FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Eccentricity using Minimum Stress Formula

GoEccentricity using Maximum Stress Formula

GoEccentricity using Bending Stress Formula

Fx Copy

LaTeX Copy

Eccentricity of Loading is the distance between the actual line of action of loads and the line of action that would produce a uniform stress over the cross section of the specimen. Check FAQs

e load = (1 - (σ min \cdot \frac{A sectional}{P})) \cdot (\frac{b}{6})

e_load - Eccentricity of Loading?σ_min - Minimum Stress Value?A_sectional - Column Cross Sectional Area?P - Eccentric Load on Column?b - Width of Column?

Eccentricity using Minimum Stress Example

With values

With units

Only example

Here is how the Eccentricity using Minimum Stress equation looks like with Values.

Here is how the Eccentricity using Minimum Stress equation looks like with Units.

Here is how the Eccentricity using Minimum Stress equation looks like.

80 = (1 - (0.001 \cdot \frac{1.4}{7})) \cdot (\frac{600}{6})

80mm = (1 - (0.001MPa \cdot \frac{1.4m²}{7kN})) \cdot (\frac{600mm}{6})

80 = (1 - (0.001 \cdot \frac{1.4}{7})) \cdot (\frac{600}{6})

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Strength of Materials » fx Eccentricity using Minimum Stress

Eccentricity using Minimum Stress Solution

Follow our step by step solution on how to calculate Eccentricity using Minimum Stress?

FIRST Step Consider the formula

e load = (1 - (σ min \cdot \frac{A sectional}{P})) \cdot (\frac{b}{6})

Next Step Substitute values of Variables

∴

e load = (1 - (0.001MPa \cdot \frac{1.4m²}{7kN})) \cdot (\frac{600mm}{6})

Next Step Convert Units

∴

e load = (1 - (1000Pa \cdot \frac{1.4m²}{7000N})) \cdot (\frac{0.6m}{6})

Next Step Prepare to Evaluate

∴

e load = (1 - (1000 \cdot \frac{1.4}{7000})) \cdot (\frac{0.6}{6})

Next Step Evaluate

∴

e load = 0.08m

LAST Step Convert to Output's Unit

∴

e load = 80mm

Eccentricity using Minimum Stress Formula Elements

Variables

Eccentricity of Loading

Eccentricity of Loading is the distance between the actual line of action of loads and the line of action that would produce a uniform stress over the cross section of the specimen.

Symbol: e_load

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Eccentricity of Loading

Minimum Stress Value

Minimum Stress Value for fluctuating stress is defined as refers to the minimum compressive stress.

Symbol: σ_min

Measurement: PressureUnit: MPa

Note: Value should be greater than 0.

Formulas to find Minimum Stress Value

Column Cross Sectional Area

Column Cross Sectional Area is the area of a two-dimensional shape that is obtained when a three dimensional shape is sliced perpendicular to some specified axis at a point.

Symbol: A_sectional

Measurement: AreaUnit: m²

Note: Value should be greater than 0.

Formulas to find Column Cross Sectional Area

Eccentric Load on Column

Eccentric Load on Column is the load that causes direct stress as well as bending stress.

Symbol: P

Measurement: ForceUnit: kN

Note: Value should be greater than 0.

Formulas to find Eccentric Load on Column

Width of Column

Width of Column is describe that how wide the column is.

Symbol: b

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Width of Column

Other Formulas to find Eccentricity of Loading

Go Eccentricity using Maximum Stress

e load = ((σ max \cdot \frac{A sectional}{P}) - 1) \cdot (\frac{b}{6})

Go Eccentricity using Bending Stress

e load = \frac{σ b \cdot (h \cdot (b^{2}))}{6 \cdot P}

Go Eccentricity for given Moment due to Eccentric Load

e load = \frac{M}{P}

Other formulas in Rectangular Section Is Subjected to Eccentric Load category

Go Eccentric Load using Minimum Stress

P = \frac{σ min \cdot A sectional}{1 - (6 \cdot \frac{e load}{b})}

Go Minimum Stress using Eccentric Load and Eccentricity

σ min = \frac{P \cdot (1 - (6 \cdot \frac{e load}{b}))}{A sectional}

Go Minimum Stress

σ min = (σ - σ b)

Go Eccentric Load using Maximum Stress

P = \frac{σ max \cdot A sectional}{1 + (6 \cdot \frac{e load}{b})}

How to Evaluate Eccentricity using Minimum Stress?

Eccentricity using Minimum Stress evaluator uses Eccentricity of Loading = (1-(Minimum Stress Value*Column Cross Sectional Area/Eccentric Load on Column))*(Width of Column/6) to evaluate the Eccentricity of Loading, Eccentricity using Minimum Stress formula is defined as a measure of how much the neutral axis of a beam is offset from the centroid of the cross-section, which affects the stress distribution and bending behavior of the beam under load. Eccentricity of Loading is denoted by e_load symbol.

How to evaluate Eccentricity using Minimum Stress using this online evaluator? To use this online evaluator for Eccentricity using Minimum Stress, enter Minimum Stress Value (σ_min), Column Cross Sectional Area (A_sectional), Eccentric Load on Column (P) & Width of Column (b) and hit the calculate button.

FAQs on Eccentricity using Minimum Stress

What is the formula to find Eccentricity using Minimum Stress?

The formula of Eccentricity using Minimum Stress is expressed as Eccentricity of Loading = (1-(Minimum Stress Value*Column Cross Sectional Area/Eccentric Load on Column))*(Width of Column/6). Here is an example- 80000 = (1-(1000*1.4/7000))*(0.6/6).

How to calculate Eccentricity using Minimum Stress?

With Minimum Stress Value (σ_min), Column Cross Sectional Area (A_sectional), Eccentric Load on Column (P) & Width of Column (b) we can find Eccentricity using Minimum Stress using the formula - Eccentricity of Loading = (1-(Minimum Stress Value*Column Cross Sectional Area/Eccentric Load on Column))*(Width of Column/6).

What are the other ways to Calculate Eccentricity of Loading?

Here are the different ways to Calculate Eccentricity of Loading-

Eccentricity of Loading=((Maximum Stress on Column Section*Column Cross Sectional Area/Eccentric Load on Column)-1)*(Width of Column/6)
Eccentricity of Loading=(Bending Stress in Column*(Depth of Column*(Width of Column^2)))/(6*Eccentric Load on Column)
Eccentricity of Loading=Moment due to Eccentric Load/Eccentric Load on Column

Can the Eccentricity using Minimum Stress be negative?

No, the Eccentricity using Minimum Stress, measured in Length cannot be negative.

Which unit is used to measure Eccentricity using Minimum Stress?

Eccentricity using Minimum Stress is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Eccentricity using Minimum Stress can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Eccentricity using Minimum Stress Formula

​GoEccentricity using Maximum Stress Formula

​GoEccentricity using Bending Stress Formula

Eccentricity using Minimum Stress Example

Eccentricity using Minimum Stress Solution

Eccentricity using Minimum Stress Formula Elements

Other Formulas to find Eccentricity of Loading

Other formulas in Rectangular Section Is Subjected to Eccentric Load category

How to Evaluate Eccentricity using Minimum Stress?

FAQs on Eccentricity using Minimum Stress

Variable Name

GoEccentricity using Maximum Stress Formula

GoEccentricity using Bending Stress Formula