FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Feed for Sintered-Carbide Tools using Crater Depth Formula

Fx Copy

LaTeX Copy

Feed Rate in Cutting Velocity is defined as the tool's distance travelled during one spindle revolution. Check FAQs

f r = \frac{K t - 0.06}{0.3}

f_r - Feed Rate in Cutting Velocity?K_t - Tool Wear Crater Depth?

Feed for Sintered-Carbide Tools using Crater Depth Example

With values

With units

Only example

Here is how the Feed for Sintered-Carbide Tools using Crater Depth equation looks like with Values.

Here is how the Feed for Sintered-Carbide Tools using Crater Depth equation looks like with Units.

Here is how the Feed for Sintered-Carbide Tools using Crater Depth equation looks like.

0.7 = \frac{0.0602 - 0.06}{0.3}

0.7mm/rev = \frac{0.0602m - 0.06}{0.3}

0.7 = \frac{0.0602 - 0.06}{0.3}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Production Engineering » Category

Metal Machining » fx Feed for Sintered-Carbide Tools using Crater Depth

Feed for Sintered-Carbide Tools using Crater Depth Solution

Follow our step by step solution on how to calculate Feed for Sintered-Carbide Tools using Crater Depth?

FIRST Step Consider the formula

f r = \frac{K t - 0.06}{0.3}

Next Step Substitute values of Variables

∴

f r = \frac{0.0602m - 0.06}{0.3}

Next Step Prepare to Evaluate

∴

f r = \frac{0.0602 - 0.06}{0.3}

Next Step Evaluate

∴

f r = 0.000700000000000006m/rev

Next Step Convert to Output's Unit

∴

f r = 0.700000000000006mm/rev

LAST Step Rounding Answer

∴

f r = 0.7mm/rev

Feed for Sintered-Carbide Tools using Crater Depth Formula Elements

Variables

Feed Rate in Cutting Velocity

Feed Rate in Cutting Velocity is defined as the tool's distance travelled during one spindle revolution.

Symbol: f_r

Measurement: FeedUnit: mm/rev

Note: Value should be greater than 0.

Formulas to find Feed Rate in Cutting Velocity

Tool Wear Crater Depth

Tool Wear Crater Depth is the wear that happens on tool surface in which contact with chips erodes the rake face.

Symbol: K_t

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Tool Wear Crater Depth

Other formulas in Cutting Velocity category

Go Resultant Cutting Velocity

V r = \frac{v c}{\cos ((η))}

Go Crater Depth for Sintered-Carbide Tools

K t = 0.06 + 0.3 \cdot f r

Go Cutting Velocity using Taylor's Tool Life and Intercept

V' cut = \frac{X}{{T v}^{x}}

Go Taylor's Intercept given Cutting Velocity and Taylor's Tool Life

X = V' cut \cdot ({T v}^{x})

How to Evaluate Feed for Sintered-Carbide Tools using Crater Depth?

Feed for Sintered-Carbide Tools using Crater Depth evaluator uses Feed Rate in Cutting Velocity = (Tool Wear Crater Depth-0.06)/0.3 to evaluate the Feed Rate in Cutting Velocity, The Feed for Sintered-Carbide Tools using Crater Depth is a method to determine the maximum Feed that can be given to the Workpiece when the tolerance for Cratering of the tool is known. Feed Rate in Cutting Velocity is denoted by f_r symbol.

How to evaluate Feed for Sintered-Carbide Tools using Crater Depth using this online evaluator? To use this online evaluator for Feed for Sintered-Carbide Tools using Crater Depth, enter Tool Wear Crater Depth (K_t) and hit the calculate button.

FAQs on Feed for Sintered-Carbide Tools using Crater Depth

What is the formula to find Feed for Sintered-Carbide Tools using Crater Depth?

The formula of Feed for Sintered-Carbide Tools using Crater Depth is expressed as Feed Rate in Cutting Velocity = (Tool Wear Crater Depth-0.06)/0.3. Here is an example- 700 = (0.06021-0.06)/0.3.

How to calculate Feed for Sintered-Carbide Tools using Crater Depth?

With Tool Wear Crater Depth (K_t) we can find Feed for Sintered-Carbide Tools using Crater Depth using the formula - Feed Rate in Cutting Velocity = (Tool Wear Crater Depth-0.06)/0.3.

Can the Feed for Sintered-Carbide Tools using Crater Depth be negative?

No, the Feed for Sintered-Carbide Tools using Crater Depth, measured in Feed cannot be negative.

Which unit is used to measure Feed for Sintered-Carbide Tools using Crater Depth?

Feed for Sintered-Carbide Tools using Crater Depth is usually measured using the Millimeter Per Revolution[mm/rev] for Feed. Meter Per Revolution[mm/rev] are the few other units in which Feed for Sintered-Carbide Tools using Crater Depth can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!