FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Feed given Constant for Cylindrical Turning Formula

Fx Copy

LaTeX Copy

The Feed is the distance the cutting tool advances along the length of the workpiece. Check FAQs

f = π \cdot d \cdot \frac{L cut}{K}

f - Feed?d - Diameter of Workpiece?L_cut - Length of Cut?K - Constant For Machining Condition?π - Archimedes' constant?

Feed given Constant for Cylindrical Turning Example

With values

With units

Only example

Here is how the Feed given Constant for Cylindrical Turning equation looks like with Values.

Here is how the Feed given Constant for Cylindrical Turning equation looks like with Units.

Here is how the Feed given Constant for Cylindrical Turning equation looks like.

0.9 = 3.1416 \cdot 76.2 \cdot \frac{9}{2393.894}

0.9mm = 3.1416 \cdot 76.2mm \cdot \frac{9mm}{2393.894mm}

0.9 = 3.1416 \cdot 76.2 \cdot \frac{9}{2393.894}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Production Engineering » Category

Metal Machining » fx Feed given Constant for Cylindrical Turning

Feed given Constant for Cylindrical Turning Solution

Follow our step by step solution on how to calculate Feed given Constant for Cylindrical Turning?

FIRST Step Consider the formula

f = π \cdot d \cdot \frac{L cut}{K}

Next Step Substitute values of Variables

∴

f = π \cdot 76.2mm \cdot \frac{9mm}{2393.894mm}

Next Step Substitute values of Constants

∴

f = 3.1416 \cdot 76.2mm \cdot \frac{9mm}{2393.894mm}

Next Step Convert Units

∴

f = 3.1416 \cdot 0.0762m \cdot \frac{0.009m}{2.3939m}

Next Step Prepare to Evaluate

∴

f = 3.1416 \cdot 0.0762 \cdot \frac{0.009}{2.3939}

Next Step Evaluate

∴

f = 0.000899999850382632m

Next Step Convert to Output's Unit

∴

f = 0.899999850382632mm

LAST Step Rounding Answer

∴

f = 0.9mm

Feed given Constant for Cylindrical Turning Formula Elements

Variables

Constants

Feed

The Feed is the distance the cutting tool advances along the length of the workpiece.

Symbol: f

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Feed

Diameter of Workpiece

The Diameter of Workpiece is the length of the largest cord perpendicular to its axis of the workpiece which is undergoing the operation.

Symbol: d

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Diameter of Workpiece

Length of Cut

Length of Cut (LOC) is a measurement of the functional cutting depth in the axial direction for a machining process.

Symbol: L_cut

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Length of Cut

Constant For Machining Condition

Constant For Machining Condition can be regarded as the distance moved by the tool corner relative to the workpiece during a particular machining condition.

Symbol: K

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Constant For Machining Condition

Archimedes' constant

Archimedes' constant is a mathematical constant that represents the ratio of the circumference of a circle to its diameter.

Symbol: π

Value: 3.14159265358979323846264338327950288

Other formulas in Turning Operation category

Go Diameter of Workpiece given Constant for Cylindrical Turning

d = K \cdot \frac{f}{π \cdot L cut}

Go Turning Length given Constant for Cylindrical Turning

L cut = K \cdot \frac{f}{π \cdot d}

Go Constant for given Cylindrical Turning

K = π \cdot d \cdot \frac{L cut}{f}

Go Non-Productive Time in Turning

NPT = (\frac{t s + N t \cdot t st}{N b}) + t ln + (t pt \cdot n 0)

How to Evaluate Feed given Constant for Cylindrical Turning?

Feed given Constant for Cylindrical Turning evaluator uses Feed = pi*Diameter of Workpiece*Length of Cut/Constant For Machining Condition to evaluate the Feed, The Feed given Constant for Cylindrical Turning is a method to determine the maximum Feed that can be given to workpiece when Constant for Cylindrical Turning is bounded. Feed is denoted by f symbol.

How to evaluate Feed given Constant for Cylindrical Turning using this online evaluator? To use this online evaluator for Feed given Constant for Cylindrical Turning, enter Diameter of Workpiece (d), Length of Cut (L_cut) & Constant For Machining Condition (K) and hit the calculate button.

FAQs on Feed given Constant for Cylindrical Turning

What is the formula to find Feed given Constant for Cylindrical Turning?

The formula of Feed given Constant for Cylindrical Turning is expressed as Feed = pi*Diameter of Workpiece*Length of Cut/Constant For Machining Condition. Here is an example- 899.9999 = pi*0.0762*0.009/2.393894.

How to calculate Feed given Constant for Cylindrical Turning?

With Diameter of Workpiece (d), Length of Cut (L_cut) & Constant For Machining Condition (K) we can find Feed given Constant for Cylindrical Turning using the formula - Feed = pi*Diameter of Workpiece*Length of Cut/Constant For Machining Condition. This formula also uses Archimedes' constant .

Can the Feed given Constant for Cylindrical Turning be negative?

No, the Feed given Constant for Cylindrical Turning, measured in Length cannot be negative.

Which unit is used to measure Feed given Constant for Cylindrical Turning?

Feed given Constant for Cylindrical Turning is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Feed given Constant for Cylindrical Turning can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Feed given Constant for Cylindrical Turning Formula

Feed given Constant for Cylindrical Turning Example

Feed given Constant for Cylindrical Turning Solution

Feed given Constant for Cylindrical Turning Formula Elements

Other formulas in Turning Operation category

How to Evaluate Feed given Constant for Cylindrical Turning?

FAQs on Feed given Constant for Cylindrical Turning

Variable Name