FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Impedance using A Parameter in End Condenser Method Formula

GoImpedance(ECM) Formula

Fx Copy

LaTeX Copy

Impedance in ECM is defined as the amount of opposition faced by the direct or alternating current when it passes through a conductor component, circuit. Check FAQs

Z ecm = \frac{2 \cdot (A ecm - 1)}{Y ecm}

Z_ecm - Impedance in ECM?A_ecm - A Parameter in ECM?Y_ecm - Admittance in ECM?

Impedance using A Parameter in End Condenser Method Example

With values

With units

Only example

Here is how the Impedance using A Parameter in End Condenser Method equation looks like with Values.

Here is how the Impedance using A Parameter in End Condenser Method equation looks like with Units.

Here is how the Impedance using A Parameter in End Condenser Method equation looks like.

9.1 = \frac{2 \cdot (1.091 - 1)}{0.02}

9.1Ω = \frac{2 \cdot (1.091 - 1)}{0.02S}

9.1 = \frac{2 \cdot (1.091 - 1)}{0.02}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Electrical » Category

Power System » fx Impedance using A Parameter in End Condenser Method

Impedance using A Parameter in End Condenser Method Solution

Follow our step by step solution on how to calculate Impedance using A Parameter in End Condenser Method?

FIRST Step Consider the formula

Z ecm = \frac{2 \cdot (A ecm - 1)}{Y ecm}

Next Step Substitute values of Variables

∴

Z ecm = \frac{2 \cdot (1.091 - 1)}{0.02S}

Next Step Prepare to Evaluate

∴

Z ecm = \frac{2 \cdot (1.091 - 1)}{0.02}

LAST Step Evaluate

∴

Z ecm = 9.1Ω

Impedance using A Parameter in End Condenser Method Formula Elements

Variables

Impedance in ECM

Impedance in ECM is defined as the amount of opposition faced by the direct or alternating current when it passes through a conductor component, circuit.

Symbol: Z_ecm

Measurement: Electric ResistanceUnit: Ω

Note: Value should be greater than 0.

Formulas to find Impedance in ECM

A Parameter in ECM

A Parameter in ECM is a generalized line constant in a two port transmission line.

Symbol: A_ecm

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find A Parameter in ECM

Admittance in ECM

Admittance in ECM is the mathematical inverse of the impedance in a medium transmission line.

Symbol: Y_ecm

Measurement: Electric ConductanceUnit: S

Note: Value should be greater than 0.

Formulas to find Admittance in ECM

Other Formulas to find Impedance in ECM

Go Impedance(ECM)

Z ecm = \frac{V s(ecm) - V r(ecm)}{I s(ecm)}

Other formulas in End Condenser Method in Medium Line category

Go Sending End Current in End Condenser Method

I s(ecm) = I r(ecm) + I c(ecm)

Go Receiving End Current in End Condenser Method

I r(ecm) = I s(ecm) - I c(ecm)

Go Capacitive Current in End Condenser Method

I c(ecm) = I s(ecm) - I r(ecm)

Go Sending End Voltage in End Condenser Method

V s(ecm) = V r(ecm) + (I s(ecm) \cdot Z ecm)

How to Evaluate Impedance using A Parameter in End Condenser Method?

Impedance using A Parameter in End Condenser Method evaluator uses Impedance in ECM = (2*(A Parameter in ECM-1))/Admittance in ECM to evaluate the Impedance in ECM, The Impedance using A Parameter in End Condenser Method formula is defined as the apparent opposition in an electrical circuit to the flow of an alternating current that is analogous to the actual electrical resistance to a direct current and that is the ratio of effective electromotive force to the effective current. Impedance in ECM is denoted by Z_ecm symbol.

How to evaluate Impedance using A Parameter in End Condenser Method using this online evaluator? To use this online evaluator for Impedance using A Parameter in End Condenser Method, enter A Parameter in ECM (A_ecm) & Admittance in ECM (Y_ecm) and hit the calculate button.

FAQs on Impedance using A Parameter in End Condenser Method

What is the formula to find Impedance using A Parameter in End Condenser Method?

The formula of Impedance using A Parameter in End Condenser Method is expressed as Impedance in ECM = (2*(A Parameter in ECM-1))/Admittance in ECM. Here is an example- 9 = (2*(1.091-1))/0.02.

How to calculate Impedance using A Parameter in End Condenser Method?

With A Parameter in ECM (A_ecm) & Admittance in ECM (Y_ecm) we can find Impedance using A Parameter in End Condenser Method using the formula - Impedance in ECM = (2*(A Parameter in ECM-1))/Admittance in ECM.

What are the other ways to Calculate Impedance in ECM?

Here are the different ways to Calculate Impedance in ECM-

Impedance in ECM=(Sending End Voltage in ECM-Receiving End Voltage in ECM)/Sending End Current in ECM

Can the Impedance using A Parameter in End Condenser Method be negative?

No, the Impedance using A Parameter in End Condenser Method, measured in Electric Resistance cannot be negative.

Which unit is used to measure Impedance using A Parameter in End Condenser Method?

Impedance using A Parameter in End Condenser Method is usually measured using the Ohm[Ω] for Electric Resistance. Megohm[Ω], Microhm[Ω], Volt per Ampere[Ω] are the few other units in which Impedance using A Parameter in End Condenser Method can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Impedance using A Parameter in End Condenser Method Formula

​GoImpedance(ECM) Formula

Impedance using A Parameter in End Condenser Method Example

Impedance using A Parameter in End Condenser Method Solution

Impedance using A Parameter in End Condenser Method Formula Elements

Other Formulas to find Impedance in ECM

Other formulas in End Condenser Method in Medium Line category

How to Evaluate Impedance using A Parameter in End Condenser Method?

FAQs on Impedance using A Parameter in End Condenser Method

Variable Name

GoImpedance(ECM) Formula