FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Depth of Water in Well 1 given Drawdown in Well 1 Formula

Fx Copy

LaTeX Copy

Depth of Water in Well 1 refers to the vertical distance from the ground surface to the water level within a well that taps into a confined aquifer. Check FAQs

h 1 = H - s 1

h₁ - Depth of Water in Well 1?H - Thickness of Aquifer?s₁ - Drawdown in Well 1?

Depth of Water in Well 1 given Drawdown in Well 1 Example

With values

With units

Only example

Here is how the Depth of Water in Well 1 given Drawdown in Well 1 equation looks like with Values.

Here is how the Depth of Water in Well 1 given Drawdown in Well 1 equation looks like with Units.

Here is how the Depth of Water in Well 1 given Drawdown in Well 1 equation looks like.

17.85 = 20 - 2.15

17.85m = 20m - 2.15m

17.85 = 20 - 2.15

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Environmental Engineering » fx Depth of Water in Well 1 given Drawdown in Well 1

Depth of Water in Well 1 given Drawdown in Well 1 Solution

Follow our step by step solution on how to calculate Depth of Water in Well 1 given Drawdown in Well 1?

FIRST Step Consider the formula

h 1 = H - s 1

Next Step Substitute values of Variables

∴

h 1 = 20m - 2.15m

Next Step Prepare to Evaluate

∴

h 1 = 20 - 2.15

LAST Step Evaluate

∴

h 1 = 17.85m

Depth of Water in Well 1 given Drawdown in Well 1 Formula Elements

Variables

Depth of Water in Well 1

Depth of Water in Well 1 refers to the vertical distance from the ground surface to the water level within a well that taps into a confined aquifer.

Symbol: h₁

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Depth of Water in Well 1

Thickness of Aquifer

Thickness of aquifer refers to the vertical distance between the top and bottom boundaries of the water-bearing layer, typically measured from the confining bed above to the confining bed below.

Symbol: H

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Thickness of Aquifer

Drawdown in Well 1

Drawdown in Well 1 refers to the reduction in water level caused by pumping in a well.

Symbol: s₁

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Drawdown in Well 1

Other formulas in Aquifer Constant And Depth of Water in Well category

Go Depth of Water in Well 2 given Drawdown in Well 2

h 2 = H - s 2

Go Aquifer Constant

T = \frac{Q w \cdot \log ((\frac{r 2}{r 1}), 10)}{2.72 \cdot (s 1 - s 2)}

Go Confined Aquifer Discharge given Aquifer Constant

Q w = \frac{T \cdot 2.72 \cdot (s 1 - s 2)}{\log ((\frac{r 2}{r 1}), 10)}

Go Aquifer Constant given Drawdown in Well

T = \frac{Q w}{2.72 \cdot (s 1 - s 2)}

How to Evaluate Depth of Water in Well 1 given Drawdown in Well 1?

Depth of Water in Well 1 given Drawdown in Well 1 evaluator uses Depth of Water in Well 1 = Thickness of Aquifer-Drawdown in Well 1 to evaluate the Depth of Water in Well 1, Depth of Water in Well 1 given Drawdown in Well 1 is defined as the vertical distance from the ground surface to the water level in a well, which is affected by the drawdown of water in the same well, providing valuable information for confined aquifer systems. Depth of Water in Well 1 is denoted by h₁ symbol.

How to evaluate Depth of Water in Well 1 given Drawdown in Well 1 using this online evaluator? To use this online evaluator for Depth of Water in Well 1 given Drawdown in Well 1, enter Thickness of Aquifer (H) & Drawdown in Well 1 (s₁) and hit the calculate button.

FAQs on Depth of Water in Well 1 given Drawdown in Well 1

What is the formula to find Depth of Water in Well 1 given Drawdown in Well 1?

The formula of Depth of Water in Well 1 given Drawdown in Well 1 is expressed as Depth of Water in Well 1 = Thickness of Aquifer-Drawdown in Well 1. Here is an example- 17.85 = 20-2.15.

How to calculate Depth of Water in Well 1 given Drawdown in Well 1?

With Thickness of Aquifer (H) & Drawdown in Well 1 (s₁) we can find Depth of Water in Well 1 given Drawdown in Well 1 using the formula - Depth of Water in Well 1 = Thickness of Aquifer-Drawdown in Well 1.

Can the Depth of Water in Well 1 given Drawdown in Well 1 be negative?

No, the Depth of Water in Well 1 given Drawdown in Well 1, measured in Length cannot be negative.

Which unit is used to measure Depth of Water in Well 1 given Drawdown in Well 1?

Depth of Water in Well 1 given Drawdown in Well 1 is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Depth of Water in Well 1 given Drawdown in Well 1 can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Depth of Water in Well 1 given Drawdown in Well 1 Formula

Depth of Water in Well 1 given Drawdown in Well 1 Example

Depth of Water in Well 1 given Drawdown in Well 1 Solution

Depth of Water in Well 1 given Drawdown in Well 1 Formula Elements

Other formulas in Aquifer Constant And Depth of Water in Well category

How to Evaluate Depth of Water in Well 1 given Drawdown in Well 1?

FAQs on Depth of Water in Well 1 given Drawdown in Well 1

Variable Name