FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Feed given Instantaneous Radius for Cut Formula

Fx Copy

LaTeX Copy

The Feed is the distance the cutting tool advances along the length of the work for every revolution of the spindle. Check FAQs

f = \frac{r o - r}{ω s \cdot t′}

f - Feed?r_o - Outside Radius of The Workpiece?r - Instantaneous Radius For Cut?ω_s - Rotational Frequency of Spindle?t′ - Process Time?

Feed given Instantaneous Radius for Cut Example

With values

With units

Only example

Here is how the Feed given Instantaneous Radius for Cut equation looks like with Values.

Here is how the Feed given Instantaneous Radius for Cut equation looks like with Units.

Here is how the Feed given Instantaneous Radius for Cut equation looks like.

0.9 = \frac{984 - 120}{10 \cdot 1.6}

0.9mm = \frac{984mm - 120mm}{10Hz \cdot 1.6min}

0.9 = \frac{984 - 120}{10 \cdot 1.6}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Production Engineering » Category

Metal Machining » fx Feed given Instantaneous Radius for Cut

Feed given Instantaneous Radius for Cut Solution

Follow our step by step solution on how to calculate Feed given Instantaneous Radius for Cut?

FIRST Step Consider the formula

f = \frac{r o - r}{ω s \cdot t′}

Next Step Substitute values of Variables

∴

f = \frac{984mm - 120mm}{10Hz \cdot 1.6min}

Next Step Convert Units

∴

f = \frac{0.984m - 0.12m}{10Hz \cdot 96s}

Next Step Prepare to Evaluate

∴

f = \frac{0.984 - 0.12}{10 \cdot 96}

Next Step Evaluate

∴

f = 0.0009m

LAST Step Convert to Output's Unit

∴

f = 0.9mm

Feed given Instantaneous Radius for Cut Formula Elements

Variables

Feed

The Feed is the distance the cutting tool advances along the length of the work for every revolution of the spindle.

Symbol: f

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Feed

Outside Radius of The Workpiece

Outside Radius of the Workpiece is the radius of the outermost surface of the workpiece, away from the machining tool.

Symbol: r_o

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Outside Radius of The Workpiece

Instantaneous Radius For Cut

Instantaneous Radius for Cut is the radius of the workpiece surface currently being machined.

Symbol: r

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Instantaneous Radius For Cut

Rotational Frequency of Spindle

Rotational Frequency of Spindle is the number of turns made by the spindle of the Machine for cutting in one second.

Symbol: ω_s

Measurement: FrequencyUnit: Hz

Note: Value should be greater than 0.

Formulas to find Rotational Frequency of Spindle

Process Time

Process Time is the time for which any process has been carried out irrespective of its completion.

Symbol: t′

Measurement: TimeUnit: min

Note: Value should be greater than 0.

Formulas to find Process Time

Other formulas in Instantaneous Radius category

Go Instantaneous Radius for Cut given Cutting Speed

r = \frac{V}{2 \cdot π \cdot ω s}

Go Instantaneous Radius for Cut given Rate of Increase of Wear-Land

r = \frac{V ref \cdot {(W r \cdot \frac{L ref}{W max})}^{n}}{2 \cdot π \cdot ω s}

Go Instantaneous Radius for Cut

r = r o - ω s \cdot f \cdot t′

Go Workpiece Radius Ratio

R w = \frac{r i}{r o}

How to Evaluate Feed given Instantaneous Radius for Cut?

Feed given Instantaneous Radius for Cut evaluator uses Feed = (Outside Radius of The Workpiece-Instantaneous Radius For Cut)/(Rotational Frequency of Spindle*Process Time) to evaluate the Feed, The Feed given Instantaneous Radius for Cut is given formula is a method to determine the feed to be given for a Machining Tool working under a given Cutting Radius of Workpiece. Feed is denoted by f symbol.

How to evaluate Feed given Instantaneous Radius for Cut using this online evaluator? To use this online evaluator for Feed given Instantaneous Radius for Cut, enter Outside Radius of The Workpiece (r_o), Instantaneous Radius For Cut (r), Rotational Frequency of Spindle (ω_s) & Process Time (t′) and hit the calculate button.

FAQs on Feed given Instantaneous Radius for Cut

What is the formula to find Feed given Instantaneous Radius for Cut?

The formula of Feed given Instantaneous Radius for Cut is expressed as Feed = (Outside Radius of The Workpiece-Instantaneous Radius For Cut)/(Rotational Frequency of Spindle*Process Time). Here is an example- 883.333 = (0.984-0.12)/(10*96).

How to calculate Feed given Instantaneous Radius for Cut?

With Outside Radius of The Workpiece (r_o), Instantaneous Radius For Cut (r), Rotational Frequency of Spindle (ω_s) & Process Time (t′) we can find Feed given Instantaneous Radius for Cut using the formula - Feed = (Outside Radius of The Workpiece-Instantaneous Radius For Cut)/(Rotational Frequency of Spindle*Process Time).

Can the Feed given Instantaneous Radius for Cut be negative?

No, the Feed given Instantaneous Radius for Cut, measured in Length cannot be negative.

Which unit is used to measure Feed given Instantaneous Radius for Cut?

Feed given Instantaneous Radius for Cut is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Feed given Instantaneous Radius for Cut can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Feed given Instantaneous Radius for Cut Formula

Feed given Instantaneous Radius for Cut Example

Feed given Instantaneous Radius for Cut Solution

Feed given Instantaneous Radius for Cut Formula Elements

Other formulas in Instantaneous Radius category

How to Evaluate Feed given Instantaneous Radius for Cut?

FAQs on Feed given Instantaneous Radius for Cut

Variable Name