FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Height of Tank given Detention Time for Circular Tank Formula

GoDepth of Tank given Height to Length Ratio Formula

Fx Copy

LaTeX Copy

Depth is the vertical distance from the surface of a reference point, such as the ground or water surface, to a specific point or feature below. Check FAQs

d = ((\frac{T d \cdot Q d}{{(D)}^{2}}) - (0.011 \cdot D)) \cdot (\frac{1}{0.785})

d - Depth?T_d - Detention Time?Q_d - Discharge in Tank?D - Diameter?

Height of Tank given Detention Time for Circular Tank Example

With values

With units

Only example

Here is how the Height of Tank given Detention Time for Circular Tank equation looks like with Values.

Here is how the Height of Tank given Detention Time for Circular Tank equation looks like with Units.

Here is how the Height of Tank given Detention Time for Circular Tank equation looks like.

3.0611 = ((\frac{6.9 \cdot 8.2}{{(4.8)}^{2}}) - (0.011 \cdot 4.8)) \cdot (\frac{1}{0.785})

3.0611m = ((\frac{6.9s \cdot 8.2m³/s}{{(4.8m)}^{2}}) - (0.011 \cdot 4.8m)) \cdot (\frac{1}{0.785})

3.0611 = ((\frac{6.9 \cdot 8.2}{{(4.8)}^{2}}) - (0.011 \cdot 4.8)) \cdot (\frac{1}{0.785})

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Environmental Engineering » fx Height of Tank given Detention Time for Circular Tank

Height of Tank given Detention Time for Circular Tank Solution

Follow our step by step solution on how to calculate Height of Tank given Detention Time for Circular Tank?

FIRST Step Consider the formula

d = ((\frac{T d \cdot Q d}{{(D)}^{2}}) - (0.011 \cdot D)) \cdot (\frac{1}{0.785})

Next Step Substitute values of Variables

∴

d = ((\frac{6.9s \cdot 8.2m³/s}{{(4.8m)}^{2}}) - (0.011 \cdot 4.8m)) \cdot (\frac{1}{0.785})

Next Step Prepare to Evaluate

∴

d = ((\frac{6.9 \cdot 8.2}{{(4.8)}^{2}}) - (0.011 \cdot 4.8)) \cdot (\frac{1}{0.785})

Next Step Evaluate

∴

d = 3.06105626326964m

LAST Step Rounding Answer

∴

d = 3.0611m

Height of Tank given Detention Time for Circular Tank Formula Elements

Variables

Depth

Depth is the vertical distance from the surface of a reference point, such as the ground or water surface, to a specific point or feature below.

Symbol: d

Measurement: LengthUnit: m

Note: Value can be positive or negative.

Formulas to find Depth

Detention Time

Detention Time is the length of time the water is retained in a vessel or basin.

Symbol: T_d

Measurement: TimeUnit: s

Note: Value should be greater than 0.

Formulas to find Detention Time

Discharge in Tank

Discharge in Tank is the volumetric flow rate of water that is transported through a given cross-sectional area. It includes any suspended solids, dissolved chemicals, or biologic material.

Symbol: Q_d

Measurement: Volumetric Flow RateUnit: m³/s

Note: Value should be greater than 0.

Formulas to find Discharge in Tank

Diameter

Diameter is the straight-line distance passing through the center of a circular cross-section, connecting two points on its boundary.

Symbol: D

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Diameter

Other Formulas to find Depth

Go Depth of Tank given Height to Length Ratio

d = (\frac{Q}{v s \cdot w}) \cdot (HL)

How to Evaluate Height of Tank given Detention Time for Circular Tank?

Height of Tank given Detention Time for Circular Tank evaluator uses Depth = (((Detention Time*Discharge in Tank)/(Diameter)^2)-(0.011*Diameter))*(1/0.785) to evaluate the Depth, The Height of Tank given Detention Time for Circular Tank formula is defined as the value of the vertical dimension (height) of a circular tank that is necessary to achieve a specific detention time. Depth is denoted by d symbol.

How to evaluate Height of Tank given Detention Time for Circular Tank using this online evaluator? To use this online evaluator for Height of Tank given Detention Time for Circular Tank, enter Detention Time (T_d), Discharge in Tank (Q_d) & Diameter (D) and hit the calculate button.

FAQs on Height of Tank given Detention Time for Circular Tank

What is the formula to find Height of Tank given Detention Time for Circular Tank?

The formula of Height of Tank given Detention Time for Circular Tank is expressed as Depth = (((Detention Time*Discharge in Tank)/(Diameter)^2)-(0.011*Diameter))*(1/0.785). Here is an example- 3.061056 = (((6.9*8.2)/(4.8)^2)-(0.011*4.8))*(1/0.785).

How to calculate Height of Tank given Detention Time for Circular Tank?

With Detention Time (T_d), Discharge in Tank (Q_d) & Diameter (D) we can find Height of Tank given Detention Time for Circular Tank using the formula - Depth = (((Detention Time*Discharge in Tank)/(Diameter)^2)-(0.011*Diameter))*(1/0.785).

What are the other ways to Calculate Depth?

Here are the different ways to Calculate Depth-

Depth=(Discharge/(Settling Velocity*Width))*(Ratio of Height to Length)

Can the Height of Tank given Detention Time for Circular Tank be negative?

Yes, the Height of Tank given Detention Time for Circular Tank, measured in Length can be negative.

Which unit is used to measure Height of Tank given Detention Time for Circular Tank?

Height of Tank given Detention Time for Circular Tank is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Height of Tank given Detention Time for Circular Tank can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Height of Tank given Detention Time for Circular Tank Formula

​GoDepth of Tank given Height to Length Ratio Formula

Height of Tank given Detention Time for Circular Tank Example

Height of Tank given Detention Time for Circular Tank Solution

Height of Tank given Detention Time for Circular Tank Formula Elements

Other Formulas to find Depth

How to Evaluate Height of Tank given Detention Time for Circular Tank?

FAQs on Height of Tank given Detention Time for Circular Tank

Variable Name

GoDepth of Tank given Height to Length Ratio Formula