FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Cross Sectional Area for given Work Done by Jet per Second Formula

GoCross Section Area for Mass of Fluid Striking Plate Formula

GoCross Sectional Area for given Dynamic Thrust Exerted by Jet on Plate Formula

Fx Copy

LaTeX Copy

Cross Sectional Area of Jet is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point. Check FAQs

A Jet = \frac{Ft \cdot G}{γ f \cdot {(V absolute - v jet)}^{2} \cdot V j \cdot {∠D}^{2}}

A_Jet - Cross Sectional Area of Jet?Ft - Thrust Force?G - Specific Gravity of Fluid?γ_f - Specific Weight of Liquid?V_absolute - Absolute Velocity of Issuing Jet?v_jet - Fluid Jet Velocity?V_j - Jet Velocity?∠D - Angle between Jet and Plate?

Cross Sectional Area for given Work Done by Jet per Second Example

With values

With units

Only example

Here is how the Cross Sectional Area for given Work Done by Jet per Second equation looks like with Values.

Here is how the Cross Sectional Area for given Work Done by Jet per Second equation looks like with Units.

Here is how the Cross Sectional Area for given Work Done by Jet per Second equation looks like.

0.4256 = \frac{0.5 \cdot 10}{9.81 \cdot {(10.1 - 12)}^{2} \cdot 9 \cdot 11^{2}}

0.4256m² = \frac{0.5kN \cdot 10}{9.81kN/m³ \cdot {(10.1m/s - 12m/s)}^{2} \cdot 9m/s \cdot {11°}^{2}}

0.4256 = \frac{0.5 \cdot 10}{9.81 \cdot {(10.1 - 12)}^{2} \cdot 9 \cdot 11^{2}}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Hydraulics and Waterworks » fx Cross Sectional Area for given Work Done by Jet per Second

Cross Sectional Area for given Work Done by Jet per Second Solution

Follow our step by step solution on how to calculate Cross Sectional Area for given Work Done by Jet per Second?

FIRST Step Consider the formula

A Jet = \frac{Ft \cdot G}{γ f \cdot {(V absolute - v jet)}^{2} \cdot V j \cdot {∠D}^{2}}

Next Step Substitute values of Variables

∴

A Jet = \frac{0.5kN \cdot 10}{9.81kN/m³ \cdot {(10.1m/s - 12m/s)}^{2} \cdot 9m/s \cdot {11°}^{2}}

Next Step Convert Units

∴

A Jet = \frac{0.5kN \cdot 10}{9.81kN/m³ \cdot {(10.1m/s - 12m/s)}^{2} \cdot 9m/s \cdot {0.192rad}^{2}}

Next Step Prepare to Evaluate

∴

A Jet = \frac{0.5 \cdot 10}{9.81 \cdot {(10.1 - 12)}^{2} \cdot 9 \cdot {0.192}^{2}}

Next Step Evaluate

∴

A Jet = 0.425609369523608m²

LAST Step Rounding Answer

∴

A Jet = 0.4256m²

Cross Sectional Area for given Work Done by Jet per Second Formula Elements

Variables

Cross Sectional Area of Jet

Cross Sectional Area of Jet is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.

Symbol: A_Jet

Measurement: AreaUnit: m²

Note: Value should be greater than 0.

Formulas to find Cross Sectional Area of Jet

Thrust Force

Thrust Force acting perpendicular to the job piece.

Symbol: Ft

Measurement: ForceUnit: kN

Note: Value should be greater than 0.

Formulas to find Thrust Force

Specific Gravity of Fluid

Specific Gravity of Fluid is the ratio of the specific weight of a substance to the specific weight of a standard fluid.

Symbol: G

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Specific Gravity of Fluid

Specific Weight of Liquid

The Specific Weight of Liquid refers to the weight per unit volume of that substance.

Symbol: γ_f

Measurement: Specific WeightUnit: kN/m³

Note: Value should be greater than 0.

Formulas to find Specific Weight of Liquid

Absolute Velocity of Issuing Jet

Absolute Velocity of Issuing Jet is actual velocity of jet used in propeller.

Symbol: V_absolute

Measurement: SpeedUnit: m/s

Note: Value can be positive or negative.

Formulas to find Absolute Velocity of Issuing Jet

Fluid Jet Velocity

Fluid Jet Velocity is the volume of fluid flowing in the given vessel per unit cross sectional area.

Symbol: v_jet

Measurement: SpeedUnit: m/s

Note: Value should be greater than 0.

Formulas to find Fluid Jet Velocity

Jet Velocity

Jet Velocity can be described as the movement of the plate in meters per second.

Symbol: V_j

Measurement: SpeedUnit: m/s

Note: Value can be positive or negative.

Formulas to find Jet Velocity

Angle between Jet and Plate

Angle between Jet and Plate is the space between two intersecting lines or surfaces at or close to the point where they meet.

Symbol: ∠D

Measurement: AngleUnit: °

Note: Value can be positive or negative.

Formulas to find Angle between Jet and Plate

Other Formulas to find Cross Sectional Area of Jet

Go Cross Section Area for Mass of Fluid Striking Plate

A Jet = \frac{m f \cdot G}{γ f \cdot (V absolute - v)}

Go Cross Sectional Area for given Dynamic Thrust Exerted by Jet on Plate

A Jet = \frac{m f \cdot G}{γ f \cdot (∠D \cdot (\frac{180}{π})) \cdot {(V absolute - v jet)}^{2}}

How to Evaluate Cross Sectional Area for given Work Done by Jet per Second?

Cross Sectional Area for given Work Done by Jet per Second evaluator uses Cross Sectional Area of Jet = (Thrust Force*Specific Gravity of Fluid)/(Specific Weight of Liquid*(Absolute Velocity of Issuing Jet-Fluid Jet Velocity)^2*Jet Velocity*Angle between Jet and Plate^2) to evaluate the Cross Sectional Area of Jet, The Cross Sectional Area for given Work Done by Jet per Second is the area of a two-dimensional shape that is obtained when a three-dimensional object - such as a cylinder. Definition. Cross Sectional Area of Jet is denoted by A_Jet symbol.

How to evaluate Cross Sectional Area for given Work Done by Jet per Second using this online evaluator? To use this online evaluator for Cross Sectional Area for given Work Done by Jet per Second, enter Thrust Force (Ft), Specific Gravity of Fluid (G), Specific Weight of Liquid (γ_f), Absolute Velocity of Issuing Jet (V_absolute), Fluid Jet Velocity (v_jet), Jet Velocity (V_j) & Angle between Jet and Plate (∠D) and hit the calculate button.

FAQs on Cross Sectional Area for given Work Done by Jet per Second

What is the formula to find Cross Sectional Area for given Work Done by Jet per Second?

The formula of Cross Sectional Area for given Work Done by Jet per Second is expressed as Cross Sectional Area of Jet = (Thrust Force*Specific Gravity of Fluid)/(Specific Weight of Liquid*(Absolute Velocity of Issuing Jet-Fluid Jet Velocity)^2*Jet Velocity*Angle between Jet and Plate^2). Here is an example- 0.384112 = (500*10)/(9810*(10.1-12)^2*9*0.19198621771934^2).

How to calculate Cross Sectional Area for given Work Done by Jet per Second?

With Thrust Force (Ft), Specific Gravity of Fluid (G), Specific Weight of Liquid (γ_f), Absolute Velocity of Issuing Jet (V_absolute), Fluid Jet Velocity (v_jet), Jet Velocity (V_j) & Angle between Jet and Plate (∠D) we can find Cross Sectional Area for given Work Done by Jet per Second using the formula - Cross Sectional Area of Jet = (Thrust Force*Specific Gravity of Fluid)/(Specific Weight of Liquid*(Absolute Velocity of Issuing Jet-Fluid Jet Velocity)^2*Jet Velocity*Angle between Jet and Plate^2).

What are the other ways to Calculate Cross Sectional Area of Jet?

Here are the different ways to Calculate Cross Sectional Area of Jet-

Cross Sectional Area of Jet=(Fluid Mass*Specific Gravity of Fluid)/(Specific Weight of Liquid*(Absolute Velocity of Issuing Jet-Velocity of Jet))
Cross Sectional Area of Jet=(Fluid Mass*Specific Gravity of Fluid)/(Specific Weight of Liquid*(Angle between Jet and Plate*(180/pi))*(Absolute Velocity of Issuing Jet-Fluid Jet Velocity)^2)
Cross Sectional Area of Jet=(Thrust Force*Specific Gravity of Fluid)/(Specific Weight of Liquid*(Absolute Velocity of Issuing Jet-Velocity of Jet)^2*(Angle between Jet and Plate*(180/pi))*cos(Theta))

Can the Cross Sectional Area for given Work Done by Jet per Second be negative?

No, the Cross Sectional Area for given Work Done by Jet per Second, measured in Area cannot be negative.

Which unit is used to measure Cross Sectional Area for given Work Done by Jet per Second?

Cross Sectional Area for given Work Done by Jet per Second is usually measured using the Square Meter[m²] for Area. Square Kilometer[m²], Square Centimeter[m²], Square Millimeter[m²] are the few other units in which Cross Sectional Area for given Work Done by Jet per Second can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Cross Sectional Area for given Work Done by Jet per Second Formula

​GoCross Section Area for Mass of Fluid Striking Plate Formula

​GoCross Sectional Area for given Dynamic Thrust Exerted by Jet on Plate Formula

Cross Sectional Area for given Work Done by Jet per Second Example

Cross Sectional Area for given Work Done by Jet per Second Solution

Cross Sectional Area for given Work Done by Jet per Second Formula Elements

Other Formulas to find Cross Sectional Area of Jet

How to Evaluate Cross Sectional Area for given Work Done by Jet per Second?

FAQs on Cross Sectional Area for given Work Done by Jet per Second

Variable Name

GoCross Section Area for Mass of Fluid Striking Plate Formula

GoCross Sectional Area for given Dynamic Thrust Exerted by Jet on Plate Formula