FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Depth of machined surface given taper Formula

GoDepth of machined surface Formula

Fx Copy

LaTeX Copy

Depth of machined surface is the how deep a surface is machined from the un-machined surface. Check FAQs

H sd = \frac{D sd - d}{2 \cdot T sd}

H_sd - Depth of Machined Surface?D_sd - Larger Diameter?d - Smaller Diameter?T_sd - Taper Produced in EDM?

Depth of machined surface given taper Example

With values

With units

Only example

Here is how the Depth of machined surface given taper equation looks like with Values.

Here is how the Depth of machined surface given taper equation looks like with Units.

Here is how the Depth of machined surface given taper equation looks like.

52 = \frac{22 - 1.2}{2 \cdot 0.2}

52m = \frac{22m - 1.2m}{2 \cdot 0.2}

52 = \frac{22 - 1.2}{2 \cdot 0.2}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Production Engineering » Category

Unconventional machining processes » fx Depth of machined surface given taper

Depth of machined surface given taper Solution

Follow our step by step solution on how to calculate Depth of machined surface given taper?

FIRST Step Consider the formula

H sd = \frac{D sd - d}{2 \cdot T sd}

Next Step Substitute values of Variables

∴

H sd = \frac{22m - 1.2m}{2 \cdot 0.2}

Next Step Prepare to Evaluate

∴

H sd = \frac{22 - 1.2}{2 \cdot 0.2}

LAST Step Evaluate

∴

H sd = 52m

Depth of machined surface given taper Formula Elements

Variables

Depth of Machined Surface

Depth of machined surface is the how deep a surface is machined from the un-machined surface.

Symbol: H_sd

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Depth of Machined Surface

Larger Diameter

Larger diameter is the bigger diameter of hole or other things.

Symbol: D_sd

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Larger Diameter

Smaller Diameter

The smaller diameter is the smaller of all diameters of a given object.

Symbol: d

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Smaller Diameter

Taper Produced in EDM

Taper produced in EDM is the taper produced due to side sparks during EDM.

Symbol: T_sd

Measurement: NAUnit: Unitless

Note: Value can be positive or negative.

Formulas to find Taper Produced in EDM

Other Formulas to find Depth of Machined Surface

Go Depth of machined surface

H sd = \frac{D sd - d}{2 \cdot K T \cdot d^{2}}

Other formulas in Taper Formation category

Go Taper produced due to side sparks

T sd = K T \cdot d^{2}

Go Upper diameter of hole

D sd = 2 \cdot H sd \cdot K T \cdot d^{2} + d

Go Empirical constant for taper

K T = \frac{D sd - d}{2 \cdot H sd \cdot d^{2}}

Go Smallest diameter of hole given empirical constant

d = \sqrt{\frac{T sd}{K T}}

How to Evaluate Depth of machined surface given taper?

Depth of machined surface given taper evaluator uses Depth of Machined Surface = (Larger Diameter-Smaller Diameter)/(2*Taper Produced in EDM) to evaluate the Depth of Machined Surface, Depth of machined surface given taper formula is defined as perpendicular distance between machined and un-machined surface during EDM. Depth of Machined Surface is denoted by H_sd symbol.

How to evaluate Depth of machined surface given taper using this online evaluator? To use this online evaluator for Depth of machined surface given taper, enter Larger Diameter (D_sd), Smaller Diameter (d) & Taper Produced in EDM (T_sd) and hit the calculate button.

FAQs on Depth of machined surface given taper

What is the formula to find Depth of machined surface given taper?

The formula of Depth of machined surface given taper is expressed as Depth of Machined Surface = (Larger Diameter-Smaller Diameter)/(2*Taper Produced in EDM). Here is an example- 52 = (22-1.2)/(2*0.2).

How to calculate Depth of machined surface given taper?

With Larger Diameter (D_sd), Smaller Diameter (d) & Taper Produced in EDM (T_sd) we can find Depth of machined surface given taper using the formula - Depth of Machined Surface = (Larger Diameter-Smaller Diameter)/(2*Taper Produced in EDM).

What are the other ways to Calculate Depth of Machined Surface?

Here are the different ways to Calculate Depth of Machined Surface-

Depth of Machined Surface=(Larger Diameter-Smaller Diameter)/(2*Empirical Constant*Smaller Diameter^2)

Can the Depth of machined surface given taper be negative?

No, the Depth of machined surface given taper, measured in Length cannot be negative.

Which unit is used to measure Depth of machined surface given taper?

Depth of machined surface given taper is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Depth of machined surface given taper can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Depth of machined surface given taper Formula

​GoDepth of machined surface Formula

Depth of machined surface given taper Example

Depth of machined surface given taper Solution

Depth of machined surface given taper Formula Elements

Other Formulas to find Depth of Machined Surface

Other formulas in Taper Formation category

How to Evaluate Depth of machined surface given taper?

FAQs on Depth of machined surface given taper

Variable Name

GoDepth of machined surface Formula