FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Correction Length for Square Fin with Non-Adiabatic Tip Formula

Fx Copy

LaTeX Copy

Correction Length for Sqaure Fin refers to the distance from the fin base to the location where the temperature profile deviates from the idealized uniform temperature distribution along the fin. Check FAQs

L sqaure = L fin + (\frac{w fin}{4})

L_sqaure - Correction Length for Sqaure Fin?L_fin - Length of Fin?w_fin - Width of Fin?

Correction Length for Square Fin with Non-Adiabatic Tip Example

With values

With units

Only example

Here is how the Correction Length for Square Fin with Non-Adiabatic Tip equation looks like with Values.

Here is how the Correction Length for Square Fin with Non-Adiabatic Tip equation looks like with Units.

Here is how the Correction Length for Square Fin with Non-Adiabatic Tip equation looks like.

4.75 = 3 + (\frac{7}{4})

4.75m = 3m + (\frac{7m}{4})

4.75 = 3 + (\frac{7}{4})

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Chemical Engineering » Category

Heat Transfer » fx Correction Length for Square Fin with Non-Adiabatic Tip

Correction Length for Square Fin with Non-Adiabatic Tip Solution

Follow our step by step solution on how to calculate Correction Length for Square Fin with Non-Adiabatic Tip?

FIRST Step Consider the formula

L sqaure = L fin + (\frac{w fin}{4})

Next Step Substitute values of Variables

∴

L sqaure = 3m + (\frac{7m}{4})

Next Step Prepare to Evaluate

∴

L sqaure = 3 + (\frac{7}{4})

LAST Step Evaluate

∴

L sqaure = 4.75m

Correction Length for Square Fin with Non-Adiabatic Tip Formula Elements

Variables

Correction Length for Sqaure Fin

Correction Length for Sqaure Fin refers to the distance from the fin base to the location where the temperature profile deviates from the idealized uniform temperature distribution along the fin.

Symbol: L_sqaure

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Correction Length for Sqaure Fin

Length of Fin

Length of Fin is the measurement of fin.

Symbol: L_fin

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Length of Fin

Width of Fin

Width of Fin is the measurement or extent of fin from side to side.

Symbol: w_fin

Measurement: LengthUnit: m

Note: Value can be positive or negative.

Formulas to find Width of Fin

Other formulas in Heat Transfer from Extended Surfaces (Fins) category

Go Biot Number using Characteristic Length

Bi = \frac{h transfer \cdot L char}{k fin}

Go Correction Length for Cylindrical Fin with Non-Adiabatic Tip

L cylindrical = L fin + (\frac{d fin}{4})

Go Correction Length for Thin Rectangular Fin with Non-Adiabatic Tip

L rectangular = L fin + (\frac{t fin}{2})

Go Heat Dissipation from Fin Insulated at End Tip

Q fin = (\sqrt{(P fin \cdot h transfer \cdot k fin \cdot A c)}) \cdot (T w - T s) \cdot \tanh ((\sqrt{\frac{P fin \cdot h transfer}{k fin \cdot A c}}) \cdot L fin)

How to Evaluate Correction Length for Square Fin with Non-Adiabatic Tip?

Correction Length for Square Fin with Non-Adiabatic Tip evaluator uses Correction Length for Sqaure Fin = Length of Fin+(Width of Fin/4) to evaluate the Correction Length for Sqaure Fin, Correction Length for Square Fin with Non-Adiabatic Tip refers to the distance from the fin base to the location where the temperature profile deviates significantly from the idealized uniform temperature distribution along the fin. Correction Length for Sqaure Fin is denoted by L_sqaure symbol.

How to evaluate Correction Length for Square Fin with Non-Adiabatic Tip using this online evaluator? To use this online evaluator for Correction Length for Square Fin with Non-Adiabatic Tip, enter Length of Fin (L_fin) & Width of Fin (w_fin) and hit the calculate button.

FAQs on Correction Length for Square Fin with Non-Adiabatic Tip

What is the formula to find Correction Length for Square Fin with Non-Adiabatic Tip?

The formula of Correction Length for Square Fin with Non-Adiabatic Tip is expressed as Correction Length for Sqaure Fin = Length of Fin+(Width of Fin/4). Here is an example- 4.75 = 3+(7/4).

How to calculate Correction Length for Square Fin with Non-Adiabatic Tip?

With Length of Fin (L_fin) & Width of Fin (w_fin) we can find Correction Length for Square Fin with Non-Adiabatic Tip using the formula - Correction Length for Sqaure Fin = Length of Fin+(Width of Fin/4).

Can the Correction Length for Square Fin with Non-Adiabatic Tip be negative?

No, the Correction Length for Square Fin with Non-Adiabatic Tip, measured in Length cannot be negative.

Which unit is used to measure Correction Length for Square Fin with Non-Adiabatic Tip?

Correction Length for Square Fin with Non-Adiabatic Tip is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Correction Length for Square Fin with Non-Adiabatic Tip can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Correction Length for Square Fin with Non-Adiabatic Tip Formula

Correction Length for Square Fin with Non-Adiabatic Tip Example

Correction Length for Square Fin with Non-Adiabatic Tip Solution

Correction Length for Square Fin with Non-Adiabatic Tip Formula Elements

Other formulas in Heat Transfer from Extended Surfaces (Fins) category

How to Evaluate Correction Length for Square Fin with Non-Adiabatic Tip?

FAQs on Correction Length for Square Fin with Non-Adiabatic Tip

Variable Name