FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Depth at Gauging Station Formula

Fx Copy

LaTeX Copy

Depth at Gauging Station where the hydraulics of a downstream control and a gauging station are considered. Check FAQs

h G = h csf + H c \cdot (Q) + {Q 2}^{2}

h_G - Depth at Gauging Station?h_csf - Cease-to-Flow Depth?H_c - Head at Control?Q - Discharge?Q² - Terms of Order?

Depth at Gauging Station Example

With values

With units

Only example

Here is how the Depth at Gauging Station equation looks like with Values.

Here is how the Depth at Gauging Station equation looks like with Units.

Here is how the Depth at Gauging Station equation looks like.

6.01 = 0.1 + 0.05 \cdot (3) + {2.4}^{2}

6.01m = 0.1m + 0.05m \cdot (3m³/s) + {2.4}^{2}

6.01 = 0.1 + 0.05 \cdot (3) + {2.4}^{2}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Engineering Hydrology » fx Depth at Gauging Station

Depth at Gauging Station Solution

Follow our step by step solution on how to calculate Depth at Gauging Station?

FIRST Step Consider the formula

h G = h csf + H c \cdot (Q) + {Q 2}^{2}

Next Step Substitute values of Variables

∴

h G = 0.1m + 0.05m \cdot (3m³/s) + {2.4}^{2}

Next Step Prepare to Evaluate

∴

h G = 0.1 + 0.05 \cdot (3) + {2.4}^{2}

LAST Step Evaluate

∴

h G = 6.01m

Depth at Gauging Station Formula Elements

Variables

Depth at Gauging Station

Depth at Gauging Station where the hydraulics of a downstream control and a gauging station are considered.

Symbol: h_G

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Depth at Gauging Station

Cease-to-Flow Depth

Cease-to-Flow Depth when hydraulics of a downstream control and a gauging station are considered.

Symbol: h_csf

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Cease-to-Flow Depth

Head at Control

Head at Control shown as a function of discharge Q.

Symbol: H_c

Measurement: LengthUnit: m

Note: Value can be positive or negative.

Formulas to find Head at Control

Discharge

The Discharge refers to the volumetric flow rate of water that is transported through a given cross-sectional area. It includes any suspended solids, dissolved chemicals, or biologic material.

Symbol: Q

Measurement: Volumetric Flow RateUnit: m³/s

Note: Value should be greater than 0.

Formulas to find Discharge

Terms of Order

Terms of Order give the head loss between the gauging station and the control.

Symbol: Q²

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Terms of Order

Other formulas in Low Flow category

Go Cease to Flow Depth given Depth at Gauging Station

h csf = h G - H c \cdot (Q) - {Q 2}^{2}

Go Head at Control given Depth at Gauging Station

H c = \frac{h G - h csf - {Q 2}^{2}}{Q}

Go Discharge given Depth at Gauging Station

Q = \frac{h G - h csf - {Q 2}^{2}}{H c}

How to Evaluate Depth at Gauging Station?

Depth at Gauging Station evaluator uses Depth at Gauging Station = Cease-to-Flow Depth+Head at Control*(Discharge)+Terms of Order^2 to evaluate the Depth at Gauging Station, The Depth at gauging station formula is defined as the hydraulics of a downstream control and a gauging station are considered. Depth at Gauging Station is denoted by h_G symbol.

How to evaluate Depth at Gauging Station using this online evaluator? To use this online evaluator for Depth at Gauging Station, enter Cease-to-Flow Depth (h_csf), Head at Control (H_c), Discharge (Q) & Terms of Order (Q²) and hit the calculate button.

FAQs on Depth at Gauging Station

What is the formula to find Depth at Gauging Station?

The formula of Depth at Gauging Station is expressed as Depth at Gauging Station = Cease-to-Flow Depth+Head at Control*(Discharge)+Terms of Order^2. Here is an example- 6.01 = 0.1+0.05*(3)+2.4^2.

How to calculate Depth at Gauging Station?

With Cease-to-Flow Depth (h_csf), Head at Control (H_c), Discharge (Q) & Terms of Order (Q²) we can find Depth at Gauging Station using the formula - Depth at Gauging Station = Cease-to-Flow Depth+Head at Control*(Discharge)+Terms of Order^2.

Can the Depth at Gauging Station be negative?

No, the Depth at Gauging Station, measured in Length cannot be negative.

Which unit is used to measure Depth at Gauging Station?

Depth at Gauging Station is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Depth at Gauging Station can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Depth at Gauging Station Formula

Depth at Gauging Station Example

Depth at Gauging Station Solution

Depth at Gauging Station Formula Elements

Other formulas in Low Flow category

How to Evaluate Depth at Gauging Station?

FAQs on Depth at Gauging Station

Variable Name