FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Height of Settling Zone given Height at Outlet Zone with respect to Discharge Formula

GoHeight of Settling Zone given Detention Time Formula

GoHeight of Settling Zone given Height at Outlet Zone with respect to Settling Velocity Formula

Fx Copy

LaTeX Copy

The Height of Crack refers to the size of a flaw or crack in a material that can lead to catastrophic failure under a given stress. Check FAQs

h = H \cdot \frac{Q}{L \cdot w \cdot v'}

h - Height of Crack?H - Outer Height?Q - Discharge?L - Length?w - Width?v^' - Falling Speed?

Height of Settling Zone given Height at Outlet Zone with respect to Discharge Example

With values

With units

Only example

Here is how the Height of Settling Zone given Height at Outlet Zone with respect to Discharge equation looks like with Values.

Here is how the Height of Settling Zone given Height at Outlet Zone with respect to Discharge equation looks like with Units.

Here is how the Height of Settling Zone given Height at Outlet Zone with respect to Discharge equation looks like.

14701.6012 = 40 \cdot \frac{1.01}{12 \cdot 2.29 \cdot 0.1}

14701.6012mm = 40m \cdot \frac{1.01m³/s}{12m \cdot 2.29m \cdot 0.1m/s}

14701.6012 = 40 \cdot \frac{1.01}{12 \cdot 2.29 \cdot 0.1}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Environmental Engineering » fx Height of Settling Zone given Height at Outlet Zone with respect to Discharge

Height of Settling Zone given Height at Outlet Zone with respect to Discharge Solution

Follow our step by step solution on how to calculate Height of Settling Zone given Height at Outlet Zone with respect to Discharge?

FIRST Step Consider the formula

h = H \cdot \frac{Q}{L \cdot w \cdot v'}

Next Step Substitute values of Variables

∴

h = 40m \cdot \frac{1.01m³/s}{12m \cdot 2.29m \cdot 0.1m/s}

Next Step Prepare to Evaluate

∴

h = 40 \cdot \frac{1.01}{12 \cdot 2.29 \cdot 0.1}

Next Step Evaluate

∴

h = 14.7016011644833m

Next Step Convert to Output's Unit

∴

h = 14701.6011644833mm

LAST Step Rounding Answer

∴

h = 14701.6012mm

Height of Settling Zone given Height at Outlet Zone with respect to Discharge Formula Elements

Variables

Height of Crack

The Height of Crack refers to the size of a flaw or crack in a material that can lead to catastrophic failure under a given stress.

Symbol: h

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Height of Crack

Outer Height

The Outer Height refers to the external vertical dimension of an object or structure.

Symbol: H

Measurement: LengthUnit: m

Note: Value can be positive or negative.

Formulas to find Outer Height

Discharge

The Discharge refers to the volume of fluid (usually water) that flows through a given cross-sectional area per unit of time.

Symbol: Q

Measurement: Volumetric Flow RateUnit: m³/s

Note: Value can be positive or negative.

Formulas to find Discharge

Length

The Length refers to the measurement of the distance between two points.

Symbol: L

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Length

Width

The Width of a sedimentation tank refers to the horizontal dimension across the tank, typically measured perpendicular to the flow of water in a rectangular tank.

Symbol: w

Measurement: LengthUnit: m

Note: Value can be positive or negative.

Formulas to find Width

Falling Speed

The Falling Speed refers to the constant speed at which a particle falls through a fluid when the force of gravity is balanced by the drag force and buoyant force acting on the particle.

Symbol: v^'

Measurement: SpeedUnit: m/s

Note: Value should be greater than 0.

Formulas to find Falling Speed

Other Formulas to find Height of Crack

Go Height of Settling Zone given Detention Time

h = \frac{T d \cdot Q}{L \cdot w}

Go Height of Settling Zone given Height at Outlet Zone with respect to Settling Velocity

h = H \cdot \frac{V s}{v'}

Go Height of Settling Zone given Ratio of Removal with respect to Tank Height

h = \frac{H}{R r}

Go Height of Settling Zone given Height at Outlet Zone with respect to Area of Tank

h = H \cdot \frac{Q}{v' \cdot A cs}

How to Evaluate Height of Settling Zone given Height at Outlet Zone with respect to Discharge?

Height of Settling Zone given Height at Outlet Zone with respect to Discharge evaluator uses Height of Crack = Outer Height*Discharge/(Length*Width*Falling Speed) to evaluate the Height of Crack, The Height of Settling Zone given Height at Outlet Zone with respect to Discharge formula is defined as the vertical distance through which water flows and particles settle under gravity before the water exits the tank as clarified effluent. Height of Crack is denoted by h symbol.

How to evaluate Height of Settling Zone given Height at Outlet Zone with respect to Discharge using this online evaluator? To use this online evaluator for Height of Settling Zone given Height at Outlet Zone with respect to Discharge, enter Outer Height (H), Discharge (Q), Length (L), Width (w) & Falling Speed (v^') and hit the calculate button.

FAQs on Height of Settling Zone given Height at Outlet Zone with respect to Discharge

What is the formula to find Height of Settling Zone given Height at Outlet Zone with respect to Discharge?

The formula of Height of Settling Zone given Height at Outlet Zone with respect to Discharge is expressed as Height of Crack = Outer Height*Discharge/(Length*Width*Falling Speed). Here is an example- 3.5E+7 = 40*1.01/(12*2.29*0.1).

How to calculate Height of Settling Zone given Height at Outlet Zone with respect to Discharge?

With Outer Height (H), Discharge (Q), Length (L), Width (w) & Falling Speed (v^') we can find Height of Settling Zone given Height at Outlet Zone with respect to Discharge using the formula - Height of Crack = Outer Height*Discharge/(Length*Width*Falling Speed).

What are the other ways to Calculate Height of Crack?

Here are the different ways to Calculate Height of Crack-

Height of Crack=(Detention Time*Discharge)/(Length*Width)
Height of Crack=Outer Height*Settling Velocity/Falling Speed
Height of Crack=Outer Height/Removal Ratio

Can the Height of Settling Zone given Height at Outlet Zone with respect to Discharge be negative?

No, the Height of Settling Zone given Height at Outlet Zone with respect to Discharge, measured in Length cannot be negative.

Which unit is used to measure Height of Settling Zone given Height at Outlet Zone with respect to Discharge?

Height of Settling Zone given Height at Outlet Zone with respect to Discharge is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Height of Settling Zone given Height at Outlet Zone with respect to Discharge can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Height of Settling Zone given Height at Outlet Zone with respect to Discharge Formula

​GoHeight of Settling Zone given Detention Time Formula

​GoHeight of Settling Zone given Height at Outlet Zone with respect to Settling Velocity Formula

Height of Settling Zone given Height at Outlet Zone with respect to Discharge Example

Height of Settling Zone given Height at Outlet Zone with respect to Discharge Solution

Height of Settling Zone given Height at Outlet Zone with respect to Discharge Formula Elements

Other Formulas to find Height of Crack

How to Evaluate Height of Settling Zone given Height at Outlet Zone with respect to Discharge?

FAQs on Height of Settling Zone given Height at Outlet Zone with respect to Discharge

Variable Name

GoHeight of Settling Zone given Detention Time Formula

GoHeight of Settling Zone given Height at Outlet Zone with respect to Settling Velocity Formula