FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Cycle Time given Trips per Hour for Excavating Scrap Formula

Fx Copy

LaTeX Copy

Cycle Time is the time taken to complete one trip. Check FAQs

C t = (\frac{W T}{f})

C_t - Cycle Time?W_T - Working Time in Scraper Production?f - Trips per Hour?

Cycle Time given Trips per Hour for Excavating Scrap Example

With values

With units

Only example

Here is how the Cycle Time given Trips per Hour for Excavating Scrap equation looks like with Values.

Here is how the Cycle Time given Trips per Hour for Excavating Scrap equation looks like with Units.

Here is how the Cycle Time given Trips per Hour for Excavating Scrap equation looks like.

5.7 = (\frac{22.8}{4})

5.7h = (\frac{22.8}{4rev/h})

5.7 = (\frac{22.8}{4})

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Geotechnical Engineering » fx Cycle Time given Trips per Hour for Excavating Scrap

Cycle Time given Trips per Hour for Excavating Scrap Solution

Follow our step by step solution on how to calculate Cycle Time given Trips per Hour for Excavating Scrap?

FIRST Step Consider the formula

C t = (\frac{W T}{f})

Next Step Substitute values of Variables

∴

C t = (\frac{22.8}{4rev/h})

Next Step Convert Units

∴

C t = (\frac{22.8}{0.0011Hz})

Next Step Prepare to Evaluate

∴

C t = (\frac{22.8}{0.0011})

Next Step Evaluate

∴

C t = 20520s

Next Step Convert to Output's Unit

∴

C t = 5.70000000000001h

LAST Step Rounding Answer

∴

C t = 5.7h

Cycle Time given Trips per Hour for Excavating Scrap Formula Elements

Variables

Cycle Time

Cycle Time is the time taken to complete one trip.

Symbol: C_t

Measurement: TimeUnit: h

Note: Value should be greater than 0.

Formulas to find Cycle Time

Working Time in Scraper Production

Working Time in Scraper Production is the ratio of time which is expressed in hr/hr.

Symbol: W_T

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Working Time in Scraper Production

Trips per Hour

Trips per Hour means the total transfer occured in a hour.

Symbol: f

Measurement: FrequencyUnit: rev/h

Note: Value should be greater than 0.

Formulas to find Trips per Hour

Other formulas in Scraper Production category

Go Production of Scrap by Machines

P s = (L \cdot f)

Go Load Given Production of Scrap by Machines

L = (\frac{P s}{f})

Go Trips per Hour given Production of Scrap by Machines

f = (\frac{P s}{L})

Go Trips per Hour for Excavating Scrap

f = (\frac{W T}{C t})

How to Evaluate Cycle Time given Trips per Hour for Excavating Scrap?

Cycle Time given Trips per Hour for Excavating Scrap evaluator uses Cycle Time = (Working Time in Scraper Production/Trips per Hour) to evaluate the Cycle Time, The Cycle Time given Trips per Hour For Excavating Scrap is defined as the amount of time actually required to complete the work. Cycle Time is denoted by C_t symbol.

How to evaluate Cycle Time given Trips per Hour for Excavating Scrap using this online evaluator? To use this online evaluator for Cycle Time given Trips per Hour for Excavating Scrap, enter Working Time in Scraper Production (W_T) & Trips per Hour (f) and hit the calculate button.

FAQs on Cycle Time given Trips per Hour for Excavating Scrap

What is the formula to find Cycle Time given Trips per Hour for Excavating Scrap?

The formula of Cycle Time given Trips per Hour for Excavating Scrap is expressed as Cycle Time = (Working Time in Scraper Production/Trips per Hour). Here is an example- 0.001583 = (22.8/0.00111111111111111).

How to calculate Cycle Time given Trips per Hour for Excavating Scrap?

With Working Time in Scraper Production (W_T) & Trips per Hour (f) we can find Cycle Time given Trips per Hour for Excavating Scrap using the formula - Cycle Time = (Working Time in Scraper Production/Trips per Hour).

Can the Cycle Time given Trips per Hour for Excavating Scrap be negative?

No, the Cycle Time given Trips per Hour for Excavating Scrap, measured in Time cannot be negative.

Which unit is used to measure Cycle Time given Trips per Hour for Excavating Scrap?

Cycle Time given Trips per Hour for Excavating Scrap is usually measured using the Hour[h] for Time. Second[h], Millisecond[h], Microsecond[h] are the few other units in which Cycle Time given Trips per Hour for Excavating Scrap can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Cycle Time given Trips per Hour for Excavating Scrap Formula

Cycle Time given Trips per Hour for Excavating Scrap Example

Cycle Time given Trips per Hour for Excavating Scrap Solution

Cycle Time given Trips per Hour for Excavating Scrap Formula Elements

Other formulas in Scraper Production category

How to Evaluate Cycle Time given Trips per Hour for Excavating Scrap?

FAQs on Cycle Time given Trips per Hour for Excavating Scrap

Variable Name