FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Eccentric Load using Minimum Stress Formula

GoEccentric Load using Maximum Stress Formula

GoEccentric Load using Bending Stress Formula

Fx Copy

LaTeX Copy

Eccentric Load on Column is the load that causes direct stress as well as bending stress. Check FAQs

P = \frac{σ min \cdot A sectional}{1 - (6 \cdot \frac{e load}{b})}

P - Eccentric Load on Column?σ_min - Minimum Stress Value?A_sectional - Column Cross Sectional Area?e_load - Eccentricity of Loading?b - Width of Column?

Eccentric Load using Minimum Stress Example

With values

With units

Only example

Here is how the Eccentric Load using Minimum Stress equation looks like with Values.

Here is how the Eccentric Load using Minimum Stress equation looks like with Units.

Here is how the Eccentric Load using Minimum Stress equation looks like.

1.8667 = \frac{0.001 \cdot 1.4}{1 - (6 \cdot \frac{25}{600})}

1.8667kN = \frac{0.001MPa \cdot 1.4m²}{1 - (6 \cdot \frac{25mm}{600mm})}

1.8667 = \frac{0.001 \cdot 1.4}{1 - (6 \cdot \frac{25}{600})}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Strength of Materials » fx Eccentric Load using Minimum Stress

Eccentric Load using Minimum Stress Solution

Follow our step by step solution on how to calculate Eccentric Load using Minimum Stress?

FIRST Step Consider the formula

P = \frac{σ min \cdot A sectional}{1 - (6 \cdot \frac{e load}{b})}

Next Step Substitute values of Variables

∴

P = \frac{0.001MPa \cdot 1.4m²}{1 - (6 \cdot \frac{25mm}{600mm})}

Next Step Convert Units

∴

P = \frac{1000Pa \cdot 1.4m²}{1 - (6 \cdot \frac{0.025m}{0.6m})}

Next Step Prepare to Evaluate

∴

P = \frac{1000 \cdot 1.4}{1 - (6 \cdot \frac{0.025}{0.6})}

Next Step Evaluate

∴

P = 1866.66666666667N

Next Step Convert to Output's Unit

∴

P = 1.86666666666667kN

LAST Step Rounding Answer

∴

P = 1.8667kN

Eccentric Load using Minimum Stress Formula Elements

Variables

Eccentric Load on Column

Eccentric Load on Column is the load that causes direct stress as well as bending stress.

Symbol: P

Measurement: ForceUnit: kN

Note: Value should be greater than 0.

Formulas to find Eccentric Load on Column

Minimum Stress Value

Minimum Stress Value for fluctuating stress is defined as refers to the minimum compressive stress.

Symbol: σ_min

Measurement: PressureUnit: MPa

Note: Value should be greater than 0.

Formulas to find Minimum Stress Value

Column Cross Sectional Area

Column Cross Sectional Area is the area of a two-dimensional shape that is obtained when a three dimensional shape is sliced perpendicular to some specified axis at a point.

Symbol: A_sectional

Measurement: AreaUnit: m²

Note: Value should be greater than 0.

Formulas to find Column Cross Sectional Area

Eccentricity of Loading

Eccentricity of Loading is the distance between the actual line of action of loads and the line of action that would produce a uniform stress over the cross section of the specimen.

Symbol: e_load

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Eccentricity of Loading

Width of Column

Width of Column is describe that how wide the column is.

Symbol: b

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Width of Column

Other Formulas to find Eccentric Load on Column

Go Eccentric Load using Maximum Stress

P = \frac{σ max \cdot A sectional}{1 + (6 \cdot \frac{e load}{b})}

Go Eccentric Load using Bending Stress

P = \frac{σ b \cdot (h \cdot (b^{2}))}{6 \cdot e load}

Go Load given Moment due to Eccentric Load

P = \frac{M}{e load}

Other formulas in Rectangular Section Is Subjected to Eccentric Load category

Go Eccentricity using Minimum Stress

e load = (1 - (σ min \cdot \frac{A sectional}{P})) \cdot (\frac{b}{6})

Go Minimum Stress using Eccentric Load and Eccentricity

σ min = \frac{P \cdot (1 - (6 \cdot \frac{e load}{b}))}{A sectional}

Go Minimum Stress

σ min = (σ - σ b)

Go Eccentricity using Maximum Stress

e load = ((σ max \cdot \frac{A sectional}{P}) - 1) \cdot (\frac{b}{6})

How to Evaluate Eccentric Load using Minimum Stress?

Eccentric Load using Minimum Stress evaluator uses Eccentric Load on Column = (Minimum Stress Value*Column Cross Sectional Area)/(1-(6*Eccentricity of Loading/Width of Column)) to evaluate the Eccentric Load on Column, The Eccentric Load using Minimum Stress formula is defined as a measure of the load applied to a structural member that causes both compressive and tensile stresses, resulting in bending and deformation of the member, and is critical in determining the structural integrity of a system under various types of loads. Eccentric Load on Column is denoted by P symbol.

How to evaluate Eccentric Load using Minimum Stress using this online evaluator? To use this online evaluator for Eccentric Load using Minimum Stress, enter Minimum Stress Value (σ_min), Column Cross Sectional Area (A_sectional), Eccentricity of Loading (e_load) & Width of Column (b) and hit the calculate button.

FAQs on Eccentric Load using Minimum Stress

What is the formula to find Eccentric Load using Minimum Stress?

The formula of Eccentric Load using Minimum Stress is expressed as Eccentric Load on Column = (Minimum Stress Value*Column Cross Sectional Area)/(1-(6*Eccentricity of Loading/Width of Column)). Here is an example- 0.001867 = (1000*1.4)/(1-(6*0.025/0.6)).

How to calculate Eccentric Load using Minimum Stress?

With Minimum Stress Value (σ_min), Column Cross Sectional Area (A_sectional), Eccentricity of Loading (e_load) & Width of Column (b) we can find Eccentric Load using Minimum Stress using the formula - Eccentric Load on Column = (Minimum Stress Value*Column Cross Sectional Area)/(1-(6*Eccentricity of Loading/Width of Column)).

What are the other ways to Calculate Eccentric Load on Column?

Here are the different ways to Calculate Eccentric Load on Column-

Eccentric Load on Column=(Maximum Stress on Column Section*Column Cross Sectional Area)/(1+(6*Eccentricity of Loading/Width of Column))
Eccentric Load on Column=(Bending Stress in Column*(Depth of Column*(Width of Column^2)))/(6*Eccentricity of Loading)
Eccentric Load on Column=Moment due to Eccentric Load/Eccentricity of Loading

Can the Eccentric Load using Minimum Stress be negative?

No, the Eccentric Load using Minimum Stress, measured in Force cannot be negative.

Which unit is used to measure Eccentric Load using Minimum Stress?

Eccentric Load using Minimum Stress is usually measured using the Kilonewton[kN] for Force. Newton[kN], Exanewton[kN], Meganewton[kN] are the few other units in which Eccentric Load using Minimum Stress can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Eccentric Load using Minimum Stress Formula

​GoEccentric Load using Maximum Stress Formula

​GoEccentric Load using Bending Stress Formula

Eccentric Load using Minimum Stress Example

Eccentric Load using Minimum Stress Solution

Eccentric Load using Minimum Stress Formula Elements

Other Formulas to find Eccentric Load on Column

Other formulas in Rectangular Section Is Subjected to Eccentric Load category

How to Evaluate Eccentric Load using Minimum Stress?

FAQs on Eccentric Load using Minimum Stress

Variable Name

GoEccentric Load using Maximum Stress Formula

GoEccentric Load using Bending Stress Formula