FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Hydraulic Mean Depth for Regime Channel using Lacey's Theory Formula

Fx Copy

LaTeX Copy

Hydraulic mean depth in meters the ratio of the cross-sectional area of flow to the free water surface or top width. Check FAQs

R = (\frac{5}{2}) \cdot (\frac{{(V)}^{2}}{f})

R - Hydraulic Mean Depth in Meters?V - Velocity of Flow in Meter?f - Silt Factor?

Hydraulic Mean Depth for Regime Channel using Lacey's Theory Example

With values

With units

Only example

Here is how the Hydraulic Mean Depth for Regime Channel using Lacey's Theory equation looks like with Values.

Here is how the Hydraulic Mean Depth for Regime Channel using Lacey's Theory equation looks like with Units.

Here is how the Hydraulic Mean Depth for Regime Channel using Lacey's Theory equation looks like.

0.936 = (\frac{5}{2}) \cdot (\frac{{(1.257)}^{2}}{4.22})

0.936m = (\frac{5}{2}) \cdot (\frac{{(1.257m/s)}^{2}}{4.22})

0.936 = (\frac{5}{2}) \cdot (\frac{{(1.257)}^{2}}{4.22})

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Irrigation Engineering » fx Hydraulic Mean Depth for Regime Channel using Lacey's Theory

Hydraulic Mean Depth for Regime Channel using Lacey's Theory Solution

Follow our step by step solution on how to calculate Hydraulic Mean Depth for Regime Channel using Lacey's Theory?

FIRST Step Consider the formula

R = (\frac{5}{2}) \cdot (\frac{{(V)}^{2}}{f})

Next Step Substitute values of Variables

∴

R = (\frac{5}{2}) \cdot (\frac{{(1.257m/s)}^{2}}{4.22})

Next Step Prepare to Evaluate

∴

R = (\frac{5}{2}) \cdot (\frac{{(1.257)}^{2}}{4.22})

Next Step Evaluate

∴

R = 0.93604798578199m

LAST Step Rounding Answer

∴

R = 0.936m

Hydraulic Mean Depth for Regime Channel using Lacey's Theory Formula Elements

Variables

Hydraulic Mean Depth in Meters

Hydraulic mean depth in meters the ratio of the cross-sectional area of flow to the free water surface or top width.

Symbol: R

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Hydraulic Mean Depth in Meters

Velocity of Flow in Meter

Velocity of flow in meter is the flow velocity is defined as a superficial volume average, and it corresponds to a unit volume of the medium, including both the pores and the matrix.

Symbol: V

Measurement: SpeedUnit: m/s

Note: Value should be greater than 0.

Formulas to find Velocity of Flow in Meter

Silt Factor

Silt factor indicates the type of bed material from clay to heavy sand.

Symbol: f

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Silt Factor

Other formulas in Lacey's Theory category

Go Velocity for Regime Channel using Lacey's Theory

V = {(\frac{Q \cdot f^{2}}{140})}^{0.166}

Go Area of Regime Channel Section

A = (\frac{Q}{V})

Go Wetted Perimeter of Channel

P = 4.75 \cdot \sqrt{Q}

Go Bed Slope of Channel

S = \frac{f^{\frac{5}{3}}}{3340 \cdot Q^{\frac{1}{6}}}

How to Evaluate Hydraulic Mean Depth for Regime Channel using Lacey's Theory?

Hydraulic Mean Depth for Regime Channel using Lacey's Theory evaluator uses Hydraulic Mean Depth in Meters = (5/2)*((Velocity of Flow in Meter)^2/Silt Factor) to evaluate the Hydraulic Mean Depth in Meters, The Hydraulic Mean Depth for Regime Channel using Lacey's Theory formula is defined as the cross-section of water flowing through a channel or pipe divided by the wetted perimeter of the conduit. Hydraulic Mean Depth in Meters is denoted by R symbol.

How to evaluate Hydraulic Mean Depth for Regime Channel using Lacey's Theory using this online evaluator? To use this online evaluator for Hydraulic Mean Depth for Regime Channel using Lacey's Theory, enter Velocity of Flow in Meter (V) & Silt Factor (f) and hit the calculate button.

FAQs on Hydraulic Mean Depth for Regime Channel using Lacey's Theory

What is the formula to find Hydraulic Mean Depth for Regime Channel using Lacey's Theory?

The formula of Hydraulic Mean Depth for Regime Channel using Lacey's Theory is expressed as Hydraulic Mean Depth in Meters = (5/2)*((Velocity of Flow in Meter)^2/Silt Factor). Here is an example- 0.936048 = (5/2)*((1.257)^2/4.22).

How to calculate Hydraulic Mean Depth for Regime Channel using Lacey's Theory?

With Velocity of Flow in Meter (V) & Silt Factor (f) we can find Hydraulic Mean Depth for Regime Channel using Lacey's Theory using the formula - Hydraulic Mean Depth in Meters = (5/2)*((Velocity of Flow in Meter)^2/Silt Factor).

Can the Hydraulic Mean Depth for Regime Channel using Lacey's Theory be negative?

No, the Hydraulic Mean Depth for Regime Channel using Lacey's Theory, measured in Length cannot be negative.

Which unit is used to measure Hydraulic Mean Depth for Regime Channel using Lacey's Theory?

Hydraulic Mean Depth for Regime Channel using Lacey's Theory is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Hydraulic Mean Depth for Regime Channel using Lacey's Theory can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Hydraulic Mean Depth for Regime Channel using Lacey's Theory Formula

Hydraulic Mean Depth for Regime Channel using Lacey's Theory Example

Hydraulic Mean Depth for Regime Channel using Lacey's Theory Solution

Hydraulic Mean Depth for Regime Channel using Lacey's Theory Formula Elements

Other formulas in Lacey's Theory category

How to Evaluate Hydraulic Mean Depth for Regime Channel using Lacey's Theory?

FAQs on Hydraulic Mean Depth for Regime Channel using Lacey's Theory

Variable Name