FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Discharging Current of dv-dt Protection Thyristor Circuits Formula

Fx Copy

LaTeX Copy

Discharging current is the current that is calculated in the case of dv/dt limited R₁ and C_s. Check FAQs

I discharge = \frac{V in}{(R 1 + R 2)}

I_discharge - Discharging Current?V_in - Input Voltage?R₁ - Resistance 1?R₂ - Resistance 2?

Discharging Current of dv-dt Protection Thyristor Circuits Example

With values

With units

Only example

Here is how the Discharging Current of dv-dt Protection Thyristor Circuits equation looks like with Values.

Here is how the Discharging Current of dv-dt Protection Thyristor Circuits equation looks like with Units.

Here is how the Discharging Current of dv-dt Protection Thyristor Circuits equation looks like.

1.875 = \frac{45}{(12.5 + 11.5)}

1.875A = \frac{45V}{(12.5Ω + 11.5Ω)}

1.875 = \frac{45}{(12.5 + 11.5)}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Electrical » Category

Power Electronics » fx Discharging Current of dv-dt Protection Thyristor Circuits

Discharging Current of dv-dt Protection Thyristor Circuits Solution

Follow our step by step solution on how to calculate Discharging Current of dv-dt Protection Thyristor Circuits?

FIRST Step Consider the formula

I discharge = \frac{V in}{(R 1 + R 2)}

Next Step Substitute values of Variables

∴

I discharge = \frac{45V}{(12.5Ω + 11.5Ω)}

Next Step Prepare to Evaluate

∴

I discharge = \frac{45}{(12.5 + 11.5)}

LAST Step Evaluate

∴

I discharge = 1.875A

Discharging Current of dv-dt Protection Thyristor Circuits Formula Elements

Variables

Discharging Current

Discharging current is the current that is calculated in the case of dv/dt limited R₁ and C_s.

Symbol: I_discharge

Measurement: Electric CurrentUnit: A

Note: Value can be positive or negative.

Formulas to find Discharging Current

Input Voltage

Input Voltage is defined as the voltage applied at the input terminal in a thyristor based circuit.

Symbol: V_in

Measurement: Electric PotentialUnit: V

Note: Value should be greater than 0.

Formulas to find Input Voltage

Resistance 1

Resistance 1 is a measure of the opposition to current flow in an electrical circuit.

Symbol: R₁

Measurement: Electric ResistanceUnit: Ω

Note: Value can be positive or negative.

Formulas to find Resistance 1

Resistance 2

Resistance 2 is a measure of the opposition to current flow in an electrical circuit.

Symbol: R₂

Measurement: Electric ResistanceUnit: Ω

Note: Value can be positive or negative.

Formulas to find Resistance 2

Other formulas in SCR Firing Circuit category

Go Derating Factor of Series Connected Thyristor String

DRF = 1 - \frac{V string}{V ss \cdot n}

Go Leakage Current of Collector-Base Junction

I CBO = I C - α \cdot I C

Go Power Dissipated by Heat in SCR

P dis = \frac{T junc - T amb}{θ}

Go Thermal Resistance of SCR

θ = \frac{T junc - T amb}{P dis}

How to Evaluate Discharging Current of dv-dt Protection Thyristor Circuits?

Discharging Current of dv-dt Protection Thyristor Circuits evaluator uses Discharging Current = Input Voltage/((Resistance 1+Resistance 2)) to evaluate the Discharging Current, Discharging current of dv-dt protection thyristor circuits is the current that is calculated in the case of dv/dt limited R₁ and C_S. It is the ratio of input voltage to the sum of R₁ and R₂. Discharging Current is denoted by I_discharge symbol.

How to evaluate Discharging Current of dv-dt Protection Thyristor Circuits using this online evaluator? To use this online evaluator for Discharging Current of dv-dt Protection Thyristor Circuits, enter Input Voltage (V_in), Resistance 1 (R₁) & Resistance 2 (R₂) and hit the calculate button.

FAQs on Discharging Current of dv-dt Protection Thyristor Circuits

What is the formula to find Discharging Current of dv-dt Protection Thyristor Circuits?

The formula of Discharging Current of dv-dt Protection Thyristor Circuits is expressed as Discharging Current = Input Voltage/((Resistance 1+Resistance 2)). Here is an example- 1.875 = 45/((12.5+11.5)).

How to calculate Discharging Current of dv-dt Protection Thyristor Circuits?

With Input Voltage (V_in), Resistance 1 (R₁) & Resistance 2 (R₂) we can find Discharging Current of dv-dt Protection Thyristor Circuits using the formula - Discharging Current = Input Voltage/((Resistance 1+Resistance 2)).

Can the Discharging Current of dv-dt Protection Thyristor Circuits be negative?

Yes, the Discharging Current of dv-dt Protection Thyristor Circuits, measured in Electric Current can be negative.

Which unit is used to measure Discharging Current of dv-dt Protection Thyristor Circuits?

Discharging Current of dv-dt Protection Thyristor Circuits is usually measured using the Ampere[A] for Electric Current. Milliampere[A], Microampere[A], Centiampere[A] are the few other units in which Discharging Current of dv-dt Protection Thyristor Circuits can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Discharging Current of dv-dt Protection Thyristor Circuits Formula

Discharging Current of dv-dt Protection Thyristor Circuits Example

Discharging Current of dv-dt Protection Thyristor Circuits Solution

Discharging Current of dv-dt Protection Thyristor Circuits Formula Elements

Other formulas in SCR Firing Circuit category

How to Evaluate Discharging Current of dv-dt Protection Thyristor Circuits?

FAQs on Discharging Current of dv-dt Protection Thyristor Circuits

Variable Name