FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered Formula

Fx Copy

LaTeX Copy

The Cross-Sectional Area is referred as product of width multiplied by average water depth. Check FAQs

A = \frac{Q}{K \cdot (\frac{ΔH}{L})}

A - Cross-Sectional Area?Q - Discharge?K - Coefficient of Permeability at 20° C?ΔH - Constant Head Difference?L - Length?

Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered Example

With values

With units

Only example

Here is how the Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered equation looks like with Values.

Here is how the Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered equation looks like with Units.

Here is how the Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered equation looks like.

97.5 = \frac{3}{6 \cdot (\frac{2}{3.9})}

97.5m² = \frac{3m³/s}{6cm/s \cdot (\frac{2}{3.9m})}

97.5 = \frac{3}{6 \cdot (\frac{2}{3.9})}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Engineering Hydrology » fx Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered

Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered Solution

Follow our step by step solution on how to calculate Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered?

FIRST Step Consider the formula

A = \frac{Q}{K \cdot (\frac{ΔH}{L})}

Next Step Substitute values of Variables

∴

A = \frac{3m³/s}{6cm/s \cdot (\frac{2}{3.9m})}

Next Step Convert Units

∴

A = \frac{3m³/s}{0.06m/s \cdot (\frac{2}{3.9m})}

Next Step Prepare to Evaluate

∴

A = \frac{3}{0.06 \cdot (\frac{2}{3.9})}

LAST Step Evaluate

∴

A = 97.5m²

Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered Formula Elements

Variables

Cross-Sectional Area

The Cross-Sectional Area is referred as product of width multiplied by average water depth.

Symbol: A

Measurement: AreaUnit: m²

Note: Value should be greater than 0.

Formulas to find Cross-Sectional Area

Discharge

The Discharge referred as volumetric flow rate of water that is transported through a given cross-sectional area. It includes any suspended solids, dissolved chemicals, or biologic material.

Symbol: Q

Measurement: Volumetric Flow RateUnit: m³/s

Note: Value should be greater than 0.

Formulas to find Discharge

Coefficient of Permeability at 20° C

The Coefficient of Permeability at 20° C refers to the measure of a porous medium’s ability to allow fluid flow through its voids.

Symbol: K

Measurement: SpeedUnit: cm/s

Note: Value should be greater than 0.

Formulas to find Coefficient of Permeability at 20° C

Constant Head Difference

The Constant Head Difference is referred as difference between the hydraulic head or pressure difference separated by a small distance dl.

Symbol: ΔH

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Constant Head Difference

Length

The Length referred as measurement or extent of something from end to end.

Symbol: L

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Length

Other formulas in Coefficient of Permeability category

Go Coefficient of Permeability from Analogy of Laminar Flow (Hagen Poiseuille flow)

K H-P = C \cdot ({d m}^{2}) \cdot \frac{\frac{γ}{1000}}{μ}

Go Hagen Poiseuille Flow or Mean Particle Size of Porous Medium Laminar Flow through Conduit

d m = \sqrt{\frac{K H-P \cdot μ}{C \cdot (\frac{γ}{1000})}}

Go Unit weight of fluid

γ = ρ fluid \cdot g

Go Dynamic Viscosity of Fluid of Laminar Flow through Conduit or Hagen Poiseuille Flow

μ = (C \cdot {d m}^{2}) \cdot (\frac{\frac{γ}{1000}}{K H-P})

How to Evaluate Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered?

Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered evaluator uses Cross-Sectional Area = Discharge/(Coefficient of Permeability at 20° C*(Constant Head Difference/Length)) to evaluate the Cross-Sectional Area, The Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered formula is defined as an area of land where all water flows to a single stream, river, lake or even ocean. Cross-Sectional Area is denoted by A symbol.

How to evaluate Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered using this online evaluator? To use this online evaluator for Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered, enter Discharge (Q), Coefficient of Permeability at 20° C (K), Constant Head Difference (ΔH) & Length (L) and hit the calculate button.

FAQs on Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered

What is the formula to find Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered?

The formula of Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered is expressed as Cross-Sectional Area = Discharge/(Coefficient of Permeability at 20° C*(Constant Head Difference/Length)). Here is an example- 97.5 = 3/(0.06*(2/3.9)).

How to calculate Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered?

With Discharge (Q), Coefficient of Permeability at 20° C (K), Constant Head Difference (ΔH) & Length (L) we can find Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered using the formula - Cross-Sectional Area = Discharge/(Coefficient of Permeability at 20° C*(Constant Head Difference/Length)).

Can the Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered be negative?

No, the Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered, measured in Area cannot be negative.

Which unit is used to measure Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered?

Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered is usually measured using the Square Meter[m²] for Area. Square Kilometer[m²], Square Centimeter[m²], Square Millimeter[m²] are the few other units in which Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered Formula

Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered Example

Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered Solution

Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered Formula Elements

Other formulas in Coefficient of Permeability category

How to Evaluate Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered?

FAQs on Cross-Sectional Area when Coefficient of Permeability at Permeameter Experiment is Considered

Variable Name