FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Cross-Sectional Area of Inner Spring given Axial force transmitted Formula

GoCross-sectional Area of Inner Spring Wire Formula

Fx Copy

LaTeX Copy

Cross-Sectional Area of Inner Spring is defined as the area of the cross-section of the wire by which the inner spring is made. Check FAQs

a 2 = a 1 \cdot \frac{P 2}{P 1}

a₂ - Cross-Sectional Area of Inner Spring?a₁ - Cross-Sectional Area of Outer Spring?P₂ - Force Transmitted by Inner Spring?P₁ - Force Transmitted by Outer Spring?

Cross-Sectional Area of Inner Spring given Axial force transmitted Example

With values

With units

Only example

Here is how the Cross-Sectional Area of Inner Spring given Axial force transmitted equation looks like with Values.

Here is how the Cross-Sectional Area of Inner Spring given Axial force transmitted equation looks like with Units.

Here is how the Cross-Sectional Area of Inner Spring given Axial force transmitted equation looks like.

19.6646 = 33.2 \cdot \frac{770}{1300}

19.6646mm² = 33.2mm² \cdot \frac{770N}{1300N}

19.6646 = 33.2 \cdot \frac{770}{1300}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Design of Automobile Elements » fx Cross-Sectional Area of Inner Spring given Axial force transmitted

Cross-Sectional Area of Inner Spring given Axial force transmitted Solution

Follow our step by step solution on how to calculate Cross-Sectional Area of Inner Spring given Axial force transmitted?

FIRST Step Consider the formula

a 2 = a 1 \cdot \frac{P 2}{P 1}

Next Step Substitute values of Variables

∴

a 2 = 33.2mm² \cdot \frac{770N}{1300N}

Next Step Convert Units

∴

a 2 = 3.3E-5m² \cdot \frac{770N}{1300N}

Next Step Prepare to Evaluate

∴

a 2 = 3.3E-5 \cdot \frac{770}{1300}

Next Step Evaluate

∴

a 2 = 1.96646153846154E-05m²

Next Step Convert to Output's Unit

∴

a 2 = 19.6646153846154mm²

LAST Step Rounding Answer

∴

a 2 = 19.6646mm²

Cross-Sectional Area of Inner Spring given Axial force transmitted Formula Elements

Variables

Cross-Sectional Area of Inner Spring

Cross-Sectional Area of Inner Spring is defined as the area of the cross-section of the wire by which the inner spring is made.

Symbol: a₂

Measurement: AreaUnit: mm²

Note: Value should be greater than 0.

Formulas to find Cross-Sectional Area of Inner Spring

Cross-Sectional Area of Outer Spring

Cross-Sectional Area of Outer Spring is defined as the area of the cross-section of the wire by which the outer spring is made.

Symbol: a₁

Measurement: AreaUnit: mm²

Note: Value should be greater than 0.

Formulas to find Cross-Sectional Area of Outer Spring

Force Transmitted by Inner Spring

Force Transmitted by Inner Spring is defined as the axial force transmitted by the innermost spring in the concentric springs.

Symbol: P₂

Measurement: ForceUnit: N

Note: Value should be greater than 0.

Formulas to find Force Transmitted by Inner Spring

Force Transmitted by Outer Spring

Force Transmitted by Outer Spring is defined as the axial force transmitted by the outermost spring in the concentric springs.

Symbol: P₁

Measurement: ForceUnit: N

Note: Value should be greater than 0.

Formulas to find Force Transmitted by Outer Spring

Other Formulas to find Cross-Sectional Area of Inner Spring

Go Cross-sectional Area of Inner Spring Wire

a 2 = π \cdot {d 2}^{2}

Other formulas in Concentric Springs category

Go Axial Force transmitted by Outer Spring

P 1 = P 2 \cdot \frac{{d 1}^{2}}{{d 2}^{2}}

Go Wire Diameter of Outer Spring given Axial Force transmitted by Outer Spring

d 1 = \sqrt{P 1 \cdot \frac{{d 2}^{2}}{P 2}}

Go Wire Diameter of Inner Spring given Axial Force transmitted by Outer Spring

d 2 = \sqrt{P 2 \cdot \frac{{d 1}^{2}}{P 1}}

Go Axial Force transmitted by Inner Spring

P 2 = \frac{{d 2}^{2} \cdot P 1}{{d 1}^{2}}

How to Evaluate Cross-Sectional Area of Inner Spring given Axial force transmitted?

Cross-Sectional Area of Inner Spring given Axial force transmitted evaluator uses Cross-Sectional Area of Inner Spring = Cross-Sectional Area of Outer Spring*Force Transmitted by Inner Spring/Force Transmitted by Outer Spring to evaluate the Cross-Sectional Area of Inner Spring, Cross-Sectional Area of Inner Spring given Axial force transmitted formula is defined as a measure of the inner spring's cross-sectional area in response to the axial force transmitted, providing insight into the spring's structural integrity and load-carrying capacity in helical spring applications. Cross-Sectional Area of Inner Spring is denoted by a₂ symbol.

How to evaluate Cross-Sectional Area of Inner Spring given Axial force transmitted using this online evaluator? To use this online evaluator for Cross-Sectional Area of Inner Spring given Axial force transmitted, enter Cross-Sectional Area of Outer Spring (a₁), Force Transmitted by Inner Spring (P₂) & Force Transmitted by Outer Spring (P₁) and hit the calculate button.

FAQs on Cross-Sectional Area of Inner Spring given Axial force transmitted

What is the formula to find Cross-Sectional Area of Inner Spring given Axial force transmitted?

The formula of Cross-Sectional Area of Inner Spring given Axial force transmitted is expressed as Cross-Sectional Area of Inner Spring = Cross-Sectional Area of Outer Spring*Force Transmitted by Inner Spring/Force Transmitted by Outer Spring. Here is an example- 2.9E+7 = 3.32E-05*930.7692/1075.455.

How to calculate Cross-Sectional Area of Inner Spring given Axial force transmitted?

With Cross-Sectional Area of Outer Spring (a₁), Force Transmitted by Inner Spring (P₂) & Force Transmitted by Outer Spring (P₁) we can find Cross-Sectional Area of Inner Spring given Axial force transmitted using the formula - Cross-Sectional Area of Inner Spring = Cross-Sectional Area of Outer Spring*Force Transmitted by Inner Spring/Force Transmitted by Outer Spring.

What are the other ways to Calculate Cross-Sectional Area of Inner Spring?

Here are the different ways to Calculate Cross-Sectional Area of Inner Spring-

Cross-Sectional Area of Inner Spring=pi*Wire Diameter of Inner Spring^2

Can the Cross-Sectional Area of Inner Spring given Axial force transmitted be negative?

No, the Cross-Sectional Area of Inner Spring given Axial force transmitted, measured in Area cannot be negative.

Which unit is used to measure Cross-Sectional Area of Inner Spring given Axial force transmitted?

Cross-Sectional Area of Inner Spring given Axial force transmitted is usually measured using the Square Millimeter[mm²] for Area. Square Meter[mm²], Square Kilometer[mm²], Square Centimeter[mm²] are the few other units in which Cross-Sectional Area of Inner Spring given Axial force transmitted can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Cross-Sectional Area of Inner Spring given Axial force transmitted Formula

​GoCross-sectional Area of Inner Spring Wire Formula

Cross-Sectional Area of Inner Spring given Axial force transmitted Example

Cross-Sectional Area of Inner Spring given Axial force transmitted Solution

Cross-Sectional Area of Inner Spring given Axial force transmitted Formula Elements

Other Formulas to find Cross-Sectional Area of Inner Spring

Other formulas in Concentric Springs category

How to Evaluate Cross-Sectional Area of Inner Spring given Axial force transmitted?

FAQs on Cross-Sectional Area of Inner Spring given Axial force transmitted

Variable Name

GoCross-sectional Area of Inner Spring Wire Formula