FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Heat Exchanger Volume for Hydrocarbon Applications Formula

GoHeat Exchanger Volume for Air Separation Applications Formula

Fx Copy

LaTeX Copy

Heat Exchanger Volume refers to the physical space or capacity occupied by a heat exchanger within a system or structure. Check FAQs

V h = \frac{\frac{Q}{ΔT LMTD}}{100000}

V_h - Heat Exchanger Volume?Q - Heat Duty of Heat Exchanger?ΔT_LMTD - Log Mean Temperature Difference?

Heat Exchanger Volume for Hydrocarbon Applications Example

With values

With units

Only example

Here is how the Heat Exchanger Volume for Hydrocarbon Applications equation looks like with Values.

Here is how the Heat Exchanger Volume for Hydrocarbon Applications equation looks like with Units.

Here is how the Heat Exchanger Volume for Hydrocarbon Applications equation looks like.

4.4E-5 = \frac{\frac{173}{39.1667}}{100000}

4.4E-5m³ = \frac{\frac{173W}{39.1667K}}{100000}

4.4E-5 = \frac{\frac{173}{39.1667}}{100000}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Chemical Engineering » Category

Process Equipment Design » fx Heat Exchanger Volume for Hydrocarbon Applications

Heat Exchanger Volume for Hydrocarbon Applications Solution

Follow our step by step solution on how to calculate Heat Exchanger Volume for Hydrocarbon Applications?

FIRST Step Consider the formula

V h = \frac{\frac{Q}{ΔT LMTD}}{100000}

Next Step Substitute values of Variables

∴

V h = \frac{\frac{173W}{39.1667K}}{100000}

Next Step Prepare to Evaluate

∴

V h = \frac{\frac{173}{39.1667}}{100000}

Next Step Evaluate

∴

V h = 4.4170175174319E-05m³

LAST Step Rounding Answer

∴

V h = 4.4E-5m³

Heat Exchanger Volume for Hydrocarbon Applications Formula Elements

Variables

Heat Exchanger Volume

Heat Exchanger Volume refers to the physical space or capacity occupied by a heat exchanger within a system or structure.

Symbol: V_h

Measurement: VolumeUnit: m³

Note: Value should be greater than 0.

Formulas to find Heat Exchanger Volume

Heat Duty of Heat Exchanger

Heat Duty of Heat Exchanger refers to the amount of heat transfer that occurs between two fluid streams as they pass through the exchanger.

Symbol: Q

Measurement: PowerUnit: W

Note: Value can be positive or negative.

Formulas to find Heat Duty of Heat Exchanger

Log Mean Temperature Difference

Log Mean Temperature Difference is the logarithmic temperature difference averaged between 2 fluid streams exchanging heat.

Symbol: ΔT_LMTD

Measurement: TemperatureUnit: K

Note: Value should be greater than 0.

Formulas to find Log Mean Temperature Difference

Other Formulas to find Heat Exchanger Volume

Go Heat Exchanger Volume for Air Separation Applications

V h = \frac{\frac{Q}{ΔT LMTD}}{50000}

Other formulas in Basic Formulas of Heat Exchanger Designs category

Go Equivalent Diameter for Square Pitch in Heat Exchanger

D e = (\frac{1.27}{D Outer}) \cdot (({P Tube}^{2}) - 0.785 \cdot ({D Outer}^{2}))

Go Equivalent Diameter for Triangular Pitch in Heat Exchanger

D e = (\frac{1.10}{D Outer}) \cdot (({P Tube}^{2}) - 0.917 \cdot ({D Outer}^{2}))

Go Number of Baffles in Shell and Tube Heat Exchanger

N Baffles = (\frac{L Tube}{L Baffle}) - 1

Go Number of Tubes in Center Row Given Bundle Diameter and Tube Pitch

N r = \frac{D B}{P Tube}

How to Evaluate Heat Exchanger Volume for Hydrocarbon Applications?

Heat Exchanger Volume for Hydrocarbon Applications evaluator uses Heat Exchanger Volume = (Heat Duty of Heat Exchanger/Log Mean Temperature Difference)/100000 to evaluate the Heat Exchanger Volume, The Heat Exchanger Volume for Hydrocarbon Applications formula is defined as physical space or capacity within a heat exchanger when the heat transfer takes place between fluids where either one of them is hydrocarbon. Heat Exchanger Volume is denoted by V_h symbol.

How to evaluate Heat Exchanger Volume for Hydrocarbon Applications using this online evaluator? To use this online evaluator for Heat Exchanger Volume for Hydrocarbon Applications, enter Heat Duty of Heat Exchanger (Q) & Log Mean Temperature Difference (ΔT_LMTD) and hit the calculate button.

FAQs on Heat Exchanger Volume for Hydrocarbon Applications

What is the formula to find Heat Exchanger Volume for Hydrocarbon Applications?

The formula of Heat Exchanger Volume for Hydrocarbon Applications is expressed as Heat Exchanger Volume = (Heat Duty of Heat Exchanger/Log Mean Temperature Difference)/100000. Here is an example- 5.8E-5 = (173/39.1667)/100000.

How to calculate Heat Exchanger Volume for Hydrocarbon Applications?

With Heat Duty of Heat Exchanger (Q) & Log Mean Temperature Difference (ΔT_LMTD) we can find Heat Exchanger Volume for Hydrocarbon Applications using the formula - Heat Exchanger Volume = (Heat Duty of Heat Exchanger/Log Mean Temperature Difference)/100000.

What are the other ways to Calculate Heat Exchanger Volume?

Here are the different ways to Calculate Heat Exchanger Volume-

Heat Exchanger Volume=(Heat Duty of Heat Exchanger/Log Mean Temperature Difference)/50000

Can the Heat Exchanger Volume for Hydrocarbon Applications be negative?

No, the Heat Exchanger Volume for Hydrocarbon Applications, measured in Volume cannot be negative.

Which unit is used to measure Heat Exchanger Volume for Hydrocarbon Applications?

Heat Exchanger Volume for Hydrocarbon Applications is usually measured using the Cubic Meter[m³] for Volume. Cubic Centimeter[m³], Cubic Millimeter[m³], Liter[m³] are the few other units in which Heat Exchanger Volume for Hydrocarbon Applications can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit