FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Drainage Area for Peak Rate of Runoff Formula

Fx Copy

LaTeX Copy

Drainage Area is the total surface area, where the water from rain which is not absorbed into the ground flows over the ground surface, back into streams, to finally reach that point. Check FAQs

A D = {(\frac{Q BZ \cdot 455}{K' \cdot I BZ \cdot \sqrt{S o}})}^{2}

A_D - Drainage Area?Q_BZ - Peak Rate of Runoff for Burkli Zeigler?K' - Runoff Coefficient for Burkli Zeigler?I_BZ - Intensity of Rainfall in Burkli Zeigler?S_o - Slope of the ground?

Drainage Area for Peak Rate of Runoff Example

With values

With units

Only example

Here is how the Drainage Area for Peak Rate of Runoff equation looks like with Values.

Here is how the Drainage Area for Peak Rate of Runoff equation looks like with Units.

Here is how the Drainage Area for Peak Rate of Runoff equation looks like.

30 = {(\frac{1.34 \cdot 455}{251878.2 \cdot 7.5 \cdot \sqrt{0.045}})}^{2}

30ha = {(\frac{1.34m³/s \cdot 455}{251878.2 \cdot 7.5cm/h \cdot \sqrt{0.045}})}^{2}

30 = {(\frac{1.34 \cdot 455}{251878.2 \cdot 7.5 \cdot \sqrt{0.045}})}^{2}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Environmental Engineering » fx Drainage Area for Peak Rate of Runoff

Drainage Area for Peak Rate of Runoff Solution

Follow our step by step solution on how to calculate Drainage Area for Peak Rate of Runoff?

FIRST Step Consider the formula

A D = {(\frac{Q BZ \cdot 455}{K' \cdot I BZ \cdot \sqrt{S o}})}^{2}

Next Step Substitute values of Variables

∴

A D = {(\frac{1.34m³/s \cdot 455}{251878.2 \cdot 7.5cm/h \cdot \sqrt{0.045}})}^{2}

Next Step Convert Units

∴

A D = {(\frac{1.34m³/s \cdot 455}{251878.2 \cdot 2.1E-5m/s \cdot \sqrt{0.045}})}^{2}

Next Step Prepare to Evaluate

∴

A D = {(\frac{1.34 \cdot 455}{251878.2 \cdot 2.1E-5 \cdot \sqrt{0.045}})}^{2}

Next Step Evaluate

∴

A D = 299999.954564115m²

Next Step Convert to Output's Unit

∴

A D = 29.9999954564115ha

LAST Step Rounding Answer

∴

A D = 30ha

Drainage Area for Peak Rate of Runoff Formula Elements

Variables

Functions

Drainage Area

Drainage Area is the total surface area, where the water from rain which is not absorbed into the ground flows over the ground surface, back into streams, to finally reach that point.

Symbol: A_D

Measurement: AreaUnit: ha

Note: Value can be positive or negative.

Formulas to find Drainage Area

Peak Rate of Runoff for Burkli Zeigler

Peak Rate of Runoff for Burkli Zeigler is the maximum rate of discharge during the period of runoff caused by a storm.

Symbol: Q_BZ

Measurement: Volumetric Flow RateUnit: m³/s

Note: Value should be greater than 0.

Formulas to find Peak Rate of Runoff for Burkli Zeigler

Runoff Coefficient for Burkli Zeigler

Runoff Coefficient for Burkli Zeigler is a dimensionless coefficient relating the amount of runoff to the amount of precipitation received.

Symbol: K'

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Runoff Coefficient for Burkli Zeigler

Intensity of Rainfall in Burkli Zeigler

Intensity of Rainfall in Burkli Zeigler refers to the amount of rain that falls over a specific period, usually measured in millimeters per hour (mm/hr) or inches per hour.

Symbol: I_BZ

Measurement: SpeedUnit: cm/h

Note: Value should be greater than 0.

Formulas to find Intensity of Rainfall in Burkli Zeigler

Slope of the ground

Slope of the ground is defined in terms of meter per unit thousands of meter.

Symbol: S_o

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Slope of the ground

sqrt

A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number.

Syntax: sqrt(Number)

Other formulas in Burkli Ziegler Formula category

Go Peak Rate of Runoff from Burkli-Ziegler Formula

Q BZ = (\frac{K' \cdot I BZ \cdot A D}{455}) \cdot \sqrt{\frac{S o}{A D}}

Go Runoff Coefficient for Peak Rate of Runoff

K' = \frac{455 \cdot Q BZ}{I BZ \cdot \sqrt{S o \cdot A D}}

Go Maximum Rainfall Intensity given Peak Rate of Runoff

I BZ = 455 \cdot \frac{Q BZ}{K' \cdot \sqrt{S o \cdot A D}}

Go Slope of Ground Surface given Peak Rate of Runoff

S o = {(\frac{Q BZ \cdot 455}{I BZ \cdot K' \cdot \sqrt{A D}})}^{2}

How to Evaluate Drainage Area for Peak Rate of Runoff?

Drainage Area for Peak Rate of Runoff evaluator uses Drainage Area = ((Peak Rate of Runoff for Burkli Zeigler*455)/(Runoff Coefficient for Burkli Zeigler*Intensity of Rainfall in Burkli Zeigler*sqrt(Slope of the ground)))^2 to evaluate the Drainage Area, The Drainage Area for Peak Rate of Runoff formula is defined as the the land area from which surface runoff is collected and drained through a common outlet, such as a river, stream, or drain. Understanding the drainage area is fundamental for hydrological studies, flood management, and designing efficient drainage systems. Drainage Area is denoted by A_D symbol.

How to evaluate Drainage Area for Peak Rate of Runoff using this online evaluator? To use this online evaluator for Drainage Area for Peak Rate of Runoff, enter Peak Rate of Runoff for Burkli Zeigler (Q_BZ), Runoff Coefficient for Burkli Zeigler (K'), Intensity of Rainfall in Burkli Zeigler (I_BZ) & Slope of the ground (S_o) and hit the calculate button.

FAQs on Drainage Area for Peak Rate of Runoff

What is the formula to find Drainage Area for Peak Rate of Runoff?

The formula of Drainage Area for Peak Rate of Runoff is expressed as Drainage Area = ((Peak Rate of Runoff for Burkli Zeigler*455)/(Runoff Coefficient for Burkli Zeigler*Intensity of Rainfall in Burkli Zeigler*sqrt(Slope of the ground)))^2. Here is an example- 0.003 = ((1.34*455)/(251878.2*2.08333333333333E-05*sqrt(0.045)))^2.

How to calculate Drainage Area for Peak Rate of Runoff?

With Peak Rate of Runoff for Burkli Zeigler (Q_BZ), Runoff Coefficient for Burkli Zeigler (K'), Intensity of Rainfall in Burkli Zeigler (I_BZ) & Slope of the ground (S_o) we can find Drainage Area for Peak Rate of Runoff using the formula - Drainage Area = ((Peak Rate of Runoff for Burkli Zeigler*455)/(Runoff Coefficient for Burkli Zeigler*Intensity of Rainfall in Burkli Zeigler*sqrt(Slope of the ground)))^2. This formula also uses Square Root (sqrt) function(s).

Can the Drainage Area for Peak Rate of Runoff be negative?

Yes, the Drainage Area for Peak Rate of Runoff, measured in Area can be negative.

Which unit is used to measure Drainage Area for Peak Rate of Runoff?

Drainage Area for Peak Rate of Runoff is usually measured using the Hectare[ha] for Area. Square Meter[ha], Square Kilometer[ha], Square Centimeter[ha] are the few other units in which Drainage Area for Peak Rate of Runoff can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Drainage Area for Peak Rate of Runoff Formula

Drainage Area for Peak Rate of Runoff Example

Drainage Area for Peak Rate of Runoff Solution

Drainage Area for Peak Rate of Runoff Formula Elements

Other formulas in Burkli Ziegler Formula category

How to Evaluate Drainage Area for Peak Rate of Runoff?

FAQs on Drainage Area for Peak Rate of Runoff

Variable Name