FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Diameter of rivet given margin Formula

Fx Copy

LaTeX Copy

Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long. Check FAQs

D rivet = \frac{m}{1.5}

D_rivet - Rivet Diameter?m - Margin of Rivet?

Diameter of rivet given margin Example

With values

With units

Only example

Here is how the Diameter of rivet given margin equation looks like with Values.

Here is how the Diameter of rivet given margin equation looks like with Units.

Here is how the Diameter of rivet given margin equation looks like.

18 = \frac{27}{1.5}

18mm = \frac{27mm}{1.5}

18 = \frac{27}{1.5}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Strength of Materials » fx Diameter of rivet given margin

Diameter of rivet given margin Solution

Follow our step by step solution on how to calculate Diameter of rivet given margin?

FIRST Step Consider the formula

D rivet = \frac{m}{1.5}

Next Step Substitute values of Variables

∴

D rivet = \frac{27mm}{1.5}

Next Step Convert Units

∴

D rivet = \frac{0.027m}{1.5}

Next Step Prepare to Evaluate

∴

D rivet = \frac{0.027}{1.5}

Next Step Evaluate

∴

D rivet = 0.018m

LAST Step Convert to Output's Unit

∴

D rivet = 18mm

Diameter of rivet given margin Formula Elements

Variables

Rivet Diameter

Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.

Symbol: D_rivet

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Rivet Diameter

Margin of Rivet

Margin of Rivet is defined as the distance between the edge of the plate to the centreline of rivets in the nearest row.

Symbol: m

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Margin of Rivet

Other formulas in Failure Due to Tearing of the Plate Between the Rivet Hole and Edge category

Go Margin given diameter of rivet

m = 1.5 \cdot D rivet

How to Evaluate Diameter of rivet given margin?

Diameter of rivet given margin evaluator uses Rivet Diameter = Margin of Rivet/1.5 to evaluate the Rivet Diameter, The Diameter of rivet given margin formula is defined as a chord that runs through the center point of the rivet. It is the longest possible chord of any rivet. The center of a rivet is the midpoint of its diameter. Rivet Diameter is denoted by D_rivet symbol.

How to evaluate Diameter of rivet given margin using this online evaluator? To use this online evaluator for Diameter of rivet given margin, enter Margin of Rivet (m) and hit the calculate button.

FAQs on Diameter of rivet given margin

What is the formula to find Diameter of rivet given margin?

The formula of Diameter of rivet given margin is expressed as Rivet Diameter = Margin of Rivet/1.5. Here is an example- 18000 = 0.027/1.5.

How to calculate Diameter of rivet given margin?

With Margin of Rivet (m) we can find Diameter of rivet given margin using the formula - Rivet Diameter = Margin of Rivet/1.5.

Can the Diameter of rivet given margin be negative?

No, the Diameter of rivet given margin, measured in Length cannot be negative.

Which unit is used to measure Diameter of rivet given margin?

Diameter of rivet given margin is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Diameter of rivet given margin can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!