FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Diameter of Section through Section Considering Condition of Minimum Specific Energy Formula

GoDiameter of Section given Froude Number Formula

Fx Copy

LaTeX Copy

The Diameter of Section refers to the length of the segment that passes through the center of the circle and touches two points on the edge of the circle. Check FAQs

d section = \frac{{V mean}^{2}}{[g]}

d_section - Diameter of Section?V_mean - Mean Velocity?[g] - Gravitational acceleration on Earth?

Diameter of Section through Section Considering Condition of Minimum Specific Energy Example

With values

With units

Only example

Here is how the Diameter of Section through Section Considering Condition of Minimum Specific Energy equation looks like with Values.

Here is how the Diameter of Section through Section Considering Condition of Minimum Specific Energy equation looks like with Units.

Here is how the Diameter of Section through Section Considering Condition of Minimum Specific Energy equation looks like.

10.4021 = \frac{{10.1}^{2}}{9.8066}

10.4021m = \frac{{10.1m/s}^{2}}{9.8066m/s²}

10.4021 = \frac{{10.1}^{2}}{9.8066}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Hydraulics and Waterworks » fx Diameter of Section through Section Considering Condition of Minimum Specific Energy

Diameter of Section through Section Considering Condition of Minimum Specific Energy Solution

Follow our step by step solution on how to calculate Diameter of Section through Section Considering Condition of Minimum Specific Energy?

FIRST Step Consider the formula

d section = \frac{{V mean}^{2}}{[g]}

Next Step Substitute values of Variables

∴

d section = \frac{{10.1m/s}^{2}}{[g]}

Next Step Substitute values of Constants

∴

d section = \frac{{10.1m/s}^{2}}{9.8066m/s²}

Next Step Prepare to Evaluate

∴

d section = \frac{{10.1}^{2}}{9.8066}

Next Step Evaluate

∴

d section = 10.4021250885878m

LAST Step Rounding Answer

∴

d section = 10.4021m

Diameter of Section through Section Considering Condition of Minimum Specific Energy Formula Elements

Variables

Constants

Diameter of Section

The Diameter of Section refers to the length of the segment that passes through the center of the circle and touches two points on the edge of the circle.

Symbol: d_section

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Diameter of Section

Mean Velocity

Mean velocity is defined as the average velocity of a fluid at a point and over an arbitrary time T.

Symbol: V_mean

Measurement: SpeedUnit: m/s

Note: Value can be positive or negative.

Formulas to find Mean Velocity

Gravitational acceleration on Earth

Gravitational acceleration on Earth means that the velocity of an object in free fall will increase by 9.8 m/s2 every second.

Symbol: [g]

Value: 9.80665 m/s²

Other Formulas to find Diameter of Section

Go Diameter of Section given Froude Number

d section = \frac{{(\frac{V FN}{Fr})}^{2}}{[g]}

Other formulas in Specific Energy and Critical Depth category

Go Total Energy per unit Weight of Water in Flow Section

E total = (\frac{{V mean}^{2}}{2 \cdot [g]}) + d f + y

Go Datum Height for Total Energy per unit Weight of Water in Flow Section

y = E total - ((\frac{{V mean}^{2}}{2 \cdot [g]}) + d f)

Go Mean Velocity of Flow for Total Energy per Unit Weight of Water in Flow Section

V mean = \sqrt{(E total - (d f + y)) \cdot 2 \cdot [g]}

Go Depth of Flow given Total Energy per Unit Weight of Water in Flow Section

d f = E total - ((\frac{{V mean}^{2}}{2 \cdot [g]}) + y)

How to Evaluate Diameter of Section through Section Considering Condition of Minimum Specific Energy?

Diameter of Section through Section Considering Condition of Minimum Specific Energy evaluator uses Diameter of Section = (Mean Velocity^2)/[g] to evaluate the Diameter of Section, The Diameter of Section through Section Considering Condition of Minimum Specific Energy is defined as width of channel section at any point. Diameter of Section is denoted by d_section symbol.

How to evaluate Diameter of Section through Section Considering Condition of Minimum Specific Energy using this online evaluator? To use this online evaluator for Diameter of Section through Section Considering Condition of Minimum Specific Energy, enter Mean Velocity (V_mean) and hit the calculate button.

FAQs on Diameter of Section through Section Considering Condition of Minimum Specific Energy

What is the formula to find Diameter of Section through Section Considering Condition of Minimum Specific Energy?

The formula of Diameter of Section through Section Considering Condition of Minimum Specific Energy is expressed as Diameter of Section = (Mean Velocity^2)/[g]. Here is an example- 10.40213 = (10.1^2)/[g].

How to calculate Diameter of Section through Section Considering Condition of Minimum Specific Energy?

With Mean Velocity (V_mean) we can find Diameter of Section through Section Considering Condition of Minimum Specific Energy using the formula - Diameter of Section = (Mean Velocity^2)/[g]. This formula also uses Gravitational acceleration on Earth constant(s).

What are the other ways to Calculate Diameter of Section?

Here are the different ways to Calculate Diameter of Section-

Diameter of Section=((Mean Velocity for Froude Number/Froude Number)^2)/[g]

Can the Diameter of Section through Section Considering Condition of Minimum Specific Energy be negative?

No, the Diameter of Section through Section Considering Condition of Minimum Specific Energy, measured in Length cannot be negative.

Which unit is used to measure Diameter of Section through Section Considering Condition of Minimum Specific Energy?

Diameter of Section through Section Considering Condition of Minimum Specific Energy is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Diameter of Section through Section Considering Condition of Minimum Specific Energy can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!