FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Height of Bent Cuboid given Volume, Total Length and Width Formula

GoHeight of Bent Cuboid given Space Diagonal, Total Length and First Partial Length Formula

GoHeight of Bent Cuboid given Space Diagonal, Total Length and Second Partial Length Formula

Fx Copy

LaTeX Copy

Height of Bent Cuboid is the distance between the lowest and highest points of Bent Cuboid standing upright and equal to the height of the cuboid which is bent to form Bent Cuboid. Check FAQs

h = \frac{V}{(l Total - w) \cdot w}

h - Height of Bent Cuboid?V - Volume of Bent Cuboid?l_Total - Total Length of Bent Cuboid?w - Width of Bent Cuboid?

Height of Bent Cuboid given Volume, Total Length and Width Example

With values

With units

Only example

Here is how the Height of Bent Cuboid given Volume, Total Length and Width equation looks like with Values.

Here is how the Height of Bent Cuboid given Volume, Total Length and Width equation looks like with Units.

Here is how the Height of Bent Cuboid given Volume, Total Length and Width equation looks like.

9.0476 = \frac{190}{(10 - 3) \cdot 3}

9.0476m = \frac{190m³}{(10m - 3m) \cdot 3m}

9.0476 = \frac{190}{(10 - 3) \cdot 3}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Math » Category

Geometry » Category

3D Geometry » fx Height of Bent Cuboid given Volume, Total Length and Width

Height of Bent Cuboid given Volume, Total Length and Width Solution

Follow our step by step solution on how to calculate Height of Bent Cuboid given Volume, Total Length and Width?

FIRST Step Consider the formula

h = \frac{V}{(l Total - w) \cdot w}

Next Step Substitute values of Variables

∴

h = \frac{190m³}{(10m - 3m) \cdot 3m}

Next Step Prepare to Evaluate

∴

h = \frac{190}{(10 - 3) \cdot 3}

Next Step Evaluate

∴

h = 9.04761904761905m

LAST Step Rounding Answer

∴

h = 9.0476m

Height of Bent Cuboid given Volume, Total Length and Width Formula Elements

Variables

Height of Bent Cuboid

Height of Bent Cuboid is the distance between the lowest and highest points of Bent Cuboid standing upright and equal to the height of the cuboid which is bent to form Bent Cuboid.

Symbol: h

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Height of Bent Cuboid

Volume of Bent Cuboid

Volume of Bent Cuboid is the amount of 3-dimensional space enclosed by the surface of Bent Cuboid.

Symbol: V

Measurement: VolumeUnit: m³

Note: Value should be greater than 0.

Formulas to find Volume of Bent Cuboid

Total Length of Bent Cuboid

Total Length of Bent Cuboid is addition of two lengths of the parts of Bent Cuboid and equal to the length of the cuboid which is bent to form Bent Cuboid.

Symbol: l_Total

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Total Length of Bent Cuboid

Width of Bent Cuboid

Width of Bent Cuboid is the measurement or extent of Bent Cuboid from side to side and equal to the width of the cuboid which is bent to form Bent Cuboid.

Symbol: w

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Width of Bent Cuboid

Other Formulas to find Height of Bent Cuboid

Go Height of Bent Cuboid given Space Diagonal, Total Length and First Partial Length

h = \sqrt{{d Space}^{2} - {(l Total - l First Partial)}^{2} - {l First Partial}^{2}}

Go Height of Bent Cuboid given Space Diagonal, Total Length and Second Partial Length

h = \sqrt{{d Space}^{2} - {(l Total - l Second Partial)}^{2} - {l Second Partial}^{2}}

Go Height of Bent Cuboid given Space Diagonal

h = \sqrt{{d Space}^{2} - {l First Partial}^{2} - {l Second Partial}^{2}}

How to Evaluate Height of Bent Cuboid given Volume, Total Length and Width?

Height of Bent Cuboid given Volume, Total Length and Width evaluator uses Height of Bent Cuboid = Volume of Bent Cuboid/((Total Length of Bent Cuboid-Width of Bent Cuboid)*Width of Bent Cuboid) to evaluate the Height of Bent Cuboid, Height of Bent Cuboid given Volume, Total Length and Width formula is defined as the distance between the lowest and highest points of Bent Cuboid standing upright, it is equal to the height of the cuboid which is bent to form the Bent Cuboid and calculated using volume, total length, and width of Bent Cuboid. Height of Bent Cuboid is denoted by h symbol.

How to evaluate Height of Bent Cuboid given Volume, Total Length and Width using this online evaluator? To use this online evaluator for Height of Bent Cuboid given Volume, Total Length and Width, enter Volume of Bent Cuboid (V), Total Length of Bent Cuboid (l_Total) & Width of Bent Cuboid (w) and hit the calculate button.

FAQs on Height of Bent Cuboid given Volume, Total Length and Width

What is the formula to find Height of Bent Cuboid given Volume, Total Length and Width?

The formula of Height of Bent Cuboid given Volume, Total Length and Width is expressed as Height of Bent Cuboid = Volume of Bent Cuboid/((Total Length of Bent Cuboid-Width of Bent Cuboid)*Width of Bent Cuboid). Here is an example- 9.047619 = 190/((10-3)*3).

How to calculate Height of Bent Cuboid given Volume, Total Length and Width?

With Volume of Bent Cuboid (V), Total Length of Bent Cuboid (l_Total) & Width of Bent Cuboid (w) we can find Height of Bent Cuboid given Volume, Total Length and Width using the formula - Height of Bent Cuboid = Volume of Bent Cuboid/((Total Length of Bent Cuboid-Width of Bent Cuboid)*Width of Bent Cuboid).

What are the other ways to Calculate Height of Bent Cuboid?

Here are the different ways to Calculate Height of Bent Cuboid-

Height of Bent Cuboid=sqrt(Space Diagonal of Bent Cuboid^2-(Total Length of Bent Cuboid-First Partial Length of Bent Cuboid)^2-First Partial Length of Bent Cuboid^2)
Height of Bent Cuboid=sqrt(Space Diagonal of Bent Cuboid^2-(Total Length of Bent Cuboid-Second Partial Length of Bent Cuboid)^2-Second Partial Length of Bent Cuboid^2)
Height of Bent Cuboid=sqrt(Space Diagonal of Bent Cuboid^2-First Partial Length of Bent Cuboid^2-Second Partial Length of Bent Cuboid^2)

Can the Height of Bent Cuboid given Volume, Total Length and Width be negative?

No, the Height of Bent Cuboid given Volume, Total Length and Width, measured in Length cannot be negative.

Which unit is used to measure Height of Bent Cuboid given Volume, Total Length and Width?

Height of Bent Cuboid given Volume, Total Length and Width is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Height of Bent Cuboid given Volume, Total Length and Width can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Height of Bent Cuboid given Volume, Total Length and Width Formula

​GoHeight of Bent Cuboid given Space Diagonal, Total Length and First Partial Length Formula

​GoHeight of Bent Cuboid given Space Diagonal, Total Length and Second Partial Length Formula

Height of Bent Cuboid given Volume, Total Length and Width Example

Height of Bent Cuboid given Volume, Total Length and Width Solution

Height of Bent Cuboid given Volume, Total Length and Width Formula Elements

Other Formulas to find Height of Bent Cuboid

How to Evaluate Height of Bent Cuboid given Volume, Total Length and Width?

FAQs on Height of Bent Cuboid given Volume, Total Length and Width

Variable Name

GoHeight of Bent Cuboid given Space Diagonal, Total Length and First Partial Length Formula

GoHeight of Bent Cuboid given Space Diagonal, Total Length and Second Partial Length Formula