FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Depth of Root Face for Minimum Distortion of Butt Joint Formula

Fx Copy

LaTeX Copy

Depth of root face is the thickness of that portion of plate which contains root face. Check FAQs

t 3 = \frac{0.38 \cdot t 1 - 0.62 \cdot t 2}{0.12}

t₃ - Depth of Root Face?t₁ - Depth of The First V Groove?t₂ - Depth of The Last V Groove?

Depth of Root Face for Minimum Distortion of Butt Joint Example

With values

With units

Only example

Here is how the Depth of Root Face for Minimum Distortion of Butt Joint equation looks like with Values.

Here is how the Depth of Root Face for Minimum Distortion of Butt Joint equation looks like with Units.

Here is how the Depth of Root Face for Minimum Distortion of Butt Joint equation looks like.

6.485 = \frac{0.38 \cdot 6.29 - 0.62 \cdot 2.6}{0.12}

6.485mm = \frac{0.38 \cdot 6.29mm - 0.62 \cdot 2.6mm}{0.12}

6.485 = \frac{0.38 \cdot 6.29 - 0.62 \cdot 2.6}{0.12}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Production Engineering » Category

Welding » fx Depth of Root Face for Minimum Distortion of Butt Joint

Depth of Root Face for Minimum Distortion of Butt Joint Solution

Follow our step by step solution on how to calculate Depth of Root Face for Minimum Distortion of Butt Joint?

FIRST Step Consider the formula

t 3 = \frac{0.38 \cdot t 1 - 0.62 \cdot t 2}{0.12}

Next Step Substitute values of Variables

∴

t 3 = \frac{0.38 \cdot 6.29mm - 0.62 \cdot 2.6mm}{0.12}

Next Step Convert Units

∴

t 3 = \frac{0.38 \cdot 0.0063m - 0.62 \cdot 0.0026m}{0.12}

Next Step Prepare to Evaluate

∴

t 3 = \frac{0.38 \cdot 0.0063 - 0.62 \cdot 0.0026}{0.12}

Next Step Evaluate

∴

t 3 = 0.006485m

LAST Step Convert to Output's Unit

∴

t 3 = 6.485mm

Depth of Root Face for Minimum Distortion of Butt Joint Formula Elements

Variables

Depth of Root Face

Depth of root face is the thickness of that portion of plate which contains root face.

Symbol: t₃

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Depth of Root Face

Depth of The First V Groove

Depth of The First V Groove is the depth from surface of plate to the root face.

Symbol: t₁

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Depth of The First V Groove

Depth of The Last V Groove

Depth of The Last V Groove is the distance from the bottom of the plate to root face.

Symbol: t₂

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Depth of The Last V Groove

Other formulas in Butt Joints category

Go Transverse Shrinkage in Butt Joints

S b = (5.08 \cdot (\frac{A w}{p tb})) + (1.27 \cdot d)

Go Plate Thickness for given Transverse Shrinkage in Butt Joints

p tb = \frac{5.08 \cdot A w}{S b - (1.27 \cdot d)}

Go Cross-sectional area of weld for given transverse shrinkage in butt joints

A w = \frac{p tb \cdot (S b - 1.27 \cdot d)}{5.08}

Go Total Transverse Shrinkage during Multi-Pass Welding of Butt Joint

S t = S 0 + b \cdot (\log 10 (\frac{w}{w 0}))

How to Evaluate Depth of Root Face for Minimum Distortion of Butt Joint?

Depth of Root Face for Minimum Distortion of Butt Joint evaluator uses Depth of Root Face = (0.38*Depth of The First V Groove-0.62*Depth of The Last V Groove)/0.12 to evaluate the Depth of Root Face, Depth of Root Face for Minimum Distortion of Butt Joint formula is defined as the part of plate thickness which contains the root face which is prepared for butt joint. Depth of Root Face is denoted by t₃ symbol.

How to evaluate Depth of Root Face for Minimum Distortion of Butt Joint using this online evaluator? To use this online evaluator for Depth of Root Face for Minimum Distortion of Butt Joint, enter Depth of The First V Groove (t₁) & Depth of The Last V Groove (t₂) and hit the calculate button.

FAQs on Depth of Root Face for Minimum Distortion of Butt Joint

What is the formula to find Depth of Root Face for Minimum Distortion of Butt Joint?

The formula of Depth of Root Face for Minimum Distortion of Butt Joint is expressed as Depth of Root Face = (0.38*Depth of The First V Groove-0.62*Depth of The Last V Groove)/0.12. Here is an example- 6485 = (0.38*0.00629-0.62*0.0026)/0.12.

How to calculate Depth of Root Face for Minimum Distortion of Butt Joint?

With Depth of The First V Groove (t₁) & Depth of The Last V Groove (t₂) we can find Depth of Root Face for Minimum Distortion of Butt Joint using the formula - Depth of Root Face = (0.38*Depth of The First V Groove-0.62*Depth of The Last V Groove)/0.12.

Can the Depth of Root Face for Minimum Distortion of Butt Joint be negative?

No, the Depth of Root Face for Minimum Distortion of Butt Joint, measured in Length cannot be negative.

Which unit is used to measure Depth of Root Face for Minimum Distortion of Butt Joint?

Depth of Root Face for Minimum Distortion of Butt Joint is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Depth of Root Face for Minimum Distortion of Butt Joint can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Depth of Root Face for Minimum Distortion of Butt Joint Formula

Depth of Root Face for Minimum Distortion of Butt Joint Example

Depth of Root Face for Minimum Distortion of Butt Joint Solution

Depth of Root Face for Minimum Distortion of Butt Joint Formula Elements

Other formulas in Butt Joints category

How to Evaluate Depth of Root Face for Minimum Distortion of Butt Joint?

FAQs on Depth of Root Face for Minimum Distortion of Butt Joint

Variable Name