FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Drawdown in Well 1 given Aquifer Constant and Discharge Formula

GoDrawdown in Well 1 given Thickness of Aquifer from Impermeable Layer Formula

GoDrawdown in Well 1 given Aquifer Constant Formula

Fx Copy

LaTeX Copy

Drawdown in Well 1 refers to the reduction in water level caused by pumping in a well. Check FAQs

s 1 = s 2 + (\frac{Q w}{2.72 \cdot T})

s₁ - Drawdown in Well 1?s₂ - Drawdown in Well 2?Q_w - Discharge?T - Aquifer Constant?

Drawdown in Well 1 given Aquifer Constant and Discharge Example

With values

With units

Only example

Here is how the Drawdown in Well 1 given Aquifer Constant and Discharge equation looks like with Values.

Here is how the Drawdown in Well 1 given Aquifer Constant and Discharge equation looks like with Units.

Here is how the Drawdown in Well 1 given Aquifer Constant and Discharge equation looks like.

2.1496 = 2.136 + (\frac{0.911}{2.72 \cdot 24.67})

2.1496m = 2.136m + (\frac{0.911m³/s}{2.72 \cdot 24.67})

2.1496 = 2.136 + (\frac{0.911}{2.72 \cdot 24.67})

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Environmental Engineering » fx Drawdown in Well 1 given Aquifer Constant and Discharge

Drawdown in Well 1 given Aquifer Constant and Discharge Solution

Follow our step by step solution on how to calculate Drawdown in Well 1 given Aquifer Constant and Discharge?

FIRST Step Consider the formula

s 1 = s 2 + (\frac{Q w}{2.72 \cdot T})

Next Step Substitute values of Variables

∴

s 1 = 2.136m + (\frac{0.911m³/s}{2.72 \cdot 24.67})

Next Step Prepare to Evaluate

∴

s 1 = 2.136 + (\frac{0.911}{2.72 \cdot 24.67})

Next Step Evaluate

∴

s 1 = 2.14957626552851m

LAST Step Rounding Answer

∴

s 1 = 2.1496m

Drawdown in Well 1 given Aquifer Constant and Discharge Formula Elements

Variables

Drawdown in Well 1

Drawdown in Well 1 refers to the reduction in water level caused by pumping in a well.

Symbol: s₁

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Drawdown in Well 1

Drawdown in Well 2

Drawdown in Well 2 refers to the reduction in water level caused by pumping in a well.

Symbol: s₂

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Drawdown in Well 2

Discharge

Discharge refers to the volume of water that flows through the aquifer over a given period.

Symbol: Q_w

Measurement: Volumetric Flow RateUnit: m³/s

Note: Value should be greater than 0.

Formulas to find Discharge

Aquifer Constant

Aquifer Constant refers to the product of the hydraulic conductivity (K) and the thickness (b) of an aquifer and also known as coefficient of transmissibility.

Symbol: T

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Aquifer Constant

Other Formulas to find Drawdown in Well 1

Go Drawdown in Well 1 given Thickness of Aquifer from Impermeable Layer

s 1 = H - h 1

Go Drawdown in Well 1 given Aquifer Constant

s 1 = s 2 + (\frac{Q w \cdot \log ((\frac{r 2}{r 1}), 10)}{2.72 \cdot T})

Other formulas in Discharge And Drawdown in Well category

Go Drawdown in Well 2 given Thickness of Aquifer from Impermeable Layer

s 2 = H - h 2

Go Drawdown in Well 2 given Aquifer Constant

s 2 = s 1 - (\frac{Q w \cdot \log ((\frac{r 2}{r 1}), 10)}{2.72 \cdot T})

Go Discharge given Aquifer Constant

Q w = \frac{T}{\frac{1}{2.72 \cdot (s 1 - s 2)}}

Go Drawdown in Well 2 given Aquifer Constant and Discharge

s 2 = s 1 - (\frac{Q w}{2.72 \cdot T})

How to Evaluate Drawdown in Well 1 given Aquifer Constant and Discharge?

Drawdown in Well 1 given Aquifer Constant and Discharge evaluator uses Drawdown in Well 1 = Drawdown in Well 2+((Discharge)/(2.72*Aquifer Constant)) to evaluate the Drawdown in Well 1, Drawdown in Well 1 given Aquifer Constant and Discharge formula is defined as a measure of the decline in water level in a well due to pumping, taking into account the aquifer's properties and the rate of discharge, providing valuable insights into the aquifer's behavior and water availability in confined aquifers. Drawdown in Well 1 is denoted by s₁ symbol.

How to evaluate Drawdown in Well 1 given Aquifer Constant and Discharge using this online evaluator? To use this online evaluator for Drawdown in Well 1 given Aquifer Constant and Discharge, enter Drawdown in Well 2 (s₂), Discharge (Q_w) & Aquifer Constant (T) and hit the calculate button.

FAQs on Drawdown in Well 1 given Aquifer Constant and Discharge

What is the formula to find Drawdown in Well 1 given Aquifer Constant and Discharge?

The formula of Drawdown in Well 1 given Aquifer Constant and Discharge is expressed as Drawdown in Well 1 = Drawdown in Well 2+((Discharge)/(2.72*Aquifer Constant)). Here is an example- 2.151052 = 2.136+((0.911)/(2.72*24.67)).

How to calculate Drawdown in Well 1 given Aquifer Constant and Discharge?

With Drawdown in Well 2 (s₂), Discharge (Q_w) & Aquifer Constant (T) we can find Drawdown in Well 1 given Aquifer Constant and Discharge using the formula - Drawdown in Well 1 = Drawdown in Well 2+((Discharge)/(2.72*Aquifer Constant)).

What are the other ways to Calculate Drawdown in Well 1?

Here are the different ways to Calculate Drawdown in Well 1-

Drawdown in Well 1=Thickness of Aquifer-Depth of Water in Well 1
Drawdown in Well 1=Drawdown in Well 2+((Discharge*log((Radial Distance at Observation Well 2/Radial Distance at Observation Well 1),10))/(2.72*Aquifer Constant))

Can the Drawdown in Well 1 given Aquifer Constant and Discharge be negative?

No, the Drawdown in Well 1 given Aquifer Constant and Discharge, measured in Length cannot be negative.

Which unit is used to measure Drawdown in Well 1 given Aquifer Constant and Discharge?

Drawdown in Well 1 given Aquifer Constant and Discharge is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Drawdown in Well 1 given Aquifer Constant and Discharge can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Drawdown in Well 1 given Aquifer Constant and Discharge Formula

​GoDrawdown in Well 1 given Thickness of Aquifer from Impermeable Layer Formula

​GoDrawdown in Well 1 given Aquifer Constant Formula

Drawdown in Well 1 given Aquifer Constant and Discharge Example

Drawdown in Well 1 given Aquifer Constant and Discharge Solution

Drawdown in Well 1 given Aquifer Constant and Discharge Formula Elements

Other Formulas to find Drawdown in Well 1

Other formulas in Discharge And Drawdown in Well category

How to Evaluate Drawdown in Well 1 given Aquifer Constant and Discharge?

FAQs on Drawdown in Well 1 given Aquifer Constant and Discharge

Variable Name

GoDrawdown in Well 1 given Thickness of Aquifer from Impermeable Layer Formula

GoDrawdown in Well 1 given Aquifer Constant Formula