FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Ground Capacitance Formula

Fx Copy

LaTeX Copy

Ground Capacitance is the capacitance at the ground of the CMOS Circuit. Check FAQs

C gnd = (\frac{V agr \cdot C adj}{V tm}) - C adj

C_gnd - Ground Capacitance?V_agr - Agressor Voltage?C_adj - Adjacent Capacitance?V_tm - Victim Voltage?

Ground Capacitance Example

With values

With units

Only example

Here is how the Ground Capacitance equation looks like with Values.

Here is how the Ground Capacitance equation looks like with Units.

Here is how the Ground Capacitance equation looks like.

2.9804 = (\frac{17.5 \cdot 8}{12.75}) - 8

2.9804pF = (\frac{17.5V \cdot 8pF}{12.75V}) - 8pF

2.9804 = (\frac{17.5 \cdot 8}{12.75}) - 8

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Electronics » Category

CMOS Design and Applications » fx Ground Capacitance

Ground Capacitance Solution

Follow our step by step solution on how to calculate Ground Capacitance?

FIRST Step Consider the formula

C gnd = (\frac{V agr \cdot C adj}{V tm}) - C adj

Next Step Substitute values of Variables

∴

C gnd = (\frac{17.5V \cdot 8pF}{12.75V}) - 8pF

Next Step Convert Units

∴

C gnd = (\frac{17.5V \cdot 8E-12F}{12.75V}) - 8E-12F

Next Step Prepare to Evaluate

∴

C gnd = (\frac{17.5 \cdot 8E-12}{12.75}) - 8E-12

Next Step Evaluate

∴

C gnd = 2.98039215686275E-12F

Next Step Convert to Output's Unit

∴

C gnd = 2.98039215686275pF

LAST Step Rounding Answer

∴

C gnd = 2.9804pF

Ground Capacitance Formula Elements

Variables

Ground Capacitance

Ground Capacitance is the capacitance at the ground of the CMOS Circuit.

Symbol: C_gnd

Measurement: CapacitanceUnit: pF

Note: Value should be greater than 0.

Formulas to find Ground Capacitance

Agressor Voltage

Agressor Voltage refers to the avoided voltage in a CMOS circuit, which is typically a small positive voltage added to the input signal to avoid unwanted triggering of the circuit.

Symbol: V_agr

Measurement: Electric PotentialUnit: V

Note: Value should be greater than 0.

Formulas to find Agressor Voltage

Adjacent Capacitance

Adjacent capacitance is the capacitance at adjacent point.

Symbol: C_adj

Measurement: CapacitanceUnit: pF

Note: Value should be greater than 0.

Formulas to find Adjacent Capacitance

Victim Voltage

Victim Voltage is calculated when the victim being actively driven, then the driver will supply current to oppose to reduce the victim's noise.

Symbol: V_tm

Measurement: Electric PotentialUnit: V

Note: Value should be greater than 0.

Formulas to find Victim Voltage

Other formulas in Array Datapath Subsystem category

Go Carry-Ripple Adder Critical Path Delay

T ripple = t pg + (N gates - 1) \cdot T ao + T xor

Go 'XOR' Delay

T xor = T ripple - (t pg + (N gates - 1) \cdot T ao)

Go N-Bit Carry-Skip Adder

N carry = n \cdot K

Go K-Input 'And' Gate

K = \frac{N carry}{n}

How to Evaluate Ground Capacitance?

Ground Capacitance evaluator uses Ground Capacitance = ((Agressor Voltage*Adjacent Capacitance)/Victim Voltage)-Adjacent Capacitance to evaluate the Ground Capacitance, The Ground Capacitance formula is defined as the ratio of the amount of electric charge stored on a conductor to the difference in electric potential. Ground Capacitance is denoted by C_gnd symbol.

How to evaluate Ground Capacitance using this online evaluator? To use this online evaluator for Ground Capacitance, enter Agressor Voltage (V_agr), Adjacent Capacitance (C_adj) & Victim Voltage (V_tm) and hit the calculate button.

FAQs on Ground Capacitance

What is the formula to find Ground Capacitance?

The formula of Ground Capacitance is expressed as Ground Capacitance = ((Agressor Voltage*Adjacent Capacitance)/Victim Voltage)-Adjacent Capacitance. Here is an example- 3E+12 = ((17.5*8E-12)/12.75)-8E-12.

How to calculate Ground Capacitance?

With Agressor Voltage (V_agr), Adjacent Capacitance (C_adj) & Victim Voltage (V_tm) we can find Ground Capacitance using the formula - Ground Capacitance = ((Agressor Voltage*Adjacent Capacitance)/Victim Voltage)-Adjacent Capacitance.

Can the Ground Capacitance be negative?

No, the Ground Capacitance, measured in Capacitance cannot be negative.

Which unit is used to measure Ground Capacitance?

Ground Capacitance is usually measured using the Picofarad[pF] for Capacitance. Farad[pF], Kilofarad[pF], Millifarad[pF] are the few other units in which Ground Capacitance can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Ground Capacitance Formula

Ground Capacitance Example

Ground Capacitance Solution

Ground Capacitance Formula Elements

Other formulas in Array Datapath Subsystem category

How to Evaluate Ground Capacitance?

FAQs on Ground Capacitance

Variable Name