FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Effort Required in Lowering Load with Trapezoidal Threaded Screw Formula

Fx Copy

LaTeX Copy

Effort in lowering load is the force required to overcome the resistance to lower the load. Check FAQs

P lo = W \cdot (\frac{μ \cdot \sec ((0.2618)) - \tan (α)}{1 + μ \cdot \sec ((0.2618)) \cdot \tan (α)})

P_lo - Effort in lowering load?W - Load on screw?μ - Coefficient of friction at screw thread?α - Helix angle of screw?

Effort Required in Lowering Load with Trapezoidal Threaded Screw Example

With values

With units

Only example

Here is how the Effort Required in Lowering Load with Trapezoidal Threaded Screw equation looks like with Values.

Here is how the Effort Required in Lowering Load with Trapezoidal Threaded Screw equation looks like with Units.

Here is how the Effort Required in Lowering Load with Trapezoidal Threaded Screw equation looks like.

128.6305 = 1700 \cdot (\frac{0.15 \cdot \sec ((0.2618)) - \tan (4.5)}{1 + 0.15 \cdot \sec ((0.2618)) \cdot \tan (4.5)})

128.6305N = 1700N \cdot (\frac{0.15 \cdot \sec ((0.2618)) - \tan (4.5°)}{1 + 0.15 \cdot \sec ((0.2618)) \cdot \tan (4.5°)})

128.6305 = 1700 \cdot (\frac{0.15 \cdot \sec ((0.2618)) - \tan (4.5)}{1 + 0.15 \cdot \sec ((0.2618)) \cdot \tan (4.5)})

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Mechanical » Category

Machine Design » fx Effort Required in Lowering Load with Trapezoidal Threaded Screw

Effort Required in Lowering Load with Trapezoidal Threaded Screw Solution

Follow our step by step solution on how to calculate Effort Required in Lowering Load with Trapezoidal Threaded Screw?

FIRST Step Consider the formula

P lo = W \cdot (\frac{μ \cdot \sec ((0.2618)) - \tan (α)}{1 + μ \cdot \sec ((0.2618)) \cdot \tan (α)})

Next Step Substitute values of Variables

∴

P lo = 1700N \cdot (\frac{0.15 \cdot \sec ((0.2618)) - \tan (4.5°)}{1 + 0.15 \cdot \sec ((0.2618)) \cdot \tan (4.5°)})

Next Step Convert Units

∴

P lo = 1700N \cdot (\frac{0.15 \cdot \sec ((0.2618)) - \tan (0.0785rad)}{1 + 0.15 \cdot \sec ((0.2618)) \cdot \tan (0.0785rad)})

Next Step Prepare to Evaluate

∴

P lo = 1700 \cdot (\frac{0.15 \cdot \sec ((0.2618)) - \tan (0.0785)}{1 + 0.15 \cdot \sec ((0.2618)) \cdot \tan (0.0785)})

Next Step Evaluate

∴

P lo = 128.630484214521N

LAST Step Rounding Answer

∴

P lo = 128.6305N

Effort Required in Lowering Load with Trapezoidal Threaded Screw Formula Elements

Variables

Functions

Effort in lowering load

Effort in lowering load is the force required to overcome the resistance to lower the load.

Symbol: P_lo

Measurement: ForceUnit: N

Note: Value should be greater than 0.

Formulas to find Effort in lowering load

Load on screw

Load on screw is defined as the weight (force) of the body that is acted upon the screw threads.

Symbol: W

Measurement: ForceUnit: N

Note: Value should be greater than 0.

Formulas to find Load on screw

Coefficient of friction at screw thread

Coefficient of friction at screw thread is the ratio defining the force that resists the motion of the nut in relation to the threads in contact with it.

Symbol: μ

Measurement: NAUnit: Unitless

Note: Value should be between 0 to 1.

Formulas to find Coefficient of friction at screw thread

Helix angle of screw

Helix angle of screw is defined as the angle subtended between this unwound circumferential line and the pitch of the helix.

Symbol: α

Measurement: AngleUnit: °

Note: Value should be greater than 0.

Formulas to find Helix angle of screw

tan

The tangent of an angle is a trigonometric ratio of the length of the side opposite an angle to the length of the side adjacent to an angle in a right triangle.

Syntax: tan(Angle)

sec

Secant is a trigonometric function that is defined ratio of the hypotenuse to the shorter side adjacent to an acute angle (in a right-angled triangle); the reciprocal of a cosine.

Syntax: sec(Angle)

Other formulas in Trapezoidal Thread category

Go Effort Required in Lifting Load with Trapezoidal Threaded Screw

P li = W \cdot (\frac{μ \cdot \sec ((0.2618)) + \tan (α)}{1 - μ \cdot \sec ((0.2618)) \cdot \tan (α)})

Go Load on Screw given Effort Required in Lifting Load with Trapezoidal Threaded Screw

W = \frac{P li}{\frac{μ \cdot \sec ((0.2618)) + \tan (α)}{1 - μ \cdot \sec ((0.2618)) \cdot \tan (α)}}

Go Helix Angle of Screw given Effort Required in Lifting Load with Trapezoidal Threaded Screw

α = a \tan (\frac{P li - W \cdot μ \cdot \sec (0.2618)}{W + (P li \cdot μ \cdot \sec (0.2618))})

Go Coefficient of Friction of Screw given Effort for Trapezoidal Threaded Screw

μ = \frac{P li - (W \cdot \tan (α))}{\sec (0.2618) \cdot (W + P li \cdot \tan (α))}

How to Evaluate Effort Required in Lowering Load with Trapezoidal Threaded Screw?

Effort Required in Lowering Load with Trapezoidal Threaded Screw evaluator uses Effort in lowering load = Load on screw*((Coefficient of friction at screw thread*sec((0.2618))-tan(Helix angle of screw))/(1+Coefficient of friction at screw thread*sec((0.2618))*tan(Helix angle of screw))) to evaluate the Effort in lowering load, The Effort Required in Lowering Load with Trapezoidal Threaded Screw formula is defined as the amount of force that is to be applied to lower the load and this force is transmitted as a torque. Effort in lowering load is denoted by P_lo symbol.

How to evaluate Effort Required in Lowering Load with Trapezoidal Threaded Screw using this online evaluator? To use this online evaluator for Effort Required in Lowering Load with Trapezoidal Threaded Screw, enter Load on screw (W), Coefficient of friction at screw thread (μ) & Helix angle of screw (α) and hit the calculate button.

FAQs on Effort Required in Lowering Load with Trapezoidal Threaded Screw

What is the formula to find Effort Required in Lowering Load with Trapezoidal Threaded Screw?

The formula of Effort Required in Lowering Load with Trapezoidal Threaded Screw is expressed as Effort in lowering load = Load on screw*((Coefficient of friction at screw thread*sec((0.2618))-tan(Helix angle of screw))/(1+Coefficient of friction at screw thread*sec((0.2618))*tan(Helix angle of screw))). Here is an example- 128.6305 = 1700*((0.15*sec((0.2618))-tan(0.0785398163397301))/(1+0.15*sec((0.2618))*tan(0.0785398163397301))).

How to calculate Effort Required in Lowering Load with Trapezoidal Threaded Screw?

With Load on screw (W), Coefficient of friction at screw thread (μ) & Helix angle of screw (α) we can find Effort Required in Lowering Load with Trapezoidal Threaded Screw using the formula - Effort in lowering load = Load on screw*((Coefficient of friction at screw thread*sec((0.2618))-tan(Helix angle of screw))/(1+Coefficient of friction at screw thread*sec((0.2618))*tan(Helix angle of screw))). This formula also uses Tangent (tan), Secant (sec) function(s).

Can the Effort Required in Lowering Load with Trapezoidal Threaded Screw be negative?

No, the Effort Required in Lowering Load with Trapezoidal Threaded Screw, measured in Force cannot be negative.

Which unit is used to measure Effort Required in Lowering Load with Trapezoidal Threaded Screw?

Effort Required in Lowering Load with Trapezoidal Threaded Screw is usually measured using the Newton[N] for Force. Exanewton[N], Meganewton[N], Kilonewton[N] are the few other units in which Effort Required in Lowering Load with Trapezoidal Threaded Screw can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Effort Required in Lowering Load with Trapezoidal Threaded Screw Formula

Effort Required in Lowering Load with Trapezoidal Threaded Screw Example

Effort Required in Lowering Load with Trapezoidal Threaded Screw Solution

Effort Required in Lowering Load with Trapezoidal Threaded Screw Formula Elements

Other formulas in Trapezoidal Thread category

How to Evaluate Effort Required in Lowering Load with Trapezoidal Threaded Screw?

FAQs on Effort Required in Lowering Load with Trapezoidal Threaded Screw

Variable Name