FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Incident Voltage using Impedance-1 (Line PL) Formula

GoIncident Voltage using Transmitted Voltage (Line PL) Formula

GoIncident Voltage using Transmitted Coefficient of Current-3 (Line PL) Formula

Fx Copy

LaTeX Copy

The Incident Voltage on the transmission line is equal to half the generator voltage. Check FAQs

V i = I i \cdot Z 1

V_i - Incident Voltage?I_i - Incident Current?Z₁ - Impedance of Primary Winding?

Incident Voltage using Impedance-1 (Line PL) Example

With values

With units

Only example

Here is how the Incident Voltage using Impedance-1 (Line PL) equation looks like with Values.

Here is how the Incident Voltage using Impedance-1 (Line PL) equation looks like with Units.

Here is how the Incident Voltage using Impedance-1 (Line PL) equation looks like.

216 = 12 \cdot 18

216V = 12A \cdot 18Ω

216 = 12 \cdot 18

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Electrical » Category

Power System » fx Incident Voltage using Impedance-1 (Line PL)

Incident Voltage using Impedance-1 (Line PL) Solution

Follow our step by step solution on how to calculate Incident Voltage using Impedance-1 (Line PL)?

FIRST Step Consider the formula

V i = I i \cdot Z 1

Next Step Substitute values of Variables

∴

V i = 12A \cdot 18Ω

Next Step Prepare to Evaluate

∴

V i = 12 \cdot 18

LAST Step Evaluate

∴

V i = 216V

Incident Voltage using Impedance-1 (Line PL) Formula Elements

Variables

Incident Voltage

The Incident Voltage on the transmission line is equal to half the generator voltage.

Symbol: V_i

Measurement: Electric PotentialUnit: V

Note: Value can be positive or negative.

Formulas to find Incident Voltage

Incident Current

Incident Current is the Current wave that is traveling from the sending end to the receiving end of the Transmission line during any transient condition.

Symbol: I_i

Measurement: Electric CurrentUnit: A

Note: Value can be positive or negative.

Formulas to find Incident Current

Impedance of Primary Winding

The Impedance of Primary Winding is the total of primary Resistance and Reactance.

Symbol: Z₁

Measurement: Electric ResistanceUnit: Ω

Note: Value should be greater than 0.

Formulas to find Impedance of Primary Winding

Other Formulas to find Incident Voltage

Go Incident Voltage using Transmitted Voltage (Line PL)

V i = (V t \cdot \frac{Z 1}{2}) \cdot ((\frac{1}{Z 1}) + (\frac{1}{Z 2}) + (\frac{1}{Z 3}))

Go Incident Voltage using Transmitted Coefficient of Current-3 (Line PL)

V i = V t \cdot \frac{Z 1}{Z 3 \cdot τ i}

Other formulas in Line With Parallel Loads category

Go Transmitted Voltage using Transmitted Current-2 (Line PL)

V t = I t \cdot Z 2

Go Transmitted Voltage using Transmitted Current-3 (Line PL)

V t = I t \cdot Z 3

Go Reflected Current using Transmitted Current-3 and 2 (Line PL)

I r = I i - I t - I t

Go Incident Current using Transmitted Current-3 and 2 (Line PL)

I i = I r - I t - I t

How to Evaluate Incident Voltage using Impedance-1 (Line PL)?

Incident Voltage using Impedance-1 (Line PL) evaluator uses Incident Voltage = Incident Current*Impedance of Primary Winding to evaluate the Incident Voltage, The Incident Voltage using Impedance-1 (line PL) formula is defined as the voltage wave that is traveling from the sending end to the receiving end of the Transmission line. Incident Voltage is denoted by V_i symbol.

How to evaluate Incident Voltage using Impedance-1 (Line PL) using this online evaluator? To use this online evaluator for Incident Voltage using Impedance-1 (Line PL), enter Incident Current (I_i) & Impedance of Primary Winding (Z₁) and hit the calculate button.

FAQs on Incident Voltage using Impedance-1 (Line PL)

What is the formula to find Incident Voltage using Impedance-1 (Line PL)?

The formula of Incident Voltage using Impedance-1 (Line PL) is expressed as Incident Voltage = Incident Current*Impedance of Primary Winding. Here is an example- 216 = 12*18.

How to calculate Incident Voltage using Impedance-1 (Line PL)?

With Incident Current (I_i) & Impedance of Primary Winding (Z₁) we can find Incident Voltage using Impedance-1 (Line PL) using the formula - Incident Voltage = Incident Current*Impedance of Primary Winding.

What are the other ways to Calculate Incident Voltage?

Here are the different ways to Calculate Incident Voltage-

Incident Voltage=(Transmitted Voltage*Impedance of Primary Winding/2)*((1/Impedance of Primary Winding)+(1/Impedance of Secondary Winding)+(1/Impedance of Tertiary Winding))
Incident Voltage=Transmitted Voltage*Impedance of Primary Winding/(Impedance of Tertiary Winding*Transmission Coefficient of Current)

Can the Incident Voltage using Impedance-1 (Line PL) be negative?

Yes, the Incident Voltage using Impedance-1 (Line PL), measured in Electric Potential can be negative.

Which unit is used to measure Incident Voltage using Impedance-1 (Line PL)?

Incident Voltage using Impedance-1 (Line PL) is usually measured using the Volt[V] for Electric Potential. Millivolt[V], Microvolt[V], Nanovolt[V] are the few other units in which Incident Voltage using Impedance-1 (Line PL) can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit