FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Drawdown given Specific Capacity of Well Formula

Fx Copy

LaTeX Copy

The Total Drawdown in Well refers to the reduction in water level from the original, static level to the level during pumping. Check FAQs

s t = \frac{Q}{S c}

s_t - Total Drawdown?Q - Discharge?S_c - Specific Capacity?

Drawdown given Specific Capacity of Well Example

With values

With units

Only example

Here is how the Drawdown given Specific Capacity of Well equation looks like with Values.

Here is how the Drawdown given Specific Capacity of Well equation looks like with Units.

Here is how the Drawdown given Specific Capacity of Well equation looks like.

27.2973 = \frac{1.01}{0.037}

27.2973m = \frac{1.01m³/s}{0.037m²/s}

27.2973 = \frac{1.01}{0.037}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Environmental Engineering » fx Drawdown given Specific Capacity of Well

Drawdown given Specific Capacity of Well Solution

Follow our step by step solution on how to calculate Drawdown given Specific Capacity of Well?

FIRST Step Consider the formula

s t = \frac{Q}{S c}

Next Step Substitute values of Variables

∴

s t = \frac{1.01m³/s}{0.037m²/s}

Next Step Prepare to Evaluate

∴

s t = \frac{1.01}{0.037}

Next Step Evaluate

∴

s t = 27.2972972972973m

LAST Step Rounding Answer

∴

s t = 27.2973m

Drawdown given Specific Capacity of Well Formula Elements

Variables

Total Drawdown

The Total Drawdown in Well refers to the reduction in water level from the original, static level to the level during pumping.

Symbol: s_t

Measurement: LengthUnit: m

Note: Value can be positive or negative.

Formulas to find Total Drawdown

Discharge

Discharge is the rate of flow of a liquid.

Symbol: Q

Measurement: Volumetric Flow RateUnit: m³/s

Note: Value can be positive or negative.

Formulas to find Discharge

Specific Capacity

The Specific Capacity refers to the measure used in hydrogeology to evaluate the efficiency of a well, defined as the amount of water a well can produce per unit of drawdown.

Symbol: S_c

Measurement: Kinematic ViscosityUnit: m²/s

Note: Value should be greater than 0.

Formulas to find Specific Capacity

Other formulas in Specific Capacity of Well category

Go Specific Capacity given Drawdown

S c = \frac{Q}{s t}

Go Discharge given Specific Capacity

Q = S c \cdot s t

Go Specific Capacity given Aquifer Loss

S c = (\frac{Q}{CQ n + BQ})

Go Aquifer Loss given Specific Capacity

BQ = (\frac{Q}{S c}) - CQ n

How to Evaluate Drawdown given Specific Capacity of Well?

Drawdown given Specific Capacity of Well evaluator uses Total Drawdown = Discharge/Specific Capacity to evaluate the Total Drawdown, The Drawdown given Specific Capacity of Well formula is defined as the measure of the decline in water level in a well due to pumping, which is influenced by the well's specific capacity, a key parameter in evaluating well performance and sustainability in groundwater resources management. Total Drawdown is denoted by s_t symbol.

How to evaluate Drawdown given Specific Capacity of Well using this online evaluator? To use this online evaluator for Drawdown given Specific Capacity of Well, enter Discharge (Q) & Specific Capacity (S_c) and hit the calculate button.

FAQs on Drawdown given Specific Capacity of Well

What is the formula to find Drawdown given Specific Capacity of Well?

The formula of Drawdown given Specific Capacity of Well is expressed as Total Drawdown = Discharge/Specific Capacity. Here is an example- 27.2973 = 1.01/0.037.

How to calculate Drawdown given Specific Capacity of Well?

With Discharge (Q) & Specific Capacity (S_c) we can find Drawdown given Specific Capacity of Well using the formula - Total Drawdown = Discharge/Specific Capacity.

Can the Drawdown given Specific Capacity of Well be negative?

Yes, the Drawdown given Specific Capacity of Well, measured in Length can be negative.

Which unit is used to measure Drawdown given Specific Capacity of Well?

Drawdown given Specific Capacity of Well is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Drawdown given Specific Capacity of Well can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit