FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Diameter of Section given Hydraulic Radius for Channel Formula

GoDiameter of Section given Wetted Area Formula

GoDiameter of Section given Wetted Perimeter Formula

Fx Copy

LaTeX Copy

The Diameter of Section refers to the length of the segment that passes through the center of the circle and touches two points on the edge of the circle. Check FAQs

d section = \frac{R h(cir)}{0.25 \cdot (1 - (\frac{\sin (θ Angle)}{(\frac{180}{π}) \cdot θ Angle}))}

d_section - Diameter of Section?R_h(cir) - Hydraulic Radius of Circular Channel?θ_Angle - Subtended Angle in Radians?π - Archimedes' constant?

Diameter of Section given Hydraulic Radius for Channel Example

With values

With units

Only example

Here is how the Diameter of Section given Hydraulic Radius for Channel equation looks like with Values.

Here is how the Diameter of Section given Hydraulic Radius for Channel equation looks like with Units.

Here is how the Diameter of Section given Hydraulic Radius for Channel equation looks like.

5.0888 = \frac{1.25}{0.25 \cdot (1 - (\frac{\sin (3.14)}{(\frac{180}{3.1416}) \cdot 3.14}))}

5.0888m = \frac{1.25m}{0.25 \cdot (1 - (\frac{\sin (3.14°)}{(\frac{180}{3.1416}) \cdot 3.14°}))}

5.0888 = \frac{1.25}{0.25 \cdot (1 - (\frac{\sin (3.14)}{(\frac{180}{3.1416}) \cdot 3.14}))}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Hydraulics and Waterworks » fx Diameter of Section given Hydraulic Radius for Channel

Diameter of Section given Hydraulic Radius for Channel Solution

Follow our step by step solution on how to calculate Diameter of Section given Hydraulic Radius for Channel?

FIRST Step Consider the formula

d section = \frac{R h(cir)}{0.25 \cdot (1 - (\frac{\sin (θ Angle)}{(\frac{180}{π}) \cdot θ Angle}))}

Next Step Substitute values of Variables

∴

d section = \frac{1.25m}{0.25 \cdot (1 - (\frac{\sin (3.14°)}{(\frac{180}{π}) \cdot 3.14°}))}

Next Step Substitute values of Constants

∴

d section = \frac{1.25m}{0.25 \cdot (1 - (\frac{\sin (3.14°)}{(\frac{180}{3.1416}) \cdot 3.14°}))}

Next Step Convert Units

∴

d section = \frac{1.25m}{0.25 \cdot (1 - (\frac{\sin (0.0548rad)}{(\frac{180}{3.1416}) \cdot 0.0548rad}))}

Next Step Prepare to Evaluate

∴

d section = \frac{1.25}{0.25 \cdot (1 - (\frac{\sin (0.0548)}{(\frac{180}{3.1416}) \cdot 0.0548}))}

Next Step Evaluate

∴

d section = 5.08877136352652m

LAST Step Rounding Answer

∴

d section = 5.0888m

Diameter of Section given Hydraulic Radius for Channel Formula Elements

Variables

Constants

Functions

Diameter of Section

The Diameter of Section refers to the length of the segment that passes through the center of the circle and touches two points on the edge of the circle.

Symbol: d_section

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Diameter of Section

Hydraulic Radius of Circular Channel

Hydraulic Radius of Circular Channel is the ratio of the cross-sectional area of a channel or pipe in which a fluid is flowing to the wet perimeter of the conduit.

Symbol: R_h(cir)

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Hydraulic Radius of Circular Channel

Subtended Angle in Radians

Subtended Angle in Radians is the angle made by something from a given viewpoint.

Symbol: θ_Angle

Measurement: AngleUnit: °

Note: Value should be greater than 0.

Formulas to find Subtended Angle in Radians

Archimedes' constant

Archimedes' constant is a mathematical constant that represents the ratio of the circumference of a circle to its diameter.

Symbol: π

Value: 3.14159265358979323846264338327950288

sin

Sine is a trigonometric function that describes the ratio of the length of the opposite side of a right triangle to the length of the hypotenuse.

Syntax: sin(Angle)

Other Formulas to find Diameter of Section

Go Diameter of Section given Wetted Area

d section = \sqrt{\frac{(\frac{180}{π}) \cdot (θ Angle) - (8 \cdot A w(cir))}{\sin (θ Angle)}}

Go Diameter of Section given Wetted Perimeter

d section = \frac{p}{0.5 \cdot θ Angle \cdot (\frac{180}{π})}

Go Diameter of Section given Top Width

d section = \frac{T cir}{\sin (\frac{θ Angle}{2})}

Go Diameter of Section given Hydraulic Depth

d section = \frac{D cir}{0.125 \cdot ((θ Angle \cdot (\frac{180}{π})) - \frac{\sin (θ Angle)}{\sin (\frac{θ Angle}{2})})}

Other formulas in Geometrical Properties of Circular Channel Section category

Go Wetted Area for Circle

A w(cir) = (\frac{1}{8}) \cdot ((\frac{180}{π}) \cdot θ Angle - \sin (θ Angle) \cdot ({d section}^{2}))

Go Angle of Sector given Wetted Perimeter

θ Angle = \frac{p}{0.5 \cdot d section} \cdot (\frac{π}{180})

Go Wetted Perimeter for circle

p = 0.5 \cdot θ Angle \cdot d section \cdot \frac{180}{π}

Go Hydraulic Radius given Angle

R h(cir) = 0.25 \cdot d section \cdot (1 - \frac{\sin (θ Angle)}{\frac{180}{π}} \cdot θ Angle)

How to Evaluate Diameter of Section given Hydraulic Radius for Channel?

Diameter of Section given Hydraulic Radius for Channel evaluator uses Diameter of Section = Hydraulic Radius of Circular Channel/(0.25*(1-(sin(Subtended Angle in Radians)/((180/pi)*Subtended Angle in Radians)))) to evaluate the Diameter of Section, Diameter of Section given Hydraulic Radius for Channel formula is defined as The diameter of a circular channel can be determined when the hydraulic radius, which is the cross-sectional area divided by the wetted perimeter, is known. Diameter of Section is denoted by d_section symbol.

How to evaluate Diameter of Section given Hydraulic Radius for Channel using this online evaluator? To use this online evaluator for Diameter of Section given Hydraulic Radius for Channel, enter Hydraulic Radius of Circular Channel (R_h(cir)) & Subtended Angle in Radians (θ_Angle) and hit the calculate button.

FAQs on Diameter of Section given Hydraulic Radius for Channel

What is the formula to find Diameter of Section given Hydraulic Radius for Channel?

The formula of Diameter of Section given Hydraulic Radius for Channel is expressed as Diameter of Section = Hydraulic Radius of Circular Channel/(0.25*(1-(sin(Subtended Angle in Radians)/((180/pi)*Subtended Angle in Radians)))). Here is an example- 5.088771 = 1.25/(0.25*(1-(sin(0.0548033385126116)/((180/pi)*0.0548033385126116)))).

How to calculate Diameter of Section given Hydraulic Radius for Channel?

With Hydraulic Radius of Circular Channel (R_h(cir)) & Subtended Angle in Radians (θ_Angle) we can find Diameter of Section given Hydraulic Radius for Channel using the formula - Diameter of Section = Hydraulic Radius of Circular Channel/(0.25*(1-(sin(Subtended Angle in Radians)/((180/pi)*Subtended Angle in Radians)))). This formula also uses Archimedes' constant and Sine (sin) function(s).

What are the other ways to Calculate Diameter of Section?

Here are the different ways to Calculate Diameter of Section-

Diameter of Section=sqrt(((180/pi)*(Subtended Angle in Radians)-(8*Wetted Surface Area of Circular Channel))/sin(Subtended Angle in Radians))
Diameter of Section=Wetted Perimeter of Channel/(0.5*Subtended Angle in Radians*(180/pi))
Diameter of Section=Top Width of Circular Channel/sin(Subtended Angle in Radians/2)

Can the Diameter of Section given Hydraulic Radius for Channel be negative?

No, the Diameter of Section given Hydraulic Radius for Channel, measured in Length cannot be negative.

Which unit is used to measure Diameter of Section given Hydraulic Radius for Channel?

Diameter of Section given Hydraulic Radius for Channel is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Diameter of Section given Hydraulic Radius for Channel can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Diameter of Section given Hydraulic Radius for Channel Formula

​GoDiameter of Section given Wetted Area Formula

​GoDiameter of Section given Wetted Perimeter Formula

Diameter of Section given Hydraulic Radius for Channel Example

Diameter of Section given Hydraulic Radius for Channel Solution

Diameter of Section given Hydraulic Radius for Channel Formula Elements

Other Formulas to find Diameter of Section

Other formulas in Geometrical Properties of Circular Channel Section category

How to Evaluate Diameter of Section given Hydraulic Radius for Channel?

FAQs on Diameter of Section given Hydraulic Radius for Channel

Variable Name

GoDiameter of Section given Wetted Area Formula

GoDiameter of Section given Wetted Perimeter Formula