FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Hydraulic Radius of Triangular Channel Section Formula

GoHydraulic Radius of Trapezoidal Channel Section Formula

Fx Copy

LaTeX Copy

Hydraulic Radius of Channel is the ratio of the cross-sectional area of a channel or pipe in which a fluid is flowing to the wet perimeter of the conduit. Check FAQs

R H = \frac{d f}{2}

R_H - Hydraulic Radius of Channel?d_f - Depth of Flow?

Hydraulic Radius of Triangular Channel Section Example

With values

With units

Only example

Here is how the Hydraulic Radius of Triangular Channel Section equation looks like with Values.

Here is how the Hydraulic Radius of Triangular Channel Section equation looks like with Units.

Here is how the Hydraulic Radius of Triangular Channel Section equation looks like.

1.65 = \frac{3.3}{2}

1.65m = \frac{3.3m}{2}

1.65 = \frac{3.3}{2}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Hydraulics and Waterworks » fx Hydraulic Radius of Triangular Channel Section

Hydraulic Radius of Triangular Channel Section Solution

Follow our step by step solution on how to calculate Hydraulic Radius of Triangular Channel Section?

FIRST Step Consider the formula

R H = \frac{d f}{2}

Next Step Substitute values of Variables

∴

R H = \frac{3.3m}{2}

Next Step Prepare to Evaluate

∴

R H = \frac{3.3}{2}

LAST Step Evaluate

∴

R H = 1.65m

Hydraulic Radius of Triangular Channel Section Formula Elements

Variables

Hydraulic Radius of Channel

Hydraulic Radius of Channel is the ratio of the cross-sectional area of a channel or pipe in which a fluid is flowing to the wet perimeter of the conduit.

Symbol: R_H

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Hydraulic Radius of Channel

Depth of Flow

Depth of Flow is the distance from the top or surface of the flow to the bottom of a channel or other waterway or Depth of Flow at the Vertical while measuring Sound Weights.

Symbol: d_f

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Depth of Flow

Other Formulas to find Hydraulic Radius of Channel

Go Hydraulic Radius of Trapezoidal Channel Section

R H = \frac{d f \cdot (B + d f \cdot (θ + \cot (θ)))}{B + 2 \cdot d f \cdot (θ + \cot (θ))}

Other formulas in Practical Channel Sections category

Go Wetted Area of Triangular Channel Section

A = ({d f}^{2}) \cdot (θ + \cot (θ))

Go Depth of Flow given Wetted Area of Triangular Channel Section

d f = \sqrt{\frac{A}{θ + \cot (θ)}}

Go Depth of Flow given Wetted Perimeter of Triangular Channel Section

d f = \frac{p}{2 \cdot (θ + \cot (θ))}

Go Wetted Perimeter of Triangular Channel Section

p = 2 \cdot d f \cdot (θ + \cot (θ))

How to Evaluate Hydraulic Radius of Triangular Channel Section?

Hydraulic Radius of Triangular Channel Section evaluator uses Hydraulic Radius of Channel = Depth of Flow/2 to evaluate the Hydraulic Radius of Channel, The Hydraulic Radius of Triangular Channel Section formula is defined as ratio of wetted Area to wetted perimeter of channel section at any point in channel. Hydraulic Radius of Channel is denoted by R_H symbol.

How to evaluate Hydraulic Radius of Triangular Channel Section using this online evaluator? To use this online evaluator for Hydraulic Radius of Triangular Channel Section, enter Depth of Flow (d_f) and hit the calculate button.

FAQs on Hydraulic Radius of Triangular Channel Section

What is the formula to find Hydraulic Radius of Triangular Channel Section?

The formula of Hydraulic Radius of Triangular Channel Section is expressed as Hydraulic Radius of Channel = Depth of Flow/2. Here is an example- 1.65 = 3.3/2.

How to calculate Hydraulic Radius of Triangular Channel Section?

With Depth of Flow (d_f) we can find Hydraulic Radius of Triangular Channel Section using the formula - Hydraulic Radius of Channel = Depth of Flow/2.

What are the other ways to Calculate Hydraulic Radius of Channel?

Here are the different ways to Calculate Hydraulic Radius of Channel-

Hydraulic Radius of Channel=(Depth of Flow*(Width of Trapezoidal Channel Section+Depth of Flow*(Theta+cot(Theta))))/(Width of Trapezoidal Channel Section+2*Depth of Flow*(Theta+cot(Theta)))

Can the Hydraulic Radius of Triangular Channel Section be negative?

No, the Hydraulic Radius of Triangular Channel Section, measured in Length cannot be negative.

Which unit is used to measure Hydraulic Radius of Triangular Channel Section?

Hydraulic Radius of Triangular Channel Section is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Hydraulic Radius of Triangular Channel Section can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit