FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Diameter of rivet given safe tensile load that plate can withstand Formula

Fx Copy

LaTeX Copy

Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long. Check FAQs

D rivet = p - (\frac{P load}{σ t \cdot t plate})

D_rivet - Rivet Diameter?p - Pitch of Rivet?P_load - Tensile Load?σ_t - Tensile Stress?t_plate - Thickness of Plate?

Diameter of rivet given safe tensile load that plate can withstand Example

With values

With units

Only example

Here is how the Diameter of rivet given safe tensile load that plate can withstand equation looks like with Values.

Here is how the Diameter of rivet given safe tensile load that plate can withstand equation looks like with Units.

Here is how the Diameter of rivet given safe tensile load that plate can withstand equation looks like.

14.2197 = 20 - (\frac{0.012}{0.173 \cdot 12})

14.2197mm = 20mm - (\frac{0.012kN}{0.173MPa \cdot 12mm})

14.2197 = 20 - (\frac{0.012}{0.173 \cdot 12})

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Strength of Materials » fx Diameter of rivet given safe tensile load that plate can withstand

Diameter of rivet given safe tensile load that plate can withstand Solution

Follow our step by step solution on how to calculate Diameter of rivet given safe tensile load that plate can withstand?

FIRST Step Consider the formula

D rivet = p - (\frac{P load}{σ t \cdot t plate})

Next Step Substitute values of Variables

∴

D rivet = 20mm - (\frac{0.012kN}{0.173MPa \cdot 12mm})

Next Step Convert Units

∴

D rivet = 0.02m - (\frac{12N}{173000Pa \cdot 0.012m})

Next Step Prepare to Evaluate

∴

D rivet = 0.02 - (\frac{12}{173000 \cdot 0.012})

Next Step Evaluate

∴

D rivet = 0.0142196531791908m

Next Step Convert to Output's Unit

∴

D rivet = 14.2196531791908mm

LAST Step Rounding Answer

∴

D rivet = 14.2197mm

Diameter of rivet given safe tensile load that plate can withstand Formula Elements

Variables

Rivet Diameter

Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.

Symbol: D_rivet

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Rivet Diameter

Pitch of Rivet

Pitch of Rivet is defined as the distance between the centers of adjacent rivets that hold together the parts of a built member.

Symbol: p

Measurement: LengthUnit: mm

Note: Value can be positive or negative.

Formulas to find Pitch of Rivet

Tensile Load

Tensile Load is the stretching force acting on the material and generally results in tensile stress and tensile strain in the specimen.

Symbol: P_load

Measurement: ForceUnit: kN

Note: Value can be positive or negative.

Formulas to find Tensile Load

Tensile Stress

Tensile stress can be defined as the magnitude of force applied along an elastic rod, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force.

Symbol: σ_t

Measurement: PressureUnit: MPa

Note: Value should be greater than 0.

Formulas to find Tensile Stress

Thickness of Plate

The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.

Symbol: t_plate

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Thickness of Plate

Other formulas in Failure Due to Tearing of the Plate Between Rivets of a Row category

Go Safe tensile load that plate can withstand given area of plate

P load = σ t \cdot A b

Go Safe tensile stress given area of base plate and tensile load

σ t = \frac{P load}{A b}

Go Area of plate for given safe tensile load that plate can withstand

A b = \frac{P load}{σ t}

Go Safe tensile load that plate can withstand

P load = σ t \cdot (p - D rivet) \cdot t plate

How to Evaluate Diameter of rivet given safe tensile load that plate can withstand?

Diameter of rivet given safe tensile load that plate can withstand evaluator uses Rivet Diameter = Pitch of Rivet-(Tensile Load/(Tensile Stress*Thickness of Plate)) to evaluate the Rivet Diameter, The Diameter of rivet given safe tensile load that plate can withstand formula is defined as a chord that runs through the center point of the rivet. It is the longest possible chord of any rivet. The center of a rivet is the midpoint of its diameter. Rivet Diameter is denoted by D_rivet symbol.

How to evaluate Diameter of rivet given safe tensile load that plate can withstand using this online evaluator? To use this online evaluator for Diameter of rivet given safe tensile load that plate can withstand, enter Pitch of Rivet (p), Tensile Load (P_load), Tensile Stress (σ_t) & Thickness of Plate (t_plate) and hit the calculate button.

FAQs on Diameter of rivet given safe tensile load that plate can withstand

What is the formula to find Diameter of rivet given safe tensile load that plate can withstand?

The formula of Diameter of rivet given safe tensile load that plate can withstand is expressed as Rivet Diameter = Pitch of Rivet-(Tensile Load/(Tensile Stress*Thickness of Plate)). Here is an example- -4609094.412331 = 0.02-(12/(173000*0.012)).

How to calculate Diameter of rivet given safe tensile load that plate can withstand?

With Pitch of Rivet (p), Tensile Load (P_load), Tensile Stress (σ_t) & Thickness of Plate (t_plate) we can find Diameter of rivet given safe tensile load that plate can withstand using the formula - Rivet Diameter = Pitch of Rivet-(Tensile Load/(Tensile Stress*Thickness of Plate)).

Can the Diameter of rivet given safe tensile load that plate can withstand be negative?

No, the Diameter of rivet given safe tensile load that plate can withstand, measured in Length cannot be negative.

Which unit is used to measure Diameter of rivet given safe tensile load that plate can withstand?

Diameter of rivet given safe tensile load that plate can withstand is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Diameter of rivet given safe tensile load that plate can withstand can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Diameter of rivet given safe tensile load that plate can withstand Formula

Diameter of rivet given safe tensile load that plate can withstand Example

Diameter of rivet given safe tensile load that plate can withstand Solution

Diameter of rivet given safe tensile load that plate can withstand Formula Elements

Other formulas in Failure Due to Tearing of the Plate Between Rivets of a Row category

How to Evaluate Diameter of rivet given safe tensile load that plate can withstand?

FAQs on Diameter of rivet given safe tensile load that plate can withstand

Variable Name