FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Hydraulic Depth given Section Factor Formula

Fx Copy

LaTeX Copy

Hydraulic Depth is defined as depth which in contact with water. Check FAQs

D Hydraulic = {(\frac{Z}{A})}^{2}

D_Hydraulic - Hydraulic Depth?Z - Section Factor?A - Wetted Surface Area of Channel?

Hydraulic Depth given Section Factor Example

With values

With units

Only example

Here is how the Hydraulic Depth given Section Factor equation looks like with Values.

Here is how the Hydraulic Depth given Section Factor equation looks like with Units.

Here is how the Hydraulic Depth given Section Factor equation looks like.

0.074 = {(\frac{6.8}{25})}^{2}

0.074m = {(\frac{6.8m^2.5}{25m²})}^{2}

0.074 = {(\frac{6.8}{25})}^{2}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Hydraulics and Waterworks » fx Hydraulic Depth given Section Factor

Hydraulic Depth given Section Factor Solution

Follow our step by step solution on how to calculate Hydraulic Depth given Section Factor?

FIRST Step Consider the formula

D Hydraulic = {(\frac{Z}{A})}^{2}

Next Step Substitute values of Variables

∴

D Hydraulic = {(\frac{6.8m^2.5}{25m²})}^{2}

Next Step Prepare to Evaluate

∴

D Hydraulic = {(\frac{6.8}{25})}^{2}

Next Step Evaluate

∴

D Hydraulic = 0.073984m

LAST Step Rounding Answer

∴

D Hydraulic = 0.074m

Hydraulic Depth given Section Factor Formula Elements

Variables

Hydraulic Depth

Hydraulic Depth is defined as depth which in contact with water.

Symbol: D_Hydraulic

Measurement: LengthUnit: m

Note: Value can be positive or negative.

Formulas to find Hydraulic Depth

Section Factor

Section Factor is ratio of normal to critical channel depth.

Symbol: Z

Measurement: Section FactorUnit: m^2.5

Note: Value can be positive or negative.

Formulas to find Section Factor

Wetted Surface Area of Channel

Wetted Surface Area of Channel [length^2] is the total area of outer surface in contact with the surrounding water.

Symbol: A

Measurement: AreaUnit: m²

Note: Value can be positive or negative.

Formulas to find Wetted Surface Area of Channel

Other formulas in Section Factor category

Go Section Factor in open channel

Z = 0.544331054 \cdot T \cdot ({d f}^{1.5})

Go Wetted Area given Section Factor

A = \frac{Z}{\sqrt{D Hydraulic}}

Go Top Width given Section Factors

T = \frac{A^{3}}{Z^{2}}

How to Evaluate Hydraulic Depth given Section Factor?

Hydraulic Depth given Section Factor evaluator uses Hydraulic Depth = (Section Factor/Wetted Surface Area of Channel)^2 to evaluate the Hydraulic Depth, The Hydraulic Depth given Section Factor is defined as wetted area of the channel to that of perimeter of channel section. Hydraulic Depth is denoted by D_Hydraulic symbol.

How to evaluate Hydraulic Depth given Section Factor using this online evaluator? To use this online evaluator for Hydraulic Depth given Section Factor, enter Section Factor (Z) & Wetted Surface Area of Channel (A) and hit the calculate button.

FAQs on Hydraulic Depth given Section Factor

What is the formula to find Hydraulic Depth given Section Factor?

The formula of Hydraulic Depth given Section Factor is expressed as Hydraulic Depth = (Section Factor/Wetted Surface Area of Channel)^2. Here is an example- 0.16 = (6.8/25)^2.

How to calculate Hydraulic Depth given Section Factor?

With Section Factor (Z) & Wetted Surface Area of Channel (A) we can find Hydraulic Depth given Section Factor using the formula - Hydraulic Depth = (Section Factor/Wetted Surface Area of Channel)^2.

Can the Hydraulic Depth given Section Factor be negative?

Yes, the Hydraulic Depth given Section Factor, measured in Length can be negative.

Which unit is used to measure Hydraulic Depth given Section Factor?

Hydraulic Depth given Section Factor is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Hydraulic Depth given Section Factor can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Hydraulic Depth given Section Factor Formula

Hydraulic Depth given Section Factor Example

Hydraulic Depth given Section Factor Solution

Hydraulic Depth given Section Factor Formula Elements

Other formulas in Section Factor category

How to Evaluate Hydraulic Depth given Section Factor?

FAQs on Hydraulic Depth given Section Factor

Variable Name