FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Gate Source Capacitance Given Overlap Capacitance Formula

Fx Copy

LaTeX Copy

Gate Source Capacitance refers to the capacitance between the gate and source terminals of a field-effect transistor (FET). Check FAQs

C gs = (\frac{2}{3} \cdot W t \cdot L t \cdot C ox) + (W t \cdot C ov)

C_gs - Gate Source Capacitance?W_t - Transistor's Width?L_t - Transistor's Length?C_ox - Oxide Capacitance?C_ov - Overlap Capacitance?

Gate Source Capacitance Given Overlap Capacitance Example

With values

With units

Only example

Here is how the Gate Source Capacitance Given Overlap Capacitance equation looks like with Values.

Here is how the Gate Source Capacitance Given Overlap Capacitance equation looks like with Units.

Here is how the Gate Source Capacitance Given Overlap Capacitance equation looks like.

13.75 = (\frac{2}{3} \cdot 5.5 \cdot 3.2 \cdot 3.9) + (5.5 \cdot 2.5)

13.75μF = (\frac{2}{3} \cdot 5.5μm \cdot 3.2μm \cdot 3.9F) + (5.5μm \cdot 2.5F)

13.75 = (\frac{2}{3} \cdot 5.5 \cdot 3.2 \cdot 3.9) + (5.5 \cdot 2.5)

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Electronics » Category

Integrated Circuits (IC) » fx Gate Source Capacitance Given Overlap Capacitance

Gate Source Capacitance Given Overlap Capacitance Solution

Follow our step by step solution on how to calculate Gate Source Capacitance Given Overlap Capacitance?

FIRST Step Consider the formula

C gs = (\frac{2}{3} \cdot W t \cdot L t \cdot C ox) + (W t \cdot C ov)

Next Step Substitute values of Variables

∴

C gs = (\frac{2}{3} \cdot 5.5μm \cdot 3.2μm \cdot 3.9F) + (5.5μm \cdot 2.5F)

Next Step Convert Units

∴

C gs = (\frac{2}{3} \cdot 5.5E-6m \cdot 3.2E-6m \cdot 3.9F) + (5.5E-6m \cdot 2.5F)

Next Step Prepare to Evaluate

∴

C gs = (\frac{2}{3} \cdot 5.5E-6 \cdot 3.2E-6 \cdot 3.9) + (5.5E-6 \cdot 2.5)

Next Step Evaluate

∴

C gs = 1.375004576E-05F

Next Step Convert to Output's Unit

∴

C gs = 13.75004576μF

LAST Step Rounding Answer

∴

C gs = 13.75μF

Gate Source Capacitance Given Overlap Capacitance Formula Elements

Variables

Gate Source Capacitance

Gate Source Capacitance refers to the capacitance between the gate and source terminals of a field-effect transistor (FET).

Symbol: C_gs

Measurement: CapacitanceUnit: μF

Note: Value should be greater than 0.

Formulas to find Gate Source Capacitance

Transistor's Width

Transistor's Width refers to the width of the channel region in a MOSFET. This dimension plays a crucial role in determining the electrical characteristics and performance of the transistor.

Symbol: W_t

Measurement: LengthUnit: μm

Note: Value should be greater than 0.

Formulas to find Transistor's Width

Transistor's Length

Transistor's Length refers to the length of the channel region in a MOSFET. This dimension plays a crucial role in determining the electrical characteristics and performance of the transistor.

Symbol: L_t

Measurement: LengthUnit: μm

Note: Value should be greater than 0.

Formulas to find Transistor's Length

Oxide Capacitance

Oxide Capacitance refers to the capacitance associated with the insulating oxide layer in a Metal-Oxide-Semiconductor (MOS) structure, such as in MOSFETs.

Symbol: C_ox

Measurement: CapacitanceUnit: F

Note: Value should be greater than 0.

Formulas to find Oxide Capacitance

Overlap Capacitance

Overlap Capacitance is a parasitic capacitance that arises due to the physical overlap between the gate and the source/drain regions.

Symbol: C_ov

Measurement: CapacitanceUnit: F

Note: Value should be greater than 0.

Formulas to find Overlap Capacitance

Other formulas in Bipolar IC Fabrication category

Go Impurity with Intrinsic Concentration

n i = \sqrt{\frac{n e \cdot p}{t o}}

Go Ohmic Conductivity of Impurity

σ = q \cdot (μ n \cdot n e + μ p \cdot p)

Go Breakout Voltage of Collector Emitter

V ce = \frac{V cb}{{(i g)}^{\frac{1}{n}}}

Go Conductivity of N-Type

σ = q \cdot (μ n \cdot N d + μ p \cdot (\frac{{n i}^{2}}{N d}))

How to Evaluate Gate Source Capacitance Given Overlap Capacitance?

Gate Source Capacitance Given Overlap Capacitance evaluator uses Gate Source Capacitance = (2/3*Transistor's Width*Transistor's Length*Oxide Capacitance)+(Transistor's Width*Overlap Capacitance) to evaluate the Gate Source Capacitance, The Gate Source Capacitance Given Overlap Capacitance formula is defined as the capacitance between the gate and source terminals. Gate Source Capacitance is denoted by C_gs symbol.

How to evaluate Gate Source Capacitance Given Overlap Capacitance using this online evaluator? To use this online evaluator for Gate Source Capacitance Given Overlap Capacitance, enter Transistor's Width (W_t), Transistor's Length (L_t), Oxide Capacitance (C_ox) & Overlap Capacitance (C_ov) and hit the calculate button.

FAQs on Gate Source Capacitance Given Overlap Capacitance

What is the formula to find Gate Source Capacitance Given Overlap Capacitance?

The formula of Gate Source Capacitance Given Overlap Capacitance is expressed as Gate Source Capacitance = (2/3*Transistor's Width*Transistor's Length*Oxide Capacitance)+(Transistor's Width*Overlap Capacitance). Here is an example- 1.4E-5 = (2/3*5.5E-06*3.2E-06*3.9)+(5.5E-06*2.5).

How to calculate Gate Source Capacitance Given Overlap Capacitance?

With Transistor's Width (W_t), Transistor's Length (L_t), Oxide Capacitance (C_ox) & Overlap Capacitance (C_ov) we can find Gate Source Capacitance Given Overlap Capacitance using the formula - Gate Source Capacitance = (2/3*Transistor's Width*Transistor's Length*Oxide Capacitance)+(Transistor's Width*Overlap Capacitance).

Can the Gate Source Capacitance Given Overlap Capacitance be negative?

No, the Gate Source Capacitance Given Overlap Capacitance, measured in Capacitance cannot be negative.

Which unit is used to measure Gate Source Capacitance Given Overlap Capacitance?

Gate Source Capacitance Given Overlap Capacitance is usually measured using the Microfarad[μF] for Capacitance. Farad[μF], Kilofarad[μF], Millifarad[μF] are the few other units in which Gate Source Capacitance Given Overlap Capacitance can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Gate Source Capacitance Given Overlap Capacitance Formula

Gate Source Capacitance Given Overlap Capacitance Example

Gate Source Capacitance Given Overlap Capacitance Solution

Gate Source Capacitance Given Overlap Capacitance Formula Elements

Other formulas in Bipolar IC Fabrication category

How to Evaluate Gate Source Capacitance Given Overlap Capacitance?

FAQs on Gate Source Capacitance Given Overlap Capacitance

Variable Name