FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Elongation in Pipes given Change in Temperature Formula

Fx Copy

LaTeX Copy

The Elongation refers to the change in length due to subjected load. Check FAQs

∆ = L 0 \cdot α \cdot ∆T

∆ - Elongation?L₀ - Original Length?α - Thermal Expansion Coefficient?∆T - Change in Temperature?

Elongation in Pipes given Change in Temperature Example

With values

With units

Only example

Here is how the Elongation in Pipes given Change in Temperature equation looks like with Values.

Here is how the Elongation in Pipes given Change in Temperature equation looks like with Units.

Here is how the Elongation in Pipes given Change in Temperature equation looks like.

0.375 = 5000 \cdot 1.5E-6 \cdot 50

0.375mm = 5000mm \cdot 1.5E-6K⁻¹ \cdot 50K

0.375 = 5000 \cdot 1.5E-6 \cdot 50

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Environmental Engineering » fx Elongation in Pipes given Change in Temperature

Elongation in Pipes given Change in Temperature Solution

Follow our step by step solution on how to calculate Elongation in Pipes given Change in Temperature?

FIRST Step Consider the formula

∆ = L 0 \cdot α \cdot ∆T

Next Step Substitute values of Variables

∴

∆ = 5000mm \cdot 1.5E-6K⁻¹ \cdot 50K

Next Step Convert Units

∴

∆ = 5m \cdot 1.5E-6K⁻¹ \cdot 50K

Next Step Prepare to Evaluate

∴

∆ = 5 \cdot 1.5E-6 \cdot 50

Next Step Evaluate

∴

∆ = 0.000375m

LAST Step Convert to Output's Unit

∴

∆ = 0.375mm

Elongation in Pipes given Change in Temperature Formula Elements

Variables

Elongation

The Elongation refers to the change in length due to subjected load.

Symbol: ∆

Measurement: LengthUnit: mm

Note: Value can be positive or negative.

Formulas to find Elongation

Original Length

The Original Length refers to the material refers to its initial size or dimension before any external forces are applied.

Symbol: L₀

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Original Length

Thermal Expansion Coefficient

Thermal Expansion Coefficient is a material property that is indicative of the extent to which a material expands upon heating.

Symbol: α

Measurement: Thermal ExpansionUnit: K⁻¹

Note: Value can be positive or negative.

Formulas to find Thermal Expansion Coefficient

Change in Temperature

The Change in Temperature refers to the difference between the initial and final temperature.

Symbol: ∆T

Measurement: Temperature DifferenceUnit: K

Note: Value can be positive or negative.

Formulas to find Change in Temperature

Other formulas in Pressure Due to External Loads category

Go Load Per Unit Length for Pipes Resting on Undisturbed Ground on Cohesion Less Soil

W = C p \cdot γ \cdot {(D)}^{2}

Go Pipe Coefficient given Load Per Unit Length for Pipes

C p = (\frac{W}{γ \cdot {(D)}^{2}})

Go Specific Weight of Fill Material given Load Per Unit Length for Pipes

γ = \frac{W}{C p \cdot {(D)}^{2}}

Go External Diameter of Pipe given Load Per Unit Length for Pipes

D = \sqrt{\frac{W}{C p \cdot γ}}

How to Evaluate Elongation in Pipes given Change in Temperature?

Elongation in Pipes given Change in Temperature evaluator uses Elongation = Original Length*Thermal Expansion Coefficient*Change in Temperature to evaluate the Elongation, The Elongation in Pipes given Change in Temperature is defined as the state of being elongated or lengthened also : the process of growing or increasing in length chain. Elongation is denoted by ∆ symbol.

How to evaluate Elongation in Pipes given Change in Temperature using this online evaluator? To use this online evaluator for Elongation in Pipes given Change in Temperature, enter Original Length (L₀), Thermal Expansion Coefficient (α) & Change in Temperature (∆T) and hit the calculate button.

FAQs on Elongation in Pipes given Change in Temperature

What is the formula to find Elongation in Pipes given Change in Temperature?

The formula of Elongation in Pipes given Change in Temperature is expressed as Elongation = Original Length*Thermal Expansion Coefficient*Change in Temperature. Here is an example- 375 = 5*1.5E-06*50.

How to calculate Elongation in Pipes given Change in Temperature?

With Original Length (L₀), Thermal Expansion Coefficient (α) & Change in Temperature (∆T) we can find Elongation in Pipes given Change in Temperature using the formula - Elongation = Original Length*Thermal Expansion Coefficient*Change in Temperature.

Can the Elongation in Pipes given Change in Temperature be negative?

Yes, the Elongation in Pipes given Change in Temperature, measured in Length can be negative.

Which unit is used to measure Elongation in Pipes given Change in Temperature?

Elongation in Pipes given Change in Temperature is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Elongation in Pipes given Change in Temperature can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Elongation in Pipes given Change in Temperature Formula

Elongation in Pipes given Change in Temperature Example

Elongation in Pipes given Change in Temperature Solution

Elongation in Pipes given Change in Temperature Formula Elements

Other formulas in Pressure Due to External Loads category

How to Evaluate Elongation in Pipes given Change in Temperature?

FAQs on Elongation in Pipes given Change in Temperature

Variable Name