FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Eccentric Load using Bending Stress Formula

GoEccentric Load using Minimum Stress Formula

GoEccentric Load using Maximum Stress Formula

Fx Copy

LaTeX Copy

Eccentric Load on Column is the load that causes direct stress as well as bending stress. Check FAQs

P = \frac{σ b \cdot (h \cdot (b^{2}))}{6 \cdot e load}

P - Eccentric Load on Column?σ_b - Bending Stress in Column?h - Depth of Column?b - Width of Column?e_load - Eccentricity of Loading?

Eccentric Load using Bending Stress Example

With values

With units

Only example

Here is how the Eccentric Load using Bending Stress equation looks like with Values.

Here is how the Eccentric Load using Bending Stress equation looks like with Units.

Here is how the Eccentric Load using Bending Stress equation looks like.

288 = \frac{0.04 \cdot (3000 \cdot (600^{2}))}{6 \cdot 25}

288kN = \frac{0.04MPa \cdot (3000mm \cdot ({600mm}^{2}))}{6 \cdot 25mm}

288 = \frac{0.04 \cdot (3000 \cdot (600^{2}))}{6 \cdot 25}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Strength of Materials » fx Eccentric Load using Bending Stress

Eccentric Load using Bending Stress Solution

Follow our step by step solution on how to calculate Eccentric Load using Bending Stress?

FIRST Step Consider the formula

P = \frac{σ b \cdot (h \cdot (b^{2}))}{6 \cdot e load}

Next Step Substitute values of Variables

∴

P = \frac{0.04MPa \cdot (3000mm \cdot ({600mm}^{2}))}{6 \cdot 25mm}

Next Step Convert Units

∴

P = \frac{40000Pa \cdot (3m \cdot ({0.6m}^{2}))}{6 \cdot 0.025m}

Next Step Prepare to Evaluate

∴

P = \frac{40000 \cdot (3 \cdot ({0.6}^{2}))}{6 \cdot 0.025}

Next Step Evaluate

∴

P = 288000N

LAST Step Convert to Output's Unit

∴

P = 288kN

Eccentric Load using Bending Stress Formula Elements

Variables

Eccentric Load on Column

Eccentric Load on Column is the load that causes direct stress as well as bending stress.

Symbol: P

Measurement: ForceUnit: kN

Note: Value should be greater than 0.

Formulas to find Eccentric Load on Column

Bending Stress in Column

Bending Stress in Column is the normal stress that is induced at a point in a body subjected to loads that cause it to bend.

Symbol: σ_b

Measurement: PressureUnit: MPa

Note: Value should be greater than 0.

Formulas to find Bending Stress in Column

Depth of Column

Depth of Column is the distance from the top or surface to the bottom of something.

Symbol: h

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Depth of Column

Width of Column

Width of Column is describe that how wide the column is.

Symbol: b

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Width of Column

Eccentricity of Loading

Eccentricity of Loading is the distance between the actual line of action of loads and the line of action that would produce a uniform stress over the cross section of the specimen.

Symbol: e_load

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Eccentricity of Loading

Other Formulas to find Eccentric Load on Column

Go Eccentric Load using Minimum Stress

P = \frac{σ min \cdot A sectional}{1 - (6 \cdot \frac{e load}{b})}

Go Eccentric Load using Maximum Stress

P = \frac{σ max \cdot A sectional}{1 + (6 \cdot \frac{e load}{b})}

Go Load given Moment due to Eccentric Load

P = \frac{M}{e load}

Other formulas in Rectangular Section Is Subjected to Eccentric Load category

Go Eccentricity using Minimum Stress

e load = (1 - (σ min \cdot \frac{A sectional}{P})) \cdot (\frac{b}{6})

Go Minimum Stress using Eccentric Load and Eccentricity

σ min = \frac{P \cdot (1 - (6 \cdot \frac{e load}{b}))}{A sectional}

Go Minimum Stress

σ min = (σ - σ b)

Go Eccentricity using Maximum Stress

e load = ((σ max \cdot \frac{A sectional}{P}) - 1) \cdot (\frac{b}{6})

How to Evaluate Eccentric Load using Bending Stress?

Eccentric Load using Bending Stress evaluator uses Eccentric Load on Column = (Bending Stress in Column*(Depth of Column*(Width of Column^2)))/(6*Eccentricity of Loading) to evaluate the Eccentric Load on Column, The Eccentric Load using Bending Stress formula is defined as a measure of the load that causes bending stress on a structural element, taking into account the bending stress, height, and width of the element, as well as the load eccentricity, to determine the maximum allowable load. Eccentric Load on Column is denoted by P symbol.

How to evaluate Eccentric Load using Bending Stress using this online evaluator? To use this online evaluator for Eccentric Load using Bending Stress, enter Bending Stress in Column (σ_b), Depth of Column (h), Width of Column (b) & Eccentricity of Loading (e_load) and hit the calculate button.

FAQs on Eccentric Load using Bending Stress

What is the formula to find Eccentric Load using Bending Stress?

The formula of Eccentric Load using Bending Stress is expressed as Eccentric Load on Column = (Bending Stress in Column*(Depth of Column*(Width of Column^2)))/(6*Eccentricity of Loading). Here is an example- 0.288 = (40000*(3*(0.6^2)))/(6*0.025).

How to calculate Eccentric Load using Bending Stress?

With Bending Stress in Column (σ_b), Depth of Column (h), Width of Column (b) & Eccentricity of Loading (e_load) we can find Eccentric Load using Bending Stress using the formula - Eccentric Load on Column = (Bending Stress in Column*(Depth of Column*(Width of Column^2)))/(6*Eccentricity of Loading).

What are the other ways to Calculate Eccentric Load on Column?

Here are the different ways to Calculate Eccentric Load on Column-

Eccentric Load on Column=(Minimum Stress Value*Column Cross Sectional Area)/(1-(6*Eccentricity of Loading/Width of Column))
Eccentric Load on Column=(Maximum Stress on Column Section*Column Cross Sectional Area)/(1+(6*Eccentricity of Loading/Width of Column))
Eccentric Load on Column=Moment due to Eccentric Load/Eccentricity of Loading

Can the Eccentric Load using Bending Stress be negative?

No, the Eccentric Load using Bending Stress, measured in Force cannot be negative.

Which unit is used to measure Eccentric Load using Bending Stress?

Eccentric Load using Bending Stress is usually measured using the Kilonewton[kN] for Force. Newton[kN], Exanewton[kN], Meganewton[kN] are the few other units in which Eccentric Load using Bending Stress can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Eccentric Load using Bending Stress Formula

​GoEccentric Load using Minimum Stress Formula

​GoEccentric Load using Maximum Stress Formula

Eccentric Load using Bending Stress Example

Eccentric Load using Bending Stress Solution

Eccentric Load using Bending Stress Formula Elements

Other Formulas to find Eccentric Load on Column

Other formulas in Rectangular Section Is Subjected to Eccentric Load category

How to Evaluate Eccentric Load using Bending Stress?

FAQs on Eccentric Load using Bending Stress

Variable Name

GoEccentric Load using Minimum Stress Formula

GoEccentric Load using Maximum Stress Formula