FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Depth of Reference Filter using Treatability Constant Formula

Fx Copy

LaTeX Copy

The Depth of Reference Filter refers to the standard vertical distance used to compare filtration systems, typically measured in meters (m), to assess relative performance. Check FAQs

D 1 = D 2 \cdot {(\frac{K 30/25}{K 30/20})}^{\frac{1}{a}}

D₁ - Depth of Reference Filter?D₂ - Depth of Actual Filter?K_30/25 - Treatability Constant at 30°C and 25ft Depth?K_30/20 - Treatability Constant at 30°C and 20ft Depth?a - Empirical Constant?

Depth of Reference Filter using Treatability Constant Example

With values

With units

Only example

Here is how the Depth of Reference Filter using Treatability Constant equation looks like with Values.

Here is how the Depth of Reference Filter using Treatability Constant equation looks like with Units.

Here is how the Depth of Reference Filter using Treatability Constant equation looks like.

6.1052 = 7.6 \cdot {(\frac{26.8}{28.62})}^{\frac{1}{0.3}}

6.1052m = 7.6m \cdot {(\frac{26.8}{28.62})}^{\frac{1}{0.3}}

6.1052 = 7.6 \cdot {(\frac{26.8}{28.62})}^{\frac{1}{0.3}}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Environmental Engineering » fx Depth of Reference Filter using Treatability Constant

Depth of Reference Filter using Treatability Constant Solution

Follow our step by step solution on how to calculate Depth of Reference Filter using Treatability Constant?

FIRST Step Consider the formula

D 1 = D 2 \cdot {(\frac{K 30/25}{K 30/20})}^{\frac{1}{a}}

Next Step Substitute values of Variables

∴

D 1 = 7.6m \cdot {(\frac{26.8}{28.62})}^{\frac{1}{0.3}}

Next Step Prepare to Evaluate

∴

D 1 = 7.6 \cdot {(\frac{26.8}{28.62})}^{\frac{1}{0.3}}

Next Step Evaluate

∴

D 1 = 6.1051659627612m

LAST Step Rounding Answer

∴

D 1 = 6.1052m

Depth of Reference Filter using Treatability Constant Formula Elements

Variables

Depth of Reference Filter

The Depth of Reference Filter refers to the standard vertical distance used to compare filtration systems, typically measured in meters (m), to assess relative performance.

Symbol: D₁

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Depth of Reference Filter

Depth of Actual Filter

The Depth of Actual Filter refers to the vertical distance from the top surface to the bottom of the filter media, impacting filtration efficiency, typically measured in meters (m).

Symbol: D₂

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Depth of Actual Filter

Treatability Constant at 30°C and 25ft Depth

The Treatability Constant at 30°C and 25ft depth refers to a rate coefficient indicating the effectiveness of a treatment process at the standard temperature of 30°C at 25ft filter depth.

Symbol: K_30/25

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Treatability Constant at 30°C and 25ft Depth

Treatability Constant at 30°C and 20ft Depth

The Treatability Constant at 30°C and 20ft depth refers to a rate coefficient indicating the effectiveness of a treatment process at the standard temperature of 30°C at 20ft filter depth.

Symbol: K_30/20

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Treatability Constant at 30°C and 20ft Depth

Empirical Constant

The Empirical Constant refers to a value derived from experimental data and observations, used in equations to predict or describe phenomena within specific conditions.

Symbol: a

Measurement: NAUnit: Unitless

Note: Value can be positive or negative.

Formulas to find Empirical Constant

Other formulas in Treatability Constant category

Go Treatability Constant at 30 degrees Celsius and 20 ft Filter Depth

K 30/20 = K 20/20 \cdot {(θ)}^{T - 20}

Go Treatability Constant at 20 Degrees Celsius and 20 ft Filter Depth

K 20/20 = \frac{K 30/20}{{(θ)}^{T - 20}}

Go Temperature Activity Coefficient given Treatability Constant

θ = {(\frac{K 30/20}{K 20/20})}^{\frac{1}{T - 20}}

Go Wastewater Temperature using Treatability Constant

T = 20 + (\ln (\frac{K 30/20}{K 20/20}) \cdot (\frac{1}{\ln (θ)}))

How to Evaluate Depth of Reference Filter using Treatability Constant?

Depth of Reference Filter using Treatability Constant evaluator uses Depth of Reference Filter = Depth of Actual Filter*(Treatability Constant at 30°C and 25ft Depth/Treatability Constant at 30°C and 20ft Depth)^(1/Empirical Constant) to evaluate the Depth of Reference Filter, The Depth of Reference Filter using Treatability Constant is defined as the standard vertical distance used for comparison in filtration systems, typically measured in meters (m), to assess relative performance. Depth of Reference Filter is denoted by D₁ symbol.

How to evaluate Depth of Reference Filter using Treatability Constant using this online evaluator? To use this online evaluator for Depth of Reference Filter using Treatability Constant, enter Depth of Actual Filter (D₂), Treatability Constant at 30°C and 25ft Depth (K_30/25), Treatability Constant at 30°C and 20ft Depth (K_30/20) & Empirical Constant (a) and hit the calculate button.

FAQs on Depth of Reference Filter using Treatability Constant

What is the formula to find Depth of Reference Filter using Treatability Constant?

The formula of Depth of Reference Filter using Treatability Constant is expressed as Depth of Reference Filter = Depth of Actual Filter*(Treatability Constant at 30°C and 25ft Depth/Treatability Constant at 30°C and 20ft Depth)^(1/Empirical Constant). Here is an example- 6.744225 = 7.6*(26.8/28.62)^(1/0.3).

How to calculate Depth of Reference Filter using Treatability Constant?

With Depth of Actual Filter (D₂), Treatability Constant at 30°C and 25ft Depth (K_30/25), Treatability Constant at 30°C and 20ft Depth (K_30/20) & Empirical Constant (a) we can find Depth of Reference Filter using Treatability Constant using the formula - Depth of Reference Filter = Depth of Actual Filter*(Treatability Constant at 30°C and 25ft Depth/Treatability Constant at 30°C and 20ft Depth)^(1/Empirical Constant).

Can the Depth of Reference Filter using Treatability Constant be negative?

No, the Depth of Reference Filter using Treatability Constant, measured in Length cannot be negative.

Which unit is used to measure Depth of Reference Filter using Treatability Constant?

Depth of Reference Filter using Treatability Constant is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Depth of Reference Filter using Treatability Constant can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Depth of Reference Filter using Treatability Constant Formula

Depth of Reference Filter using Treatability Constant Example

Depth of Reference Filter using Treatability Constant Solution

Depth of Reference Filter using Treatability Constant Formula Elements

Other formulas in Treatability Constant category

How to Evaluate Depth of Reference Filter using Treatability Constant?

FAQs on Depth of Reference Filter using Treatability Constant

Variable Name