F_in

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Infeed Given on Workpiece

Metal Removal Rate

Metal Removal Rate (MRR) is the amount of volume removed from workpiece per unit time, when performing machining operations such as grinding.

Symbol: Z_w

Measurement: Volumetric Flow RateUnit: m³/s

Note: Value should be greater than 0.

Formulas to find Metal Removal Rate

Width of Cut

Width of Cut is defined as the width of cut in the axial direction of grinding wheel, it is also known as back engagement.

Symbol: A_p

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Width of Cut

Surface Speed of Workpiece

Surface Speed of Workpiece refers to the linear velocity of a point on the workpiece's circumference relative to the grinding wheel.

Symbol: V_w

Measurement: SpeedUnit: m/s

Note: Value should be greater than 0.

Formulas to find Surface Speed of Workpiece

Other formulas in Grain category

Go Metal removal rate during Grinding

Z w = f i \cdot a p \cdot V w

Go Width of Grinding Path given Metal Removal Rate

a p = \frac{Z w}{f i \cdot V w}

Go Grain-aspect Ratio

r g = \frac{w gMax}{t gMax}

Go Number of Active Grains per Unit Area on Wheel Surface

C g = \frac{N c}{V t \cdot a p}

How to Evaluate Infeed given Metal Removal Rate during Grinding?

Infeed given Metal Removal Rate during Grinding evaluator uses Infeed Given on Workpiece = Metal Removal Rate/(Width of Cut*Surface Speed of Workpiece) to evaluate the Infeed Given on Workpiece, The Infeed given Metal Removal Rate during Grinding refers to the controlled movement of the grinding wheel towards the workpiece to achieve a desired depth of cut or removal of material. It is a crucial parameter for determining grinding time, that affects overall efficiency of performing grinding operation. Infeed Given on Workpiece is denoted by F_in symbol.

How to evaluate Infeed given Metal Removal Rate during Grinding using this online evaluator? To use this online evaluator for Infeed given Metal Removal Rate during Grinding, enter Metal Removal Rate (Z_w), Width of Cut (A_p) & Surface Speed of Workpiece (V_w) and hit the calculate button.

FAQs on Infeed given Metal Removal Rate during Grinding

What is the formula to find Infeed given Metal Removal Rate during Grinding?

The formula of Infeed given Metal Removal Rate during Grinding is expressed as Infeed Given on Workpiece = Metal Removal Rate/(Width of Cut*Surface Speed of Workpiece). Here is an example- 1329.693 = 0.00375/(0.478*5.9).

How to calculate Infeed given Metal Removal Rate during Grinding?

With Metal Removal Rate (Z_w), Width of Cut (A_p) & Surface Speed of Workpiece (V_w) we can find Infeed given Metal Removal Rate during Grinding using the formula - Infeed Given on Workpiece = Metal Removal Rate/(Width of Cut*Surface Speed of Workpiece).

Can the Infeed given Metal Removal Rate during Grinding be negative?

No, the Infeed given Metal Removal Rate during Grinding, measured in Length cannot be negative.

Which unit is used to measure Infeed given Metal Removal Rate during Grinding?

Infeed given Metal Removal Rate during Grinding is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Infeed given Metal Removal Rate during Grinding can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Infeed given Metal Removal Rate during Grinding Formula

Infeed given Metal Removal Rate during Grinding Example

Infeed given Metal Removal Rate during Grinding Solution

Infeed given Metal Removal Rate during Grinding Formula Elements

Other formulas in Grain category

How to Evaluate Infeed given Metal Removal Rate during Grinding?

FAQs on Infeed given Metal Removal Rate during Grinding

Variable Name