FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Feed given Roughness Value and corner radius Formula

GoFeed given Roughness value Formula

Fx Copy

LaTeX Copy

The Feed is the distance as the cutting tool advances along the length of the work for every revolution of the spindle. Check FAQs

f = {(R \cdot \frac{r c}{0.0321})}^{\frac{1}{2}}

f - Feed?R - Roughness Value?r_c - Corner Radius of Tool?

Feed given Roughness Value and corner radius Example

With values

With units

Only example

Here is how the Feed given Roughness Value and corner radius equation looks like with Values.

Here is how the Feed given Roughness Value and corner radius equation looks like with Units.

Here is how the Feed given Roughness Value and corner radius equation looks like.

0.9 = {(0.0171 \cdot \frac{1.5235}{0.0321})}^{\frac{1}{2}}

0.9mm = {(0.0171mm \cdot \frac{1.5235mm}{0.0321})}^{\frac{1}{2}}

0.9 = {(0.0171 \cdot \frac{1.5235}{0.0321})}^{\frac{1}{2}}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Production Engineering » Category

Metal Machining » fx Feed given Roughness Value and corner radius

Feed given Roughness Value and corner radius Solution

Follow our step by step solution on how to calculate Feed given Roughness Value and corner radius?

FIRST Step Consider the formula

f = {(R \cdot \frac{r c}{0.0321})}^{\frac{1}{2}}

Next Step Substitute values of Variables

∴

f = {(0.0171mm \cdot \frac{1.5235mm}{0.0321})}^{\frac{1}{2}}

Next Step Convert Units

∴

f = {(1.7E-5m \cdot \frac{0.0015m}{0.0321})}^{\frac{1}{2}}

Next Step Prepare to Evaluate

∴

f = {(1.7E-5 \cdot \frac{0.0015}{0.0321})}^{\frac{1}{2}}

Next Step Evaluate

∴

f = 0.000899999899999995m

Next Step Convert to Output's Unit

∴

f = 0.899999899999995mm

LAST Step Rounding Answer

∴

f = 0.9mm

Feed given Roughness Value and corner radius Formula Elements

Variables

Feed

The Feed is the distance as the cutting tool advances along the length of the work for every revolution of the spindle.

Symbol: f

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Feed

Roughness Value

Roughness Value is the arithmetic average of the absolute values of the roughness profile ordinates.

Symbol: R

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Roughness Value

Corner Radius of Tool

The Corner Radius of Tool is a measurement describing the curve on the corners of labels.

Symbol: r_c

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Corner Radius of Tool

Other Formulas to find Feed

Go Feed given Roughness value

f = 4 \cdot (\cot (θ) + \cot (θ')) \cdot R

Other formulas in Cutting Force and Surface Roughness category

Go Cutting Force given Rate of Energy Consumption during Machining

F c = \frac{Q c}{V c}

Go Cutting Force given Specific Cutting Energy in Machining

F c = Q sc \cdot A cs

Go Force required to remove Chip and Acting on Tool Face

F r = F rc - F p

Go Resultant Cutting Force using Force required to remove Chip

F rc = F r + F p

How to Evaluate Feed given Roughness Value and corner radius?

Feed given Roughness Value and corner radius evaluator uses Feed = (Roughness Value*Corner Radius of Tool/0.0321)^(1/2) to evaluate the Feed, The Feed given Roughness Value and Corner Radius formula is used to find the distance that the cutting tool advances along the length of the work for every revolution of the spindle. Feed is denoted by f symbol.

How to evaluate Feed given Roughness Value and corner radius using this online evaluator? To use this online evaluator for Feed given Roughness Value and corner radius, enter Roughness Value (R) & Corner Radius of Tool (r_c) and hit the calculate button.

FAQs on Feed given Roughness Value and corner radius

What is the formula to find Feed given Roughness Value and corner radius?

The formula of Feed given Roughness Value and corner radius is expressed as Feed = (Roughness Value*Corner Radius of Tool/0.0321)^(1/2). Here is an example- 893.0416 = (1.7067E-05*0.001523466/0.0321)^(1/2).

How to calculate Feed given Roughness Value and corner radius?

With Roughness Value (R) & Corner Radius of Tool (r_c) we can find Feed given Roughness Value and corner radius using the formula - Feed = (Roughness Value*Corner Radius of Tool/0.0321)^(1/2).

What are the other ways to Calculate Feed?

Here are the different ways to Calculate Feed-

Feed=4*(cot(Working Major Cutting Edge Angle)+cot(Working Minor Cutting Edge))*Roughness Value

Can the Feed given Roughness Value and corner radius be negative?

No, the Feed given Roughness Value and corner radius, measured in Length cannot be negative.

Which unit is used to measure Feed given Roughness Value and corner radius?

Feed given Roughness Value and corner radius is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Feed given Roughness Value and corner radius can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Feed given Roughness Value and corner radius Formula

​GoFeed given Roughness value Formula

Feed given Roughness Value and corner radius Example

Feed given Roughness Value and corner radius Solution

Feed given Roughness Value and corner radius Formula Elements

Other Formulas to find Feed

Other formulas in Cutting Force and Surface Roughness category

How to Evaluate Feed given Roughness Value and corner radius?

FAQs on Feed given Roughness Value and corner radius

Variable Name

GoFeed given Roughness value Formula