FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Discharge for Partially Penetrating Well given Correction Factor Formula

GoDischarge for Partially Penetrating Well Formula

Fx Copy

LaTeX Copy

Discharge for Partially Penetrating Well refers to the volume of water extracted from an aquifer when the well does not extend through the entire thickness of the aquifer. Check FAQs

Q v = G \cdot Q fe

Q_v - Discharge for Partially Penetrating Well?G - Correction Factor?Q_fe - Discharge for Fully Penetrating Gravity Well?

Discharge for Partially Penetrating Well given Correction Factor Example

With values

With units

Only example

Here is how the Discharge for Partially Penetrating Well given Correction Factor equation looks like with Values.

Here is how the Discharge for Partially Penetrating Well given Correction Factor equation looks like with Units.

Here is how the Discharge for Partially Penetrating Well given Correction Factor equation looks like.

5.0796 = 0.83 \cdot 6.12

5.0796m³/s = 0.83 \cdot 6.12m³/s

5.0796 = 0.83 \cdot 6.12

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Environmental Engineering » fx Discharge for Partially Penetrating Well given Correction Factor

Discharge for Partially Penetrating Well given Correction Factor Solution

Follow our step by step solution on how to calculate Discharge for Partially Penetrating Well given Correction Factor?

FIRST Step Consider the formula

Q v = G \cdot Q fe

Next Step Substitute values of Variables

∴

Q v = 0.83 \cdot 6.12m³/s

Next Step Prepare to Evaluate

∴

Q v = 0.83 \cdot 6.12

LAST Step Evaluate

∴

Q v = 5.0796m³/s

Discharge for Partially Penetrating Well given Correction Factor Formula Elements

Variables

Discharge for Partially Penetrating Well

Discharge for Partially Penetrating Well refers to the volume of water extracted from an aquifer when the well does not extend through the entire thickness of the aquifer.

Symbol: Q_v

Measurement: Volumetric Flow RateUnit: m³/s

Note: Value should be greater than 0.

Formulas to find Discharge for Partially Penetrating Well

Correction Factor

Correction Factor refers to the reduced efficiency and altered flow patterns due to the well not extending through the entire aquifer thickness.

Symbol: G

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Correction Factor

Discharge for Fully Penetrating Gravity Well

Discharge for Fully Penetrating Gravity Well refers to the volume of water extracted from an unconfined aquifer where the well reaches the entire thickness of the aquifer.

Symbol: Q_fe

Measurement: Volumetric Flow RateUnit: m³/s

Note: Value should be greater than 0.

Formulas to find Discharge for Fully Penetrating Gravity Well

Other Formulas to find Discharge for Partially Penetrating Well

Go Discharge for Partially Penetrating Well

Q v = \frac{2 \cdot π \cdot K \cdot b \cdot (H - h w) \cdot G}{\log ((\frac{R}{r}), e)}

Other formulas in Partially Penetrating Artesian Well category

Go Coefficient of Permeability given Discharge for Partially Penetrating Well

K = \frac{Q v}{\frac{2 \cdot π \cdot b \cdot (H - h w) \cdot G}{\log ((\frac{R}{r}), e)}}

Go Aquifer Thickness given Discharge for Partially Penetrating Well

b = \frac{Q v}{\frac{2 \cdot π \cdot K \cdot (H - h w) \cdot G}{\log ((\frac{R}{r}), e)}}

Go Thickness of Aquifer given Discharge for Partially Penetrating Well

H = h w + \frac{Q v \cdot (\log ((\frac{R}{r}), e))}{2 \cdot π \cdot K \cdot b \cdot G}

Go Depth of Water in Well given Discharge for Partially Penetrating Well

h w = H - (\frac{Q v \cdot (\log ((\frac{R}{r}), e))}{2 \cdot π \cdot K \cdot b \cdot G})

How to Evaluate Discharge for Partially Penetrating Well given Correction Factor?

Discharge for Partially Penetrating Well given Correction Factor evaluator uses Discharge for Partially Penetrating Well = Correction Factor*Discharge for Fully Penetrating Gravity Well to evaluate the Discharge for Partially Penetrating Well, Discharge for Partially Penetrating Well given Correction Factor formula is defined as a measure of the volumetric flow rate of a partially penetrating well, taking into account the correction factor that adjusts for the well's partial penetration into the aquifer, providing a more accurate representation of the well's discharge capacity in various flow conditions. Discharge for Partially Penetrating Well is denoted by Q_v symbol.

How to evaluate Discharge for Partially Penetrating Well given Correction Factor using this online evaluator? To use this online evaluator for Discharge for Partially Penetrating Well given Correction Factor, enter Correction Factor (G) & Discharge for Fully Penetrating Gravity Well (Q_fe) and hit the calculate button.

FAQs on Discharge for Partially Penetrating Well given Correction Factor

What is the formula to find Discharge for Partially Penetrating Well given Correction Factor?

The formula of Discharge for Partially Penetrating Well given Correction Factor is expressed as Discharge for Partially Penetrating Well = Correction Factor*Discharge for Fully Penetrating Gravity Well. Here is an example- 0.000415 = 0.83*6.12.

How to calculate Discharge for Partially Penetrating Well given Correction Factor?

With Correction Factor (G) & Discharge for Fully Penetrating Gravity Well (Q_fe) we can find Discharge for Partially Penetrating Well given Correction Factor using the formula - Discharge for Partially Penetrating Well = Correction Factor*Discharge for Fully Penetrating Gravity Well.

What are the other ways to Calculate Discharge for Partially Penetrating Well?

Here are the different ways to Calculate Discharge for Partially Penetrating Well-

Discharge for Partially Penetrating Well=(2*pi*Coefficient of Permeability*Aquifer Thickness*(Initial Piezometric Surface-Depth of Water)*Correction Factor)/(log((Radius of Influence/Radius of Well),e))

Can the Discharge for Partially Penetrating Well given Correction Factor be negative?

No, the Discharge for Partially Penetrating Well given Correction Factor, measured in Volumetric Flow Rate cannot be negative.

Which unit is used to measure Discharge for Partially Penetrating Well given Correction Factor?

Discharge for Partially Penetrating Well given Correction Factor is usually measured using the Cubic Meter per Second[m³/s] for Volumetric Flow Rate. Cubic Meter per Day[m³/s], Cubic Meter per Hour[m³/s], Cubic Meter per Minute[m³/s] are the few other units in which Discharge for Partially Penetrating Well given Correction Factor can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Discharge for Partially Penetrating Well given Correction Factor Formula

​GoDischarge for Partially Penetrating Well Formula

Discharge for Partially Penetrating Well given Correction Factor Example

Discharge for Partially Penetrating Well given Correction Factor Solution

Discharge for Partially Penetrating Well given Correction Factor Formula Elements

Other Formulas to find Discharge for Partially Penetrating Well

Other formulas in Partially Penetrating Artesian Well category

How to Evaluate Discharge for Partially Penetrating Well given Correction Factor?

FAQs on Discharge for Partially Penetrating Well given Correction Factor

Variable Name

GoDischarge for Partially Penetrating Well Formula