FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Depth of Stiffener Lip Formula

Fx Copy

LaTeX Copy

Depth of Stiffener Lip is the overall distance of the extra lip given for the member in order to stiffen the structure. Check FAQs

d = 2.8 \cdot t \cdot {({(w t)}^{2} - 144)}^{\frac{1}{6}}

d - Depth of Stiffener Lip?t - Thickness of Steel Compression Element?w_t - Flat Width Ratio?

Depth of Stiffener Lip Example

With values

With units

Only example

Here is how the Depth of Stiffener Lip equation looks like with Values.

Here is how the Depth of Stiffener Lip equation looks like with Units.

Here is how the Depth of Stiffener Lip equation looks like.

143.638 = 2.8 \cdot 30 \cdot {({(13)}^{2} - 144)}^{\frac{1}{6}}

143.638mm = 2.8 \cdot 30mm \cdot {({(13)}^{2} - 144)}^{\frac{1}{6}}

143.638 = 2.8 \cdot 30 \cdot {({(13)}^{2} - 144)}^{\frac{1}{6}}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Design of Steel Structures » fx Depth of Stiffener Lip

Depth of Stiffener Lip Solution

Follow our step by step solution on how to calculate Depth of Stiffener Lip?

FIRST Step Consider the formula

d = 2.8 \cdot t \cdot {({(w t)}^{2} - 144)}^{\frac{1}{6}}

Next Step Substitute values of Variables

∴

d = 2.8 \cdot 30mm \cdot {({(13)}^{2} - 144)}^{\frac{1}{6}}

Next Step Convert Units

∴

d = 2.8 \cdot 0.03m \cdot {({(13)}^{2} - 144)}^{\frac{1}{6}}

Next Step Prepare to Evaluate

∴

d = 2.8 \cdot 0.03 \cdot {({(13)}^{2} - 144)}^{\frac{1}{6}}

Next Step Evaluate

∴

d = 0.143637979520843m

Next Step Convert to Output's Unit

∴

d = 143.637979520843mm

LAST Step Rounding Answer

∴

d = 143.638mm

Depth of Stiffener Lip Formula Elements

Variables

Depth of Stiffener Lip

Depth of Stiffener Lip is the overall distance of the extra lip given for the member in order to stiffen the structure.

Symbol: d

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Depth of Stiffener Lip

Thickness of Steel Compression Element

The Thickness of Steel Compression Element is the thickness of element or plate.

Symbol: t

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Thickness of Steel Compression Element

Flat Width Ratio

Flat Width Ratio is the ratio of width w of a single flat element to the thickness t of the element.

Symbol: w_t

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Flat Width Ratio

Other formulas in Cold Formed or Light Weighted Steel Structures category

Go Allowable Design Strength

R a = \frac{R n}{f s}

Go Nominal Strength using Allowable Design Strength

R n = f s \cdot R a

Go Minimum Allowable Moment of Inertia

I min = 1.83 \cdot (t^{4}) \cdot \sqrt{({w t}^{2}) - 144}

Go Flat Width Ratio of Stiffened Element using Moment of Inertia

w t = \sqrt{{(\frac{I min}{1.83 \cdot t^{4}})}^{2} + 144}

How to Evaluate Depth of Stiffener Lip?

Depth of Stiffener Lip evaluator uses Depth of Stiffener Lip = 2.8*Thickness of Steel Compression Element*((Flat Width Ratio)^2-144)^(1/6) to evaluate the Depth of Stiffener Lip, The Depth of Stiffener Lip is defined as the overall depth of simple lip bent at right angles. The performance of unstiffened elements could be substantially improved by introducing stiffeners (such as a lip). Depth of Stiffener Lip is denoted by d symbol.

How to evaluate Depth of Stiffener Lip using this online evaluator? To use this online evaluator for Depth of Stiffener Lip, enter Thickness of Steel Compression Element (t) & Flat Width Ratio (w_t) and hit the calculate button.

FAQs on Depth of Stiffener Lip

What is the formula to find Depth of Stiffener Lip?

The formula of Depth of Stiffener Lip is expressed as Depth of Stiffener Lip = 2.8*Thickness of Steel Compression Element*((Flat Width Ratio)^2-144)^(1/6). Here is an example- 143638 = 2.8*0.03*((13)^2-144)^(1/6).

How to calculate Depth of Stiffener Lip?

With Thickness of Steel Compression Element (t) & Flat Width Ratio (w_t) we can find Depth of Stiffener Lip using the formula - Depth of Stiffener Lip = 2.8*Thickness of Steel Compression Element*((Flat Width Ratio)^2-144)^(1/6).

Can the Depth of Stiffener Lip be negative?

No, the Depth of Stiffener Lip, measured in Length cannot be negative.

Which unit is used to measure Depth of Stiffener Lip?

Depth of Stiffener Lip is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Depth of Stiffener Lip can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Depth of Stiffener Lip Formula

Depth of Stiffener Lip Example

Depth of Stiffener Lip Solution

Depth of Stiffener Lip Formula Elements

Other formulas in Cold Formed or Light Weighted Steel Structures category

How to Evaluate Depth of Stiffener Lip?

FAQs on Depth of Stiffener Lip

Variable Name