FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Diameter of wire given initial tensile force and length of wire Formula

GoDiameter of wire given resisting force on wire Formula

GoDiameter of wire given bursting force due to fluid pressure Formula

Fx Copy

LaTeX Copy

Diameter of Wire is the diameter of the wire in thread measurements. Check FAQs

G wire = \frac{F}{L \cdot (\frac{π}{2}) \cdot σ w}

G_wire - Diameter of Wire?F - Force?L - Length of wire?σ_w - Initial Winding Stress?π - Archimedes' constant?

Diameter of wire given initial tensile force and length of wire Example

With values

With units

Only example

Here is how the Diameter of wire given initial tensile force and length of wire equation looks like with Values.

Here is how the Diameter of wire given initial tensile force and length of wire equation looks like with Units.

Here is how the Diameter of wire given initial tensile force and length of wire equation looks like.

0.4042 = \frac{20}{3500 \cdot (\frac{3.1416}{2}) \cdot 9}

0.4042mm = \frac{20kN}{3500mm \cdot (\frac{3.1416}{2}) \cdot 9MPa}

0.4042 = \frac{20}{3500 \cdot (\frac{3.1416}{2}) \cdot 9}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Strength of Materials » fx Diameter of wire given initial tensile force and length of wire

Diameter of wire given initial tensile force and length of wire Solution

Follow our step by step solution on how to calculate Diameter of wire given initial tensile force and length of wire?

FIRST Step Consider the formula

G wire = \frac{F}{L \cdot (\frac{π}{2}) \cdot σ w}

Next Step Substitute values of Variables

∴

G wire = \frac{20kN}{3500mm \cdot (\frac{π}{2}) \cdot 9MPa}

Next Step Substitute values of Constants

∴

G wire = \frac{20kN}{3500mm \cdot (\frac{3.1416}{2}) \cdot 9MPa}

Next Step Convert Units

∴

G wire = \frac{20000N}{3.5m \cdot (\frac{3.1416}{2}) \cdot 9E+6Pa}

Next Step Prepare to Evaluate

∴

G wire = \frac{20000}{3.5 \cdot (\frac{3.1416}{2}) \cdot 9E+6}

Next Step Evaluate

∴

G wire = 0.000404203030074655m

Next Step Convert to Output's Unit

∴

G wire = 0.404203030074655mm

LAST Step Rounding Answer

∴

G wire = 0.4042mm

Diameter of wire given initial tensile force and length of wire Formula Elements

Variables

Constants

Diameter of Wire

Diameter of Wire is the diameter of the wire in thread measurements.

Symbol: G_wire

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Diameter of Wire

Force

Force is any interaction that, when unopposed, will change the motion of an object. In other words, a force can cause an object with mass to change its velocity.

Symbol: F

Measurement: ForceUnit: kN

Note: Value should be greater than 0.

Formulas to find Force

Length of wire

Length of wire is the measurement or extent of wirer from end to end.

Symbol: L

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Length of wire

Initial Winding Stress

Initial Winding Stress is the tensile stress produced in the winding wire.

Symbol: σ_w

Measurement: PressureUnit: MPa

Note: Value should be greater than 0.

Formulas to find Initial Winding Stress

Archimedes' constant

Archimedes' constant is a mathematical constant that represents the ratio of the circumference of a circle to its diameter.

Symbol: π

Value: 3.14159265358979323846264338327950288

Other Formulas to find Diameter of Wire

Go Diameter of wire given resisting force on wire

G wire = \frac{F}{L \cdot (\frac{π}{2}) \cdot σ wire}

Go Diameter of wire given bursting force due to fluid pressure

G wire = \frac{(\frac{F}{L}) - (2 \cdot t \cdot σ c)}{(\frac{π}{2}) \cdot σ wire}

Go Diameter of wire given compressive circumferential stress exerted by wire

G wire = \frac{F circumference \cdot (4 \cdot t)}{π \cdot σ w}

Go Diameter of wire given initial tensile force in wire

G wire = \sqrt{\frac{F}{(N \cdot ((\frac{π}{2}))) \cdot σ w}}

How to Evaluate Diameter of wire given initial tensile force and length of wire?

Diameter of wire given initial tensile force and length of wire evaluator uses Diameter of Wire = Force/(Length of wire*(pi/2)*Initial Winding Stress) to evaluate the Diameter of Wire, Diameter of wire given initial tensile force and length of wire is the diameter of the wire-wound over the thin cylindrical shell. Diameter of Wire is denoted by G_wire symbol.

How to evaluate Diameter of wire given initial tensile force and length of wire using this online evaluator? To use this online evaluator for Diameter of wire given initial tensile force and length of wire, enter Force (F), Length of wire (L) & Initial Winding Stress (σ_w) and hit the calculate button.

FAQs on Diameter of wire given initial tensile force and length of wire

What is the formula to find Diameter of wire given initial tensile force and length of wire?

The formula of Diameter of wire given initial tensile force and length of wire is expressed as Diameter of Wire = Force/(Length of wire*(pi/2)*Initial Winding Stress). Here is an example- 24.25218 = 20000/(3.5*(pi/2)*9000000).

How to calculate Diameter of wire given initial tensile force and length of wire?

With Force (F), Length of wire (L) & Initial Winding Stress (σ_w) we can find Diameter of wire given initial tensile force and length of wire using the formula - Diameter of Wire = Force/(Length of wire*(pi/2)*Initial Winding Stress). This formula also uses Archimedes' constant .

What are the other ways to Calculate Diameter of Wire?

Here are the different ways to Calculate Diameter of Wire-

Diameter of Wire=Force/(Length of wire*(pi/2)*Stress in wire due to fluid pressure)
Diameter of Wire=((Force/Length of wire)-(2*Thickness Of Wire*Circumferential Stress due to Fluid Pressure))/((pi/2)*Stress in wire due to fluid pressure)
Diameter of Wire=(Compressive Circumferential Stress*(4*Thickness Of Wire))/(pi*Initial Winding Stress)

Can the Diameter of wire given initial tensile force and length of wire be negative?

No, the Diameter of wire given initial tensile force and length of wire, measured in Length cannot be negative.

Which unit is used to measure Diameter of wire given initial tensile force and length of wire?

Diameter of wire given initial tensile force and length of wire is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Diameter of wire given initial tensile force and length of wire can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Diameter of wire given initial tensile force and length of wire Formula

​GoDiameter of wire given resisting force on wire Formula

​GoDiameter of wire given bursting force due to fluid pressure Formula

Diameter of wire given initial tensile force and length of wire Example

Diameter of wire given initial tensile force and length of wire Solution

Diameter of wire given initial tensile force and length of wire Formula Elements

Other Formulas to find Diameter of Wire

How to Evaluate Diameter of wire given initial tensile force and length of wire?

FAQs on Diameter of wire given initial tensile force and length of wire

Variable Name

GoDiameter of wire given resisting force on wire Formula

GoDiameter of wire given bursting force due to fluid pressure Formula